• Nuclear Engineering and Technology
• /
• 제32권6호
• /
• pp.559-565
• /
• 2000

The sintering behavior of UO$_2$-Gd$_2$O$_3$fuel pellets under H$_2$gas has been investigated using dilatometry and XRD methods. The addition of TiO$_2$or Al(OH)$_3$increased the density and grain size. A density of 95% TD and a grain size larger than 6 ${\mu}{\textrm}{m}$ are achieved by the addition of 0.1 wt% TiO$_2$or Al(OH)$_3$. It was found that the densification of UO$_2$-Gd$_2$O$_3$pellets was suppressed in the temperature range of 1300 to 150$0^{\circ}C$, compared to UO$_2$pellets. The formation of a (U,Gd)O$_2$solid solution is the main reason for the suppression of densification. The role of TiO$_2$in densification and grain growth is discussed on the basis of the densification cuwe and ceramography.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2001년도 춘계학술대회 발표논문집
• /
• pp.40-46
• /
• 2001

A1₂TiO/sub 5/ 세라믹스의 열적 안정성은 MgO와 고온 arc용융노에서 MgAl₂O₄ spinel과 같은 고용체를 이루고, SiO₂, ZrO₂와 α-Al₂O₃등의 첨가제로 입자크기와 미세 균열을 감소시킴으로서 증가시킨다. A1₂TiO/sub 5/ 세라믹스의 낮은 열팽창 특성은 상이한 열팽창으로 hysteresis 곡선을 나타내며 이 현상은 미세균열의 opening과 closing으로 설명된다. 이들의 열팽창 곡선, 소성온도에 EK른 관계를 dilatometer로 연구하였다.

• Journal of Pharmaceutical Investigation
• /
• 제23권1호
• /
• pp.11-18
• /
• 1993

Inclusion complex of ibuprofen with $2-Hydroxypropyl-{\beta}-cyclodextrin\;(HP-{\beta}-CD)$ in aqueous solution and in the solid state was evaluated by the solubility method and the instrumental analysis such as infrared spectroscopy, thermal analysis and x-ray diffractometry. The aqueous solubility of ibuprofen was increased linearly with the increase in the concentration of $HP-{\beta}-CD$, showing an $A_L$ type phase solubility diagram. The results showed that the dissolution rate of ibuprofen was significantly increased by complexation with $HP-{\beta}-CD$. $Ibuprofen-HP-{\beta}-CD$ complex enhanced the mean plasma concentration levels and the area under plasma concentration-time curve after oral administration compared to those of the drug alone. It is concluded that the complex of ibuprofen with $HP-{\beta}-CD$ increases the dissolution rate and improves the bioavailability of the ibuprofen by the formation of a water-soluble complex.

• 대한금속재료학회지
• /
• 제48권11호
• /
• pp.981-988
• /
• 2010

The effects of Cr and Al contents in Fe-Al and Fe-Cr alloys on oxidation resistance, hardness, and the thermal expansion coefficient were investigated. Fe-Al and Fe-Cr alloys above 10wt.%Al and 20wt.%Cr contents have a high oxidation resistance. The hardness of the Fe-Al and Fe-Cr alloys increased with an increase in Al and Cr contents due to solid solution or formation of an intermetallic compound. The coefficients of thermal expansion of the Fe-Al alloys were higher than those of the Fe-Cr alloys because the coefficient of thermal expansion of Al was higher than that of Fe and Cr.

• 대한금속재료학회지
• /
• 제47권6호
• /
• pp.331-337
• /
• 2009

To lower the annealing temperature and the deviation of the mechanical properties of bake hardening steels, high purity steels were investigated. The steels were characterized by treating at low recrystallization temperature. It was confirmed that the strengthening originated from the solid solution of carbon and the ferrite grain refinement by fine MnS precipitates as carbon and sulfur contents increased in high purity steels. However, it was observed that there was no more increase of strength in steels containing over 40 ppm of carbon. It was considered that the excess carbon formed either the carbon cluster or the low temperature unstable carbides which had the negligible effect on the strengthening because they were reported to be highly coherent with the matrix. The carbon cluster and unstable carbides could be transformed to the stable cementite during bake hardening treatment. MnS was not observed in the high purity steel containing 5 ppm S, resulting in very coarse recrystallized grains and good ductility. As sulfur content increased, the recrystallized grain size decreased due to the formation of the fine MnS precipitates.

• 한국추진공학회지
• /
• 제19권3호
• /
• pp.96-102
• /
• 2015

기존에 사용되고 있는 대부분의 추진물질들은 연소 시 이산화탄소, 염산가스 등의 환경유해 물질을 다량 발생시킨다. 본 연구에서는 이러한 문제점을 개선하기 위한 테트라진 계열의 저탄소 고질소 화합물인 DAAT의 합성공정을 확립하였다. 또한, 문헌에 빠져있는 구체적인 공정법 및 특성 분석 결과를 서술하였다. 그리고 분광분석(NMR, IR)을 통한 DAAT의 구조분석과 열, 충격, 마찰 안정성을 측정하였고, Gaussian 09와 EXPLO5를 이용하여 생성열과 폭발 특성(폭압, 폭속) 등을 계산하였다.

• 열처리공학회지
• /
• 제36권3호
• /
• pp.145-152
• /
• 2023

β titanium alloys containing β stabilizing elements such as V, Nb, Ta, Mo and Fe are widely used etc, due to their excellent specific strength, corrosion resistance, fatigue strength and easy formability. New metastable β titanium alloys are developed containing low-cost elements (Mo and Fe) in this study. Fe element is a strong β-stabilizer which can affect the mechanical and electrochemical properties of Ti-5Mo-xFe (x = 1, 4 wt%) alloys. These properties were analyzed in connection with microstructure and phase distribution. Ti-5Mo-4Fe alloy showed higher compression yield stress and maximum stress than Ti-5Mo-1Fe alloy due to solid-solution hardening and grain refinement hardening effect. As Fe element increased, Fe oxide formation and reduction of ${\bar{Bo}}$ (bond order) value affect the decrease of corrosion resistance. Ti-5Mo-xFe alloys were more excellent than Ti-6Al-4V ELI alloy.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.842-848
• /
• 2013

Developments of Solid-State Gyroscopy during last decades are impressive and were based on thin-walled shell resonators like HRG or CRG made from fused quartz or leuko-sapphire. However, a number of design choices for inertial-grade gyroscopes, which can be used for high-g applications and for mass- or middle-scale production, is still very limited. So, considerations of fundamental physical effects in solids that can be used for development of a miniature, completely solid-state, and lower-cost sensor look urgent. There is a variety of different types of bulk acoustic (elastic) waves (BAW) in anisotropic solids. Shear waves with different variants of their polarization have to be studied especially carefully, because shear sounds in glasses and crystals are sensitive to a turn of the solid as a whole, and, so, they can be used for development of gyroscopic sensors. For an isotropic medium (for a glass or a fine polycrystalline body), classic Lame's theorem (so-called, a general solution of Elasticity Theory or Green-Lame's representation) has been modified for enough general case: an elastic medium rotated about an arbitrary set of axes. Travelling, standing, and mixed shear waves propagating in an infinite isotopic medium (or between a pair of parallel reflecting surfaces) have been considered too. An analogy with classic Foucault's pendulum has been underlined for the effect of a turn of a polarizational plane (i.e., an integration effect for an input angular rate) due to a medium's turn about the axis of the wave propagation. These cases demonstrate a whole-angle regime of gyroscopic operation. Single-crystals are anisotropic media, and, therefore, to reflect influence of the crystal's rotation, classic Christoffel-Green's tensors have been modified. Cases of acoustic axes corresponding to equal velocities for a pair of the pure-transverse (shear) waves have of an evident applied interest. For such a special direction in a crystal, different polarizations of waves are possible, and the gyroscopic effect of "polarizational precession" can be observed like for a glass. Naturally, formation of a wave pattern in a massive elastic body is much more complex due to reflections from its boundaries. Some of these complexities can be eliminated. However, a non-homogeneity has a fundamental nature for any amorphous medium due to its thermodynamically-unstable micro-structure, having fluctuations of the rapidly-frozen liquid. For single-crystalline structures, blockness (walls of dislocations) plays a similar role. Physical nature and kinematic particularities of several typical "drifts" in polarizational BAW gyros (P-BAW) have been considered briefly too. They include irregular precessions ("polarizational beats") due to: non-homogeneity of mass density and elastic moduli, dissymmetry of intrinsic losses, and an angular mismatch between propagation and acoustic axes.

• 한국세라믹학회지
• /
• 제40권6호
• /
• pp.560-565
• /
• 2003

방전 플라즈마 소결법(SPS: Spark Plasma Sintering)을 이용하여 800~100$0^{\circ}C$의 낮은 소결 온도에서 완전 치밀화를 이루는 M-doped ZnO를 (M=Al, Ni) 제조하여 그 소결 특성과 미세구조를 분석하였다. 전자현미경 분석 결과, NiO의 첨가는 ZnO 결정격자와의 고용체 형성을 촉진시키고 결정립 성장을 유발하였고, A1$_2$O$_3$는 순수한 ZnO 소결 시 나타나는 입계에서의 증발현상을 제어하고, 이차상 형성을 통하여 결정립 성장을 억제함을 확인할 수 있었다 NiO와 $Al_2$O$_3$를 동시에 첨가한 시편이 가장 우수한 미세구조가 형성됨을 확인하였고, SEM-EBSP (Electron Back-scattered Diffraction Pattern) 분석 결과 또한 우수한 결정립계 분포를 가지고 있음을 확인하였다. 이러한, 소결체의 우수한 미세구조적 특징은 carrier 농도 증가에 따른 전기 전도도와 증가 및 phonon scattering 효과에 의한 열전도도의 감소 효과를 유발하여 ZnO의 열전 특성을 향상시키리라 사료된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.393-397
• /
• 2001

The innovatory process, that is the direct separation and recovery of the iron and zinc metals contained in the high temperature exhaust gas generated from the electric arc furnace fer the inn scrap melting and/or the dust treatment, has been proposed. This proposed process consists of the moving coke bed filter that is directly connected to the electric furnace, and the following heavy metal condenser. The exhaust gas passes through the filter and the condenser right after exhausting from the electric furnace. The moving coke bed filter is being controlled at about 1000℃ and collects iron and slag components contained in the high temperature exhaust gas. Heavy metals such as zinc and lead pass through the filter as vapor. Based on the thermodynamic considerations, the iron oxide and the zinc oxide are reduced in the filter. The solution loss reaction rate is comparatively low at about 1000℃ in the coke bed filter by the analysis using the mathematical simulation model. The heavy metal condenser is installed in the position after the coke bed filter, and rapidly cools the gas from about 1000℃ to 450℃ by a full of the cooling medium like the solid ceramic ball in addition to the cooling from the wall. The zinc and lead vapor condense and separate f개m the gas in a liquid state. The investigation of the characteristics of the exhaust gas of the commercial electric arc furnace, the fundamental experiments of the laboratory scale and the bench scale ensured the formation of this proposed process. A small-scale pilot plant examination is carrying out at present to confirm the formation of the process. It is certain that the dust generation of the electric arc furnace is extremely decreased, and it can save the energy consumption of usual dust treatment processes by the realization of this process.