• 한국자원식물학회지
• /
• 제18권3호
• /
• pp.456-461
• /
• 2005

블랙베리의 다경유도를 통한 식물체 재생을 위하여, 노지에서 생육되고 있는 맹아를 채취하여 $1.2\%$ NaOCl 용액에 침지하여 표면 살균한 후, kinetin과 BA가 각각 포함된 MS 배지에서 4주간 배양하여 절편당 형성된 신초의 수를 조사하여 BA가 효과적임을 밝혔다. 동일방식으로 맹아를 IBA와 BA를 첨가한 MS 고체배지에서 4주간 배양하여 신초를 유도하였는데 1.0 mg/L BA가 첨가된 배지에서 신초유도는 $100\%$ 이루어졌다. 기내배양한 신초의 절편체를 1.0 mg/L BA가 첨가된 MS 배지에 치상하여 형성된 신초의 수는 절편체당 5.3개로 최고를 나타내었다. 약 10주 정도 배양을 더 오래하였을 때, 다경 형성율이 더 높아질 뿐 아니라 절편체당 신초 수도 많아졌다. 형성된 신초로부터 뿌리 발생을 위하여 glycine의 농도를 달리한 $(0\~2.0\;mg/L)$ MS 기본배지에서 4주간 배양하였을 때, 0.5 mg/L glycine을 첨가한 배지에서 고빈도 $(85\%)$의 뿌리발생을 관찰 할 수 있었다. 재생된 식물체는 모래 : 토양 : 버뮤큘라이트 (1:1:1, vol.) 혼합토양에서 순화시켜, 토양에 이식하였을 때 $95\%$의 식물체 생존율을 나타내었다.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2006년도 춘계임시총회 및 제27회 학술발표대회
• /
• pp.78-85
• /
• 2006

In textile industries, waste effluent containing zinc is generated during the manufacture of rayon yarn from the wood pulp or cotton linters. Due to the strict environmental regulations and the presence of toxic metallic and other constituents, the discharge of industrial effluents in the sewage or disposal of solid sludge as landfill is restricted. Before recycling of zinc as zinc sulphate solution to the spinning-bath of the rayon manufacturing plant the zinc sulphate solution must be free from calcium, which is deleterious to the process as gypsum precipitates with the increase in concentration and forms scale in the bath. In the present work an attempt has been made to develop a process following solvent extraction technique using thiophosphinic extractants, Cyanex 272 and 302 modified with isodecanol and diluted in kerosene to recover zinc from rayon effluent. Various process parameters viz. extraction of zinc from different concentration of solution, distribution ratio, selective extraction, O/A ratio on extraction and stripping from the loaded organic, complex formation in the organic phase etc. have been studied to see the feasibility of the process. The extractant Cyanex 302 has been found selective for the recovery of 99.99% of zinc from the effluent above equilibrium pH 3.4 maintaining the O/A ratio of 1/30 leaving all the calcium in the raffinate. It selectively extracted zinc in the form of complex $[R_{2}Zn.3RH]_{org}$ and retained all the calcium in the aqueous raffinate. The zinc from the loaded Cyanex 302 can be stripped with 10% sulphuric acid at even O/A ratio of 10 without affecting the stripping efficiency. The stripped solution thus obtained could be recycled in the spinning bath of the rayon plant. The raffinate obtained after the recovery of zinc could be disposed safely without affacting environment.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1990년도 제2차 학술발표초록집
• /
• pp.36-37
• /
• 1990

In the past, facile dissolution of cellulose has been hampered by the lack of suitable nondegrading solvents. Recently, this problem has been solved in our laboratory by the discovery of an inexpensive, convenient solvent system, that is the mixture of $NH_3\;and\;NH_4SCN$, for cellulose. Also, the $cellulose/NH_3/NH_4SCN$ solution system has been found to form the anisotropic, i.e., liquid crystalline phase. It is believed that both the cholesterio and the nematic phase occur. This finding has prompted extensive on-going researoh on the formation of the liquid crystalline phase from an inexpensive natural source such as cellulose since the nematic phase is envisioned as an excellent precursor sources for products with desirable properties, for example, high modulus and high strength. This interest naturally leads to a desire to understand the theological properties of the nematic phase so that the transformation of the nematic phase to the solid state with desirable properties can be efficiently accomplished, ;From this point of view, the theological behavior of the $cellulose/NH3_/NH_4SCN$ system has been studied as a function of shear rate and shear stress over a wide range of solvent compositions, cellulose concentration, centrifugation and urea contents, Results indicate that the viscosity decreases with increasing shear rate. A marked shear thinning behavior and a quasi-Newtonian behavior were observed in the low shear rate region and in the high shear rate region, respectively for all solvent compositions. The $cellulose/NH_3/NH_4SCN$ solution system only exhibited the viscosity increase with increasing cellulose concentration and failed to show the viscosity drop generally observed at the point of incipience of liquid crystal formation, This may be due to the gel-like nature of the solution by the association of the rodlike molecules into bundles which may serve as crosslinking points giving the cellulose solution a network structure. Also, simply hydrogen bonding may be so restrictive of molecular mobility that a viscosity drop is blocked. In addition to the above results, yield stress and thixotropy were also observed in the $cellulose/NH_3/NB_4SCN$ solution system which are characteristics of liquid crystal and gel, The results of the effect of centrifugation on viscosity show that viscosity decreases by the application of centrifugation. This may be explained by the change of the piled polydomain structure to the dispersed polydomain structure due to the pressure gradient generated during centrifugation.ation.

• 청정기술
• /
• 제20권2호
• /
• pp.146-153
• /
• 2014

본 연구에서는 입체장애 알카놀아민 첨가제인 2-아미노-2-메틸-1-프로판올(2-amino-2-methyl-1-propanol, AMP)과 2-아미노-2-메틸-1,3-프로판디올(amino-2-methyl-1,3-propanediol, AMPD)가 $K_2CO_3$ 흡수액의 이산화탄소 흡수속도와 $KHCO_3$ 고체염의 석출에 미치는 영향에 대해 고찰하였다. 흡수온도 $40^{\circ}C$와 $60^{\circ}C$에서 wetted-wall column을 이용하여 흡수속도와 이산화탄소 평형분압을 측정한 결과, 30 wt%의 고농도 $K_2CO_3$에 대해 5 wt% AMP와 AMPD는 흡수속도를 증가시키는 동시에 평형분압을 감소시켜, 흡수촉진제로서 흡수성능을 향상시키는 것으로 확인되었다. 또한, 회분식 냉각결정화 실험 결과, 복수의 히드록실기를 포함하는 AMPD가 흡수액을 냉각시 석출되는 $KHCO_3$ 고체염의 양을 증가시키는 것으로 나타났다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제7권
• /
• pp.1-10
• /
• 1999

In this study, a numerical analysis is made on the ice-formation for laminar water flow inside a stenotic tube. The study takes into account the interaction between the laminar flow and the stenotic port in the circular tube. The purpose of the present numerical investigation is to assess the effect of a stenotic shape on the instantaneous shape of the flow passage during freezing upstream/downstream of the stenotic channel. In the solution strategy, the present study is substantially distinguished from the existing works in that the complete set of governing equations in both the solid and liquid regions are resolved. In a channel flow between parallel plates, the agreement between the of predictions and the available experimental data is very good. Numerical analyses are performed for parametric variations of the position and heights of stenotic shape and flow rate. The results show that the stenotic shape has the great effect on the thickness of the solidification layer inside the tube. As the height of a stenosis grows and the length of a stenosis decreases, the ice layer thickness near the stenotic port is thinner, due to backward flow caused by the sudden expansion of a water tunnel. It is found that the flow passage has a slight uniform taper up to the stenotic channel, at which a sudden expansion is observed. It is also shown that the ice layer becomes more fat in accordance with its Reynolds number.

• 한국세라믹학회지
• /
• 제12권1호
• /
• pp.29-36
• /
• 1975

This study was conducted to research the formation, color development and application for colored glazes of the spinel solid solutions of the green pigment. On specimens prepared by calcining the oxide and basic carbonate mixture at 1250℃ for 1.5 hour, the x-ray analysis, measurement of reflectance and the test of their stabiality as a glaze pigment were carried out. The results are summarized as follows 1) Each sample is composed of single spinel and not of mixture of spinel. 2) Formation of continuous soild solution, except for a few instances, pertaining to Vegard's law was confirmed by means of the x-ray analysis. 3) The more difference between absorption and reflectance lies, the lighter colors are. When the absorption occurs at the high-reflectance, the excitation purity becomes low. On the contrary when the absorption takes place at the low-reflectance, the excitation purity becomes low. On the contrary when the absorption takes place at the low-reflectance, the excitation purity is higher. 4) Colors obtained in the CdO-MgO-Cr2O3-Al2O3 system, as the amounts of Al3+ increased, change from green through brown to pink, and the absorption peak shifts towards violet region. 5) An increase in Co2+ in the CoO-MgO-Cr2O3-Al2O3 system, changes the color from blue green to dark blue. The excitation purity is higher, and the absorption peak shifts toward regions. 6) Colors are green in the NiO-MgO-Cr2O3 and CdO-MgO-Cr2O3 systems in general, but in the ZnO-MgO-Cr2O3 system brillant hue is not obtained. 70 According to the results of the colored glaze test, the spinels turn outto be stable as brilliant glaze pigment in the calcium-magnesia glaze.

• Journal of Plant Biotechnology
• /
• 제49권4호
• /
• pp.331-338
• /
• 2022

Sunflower (Helianthus annuus L.) protoplasts were isolated from seven-day-old etiolated hypocotyls of 10 A line and four-week-old fully expanded young leaves of PI 441983 line in vitro seedlings using an enzymatic method. Purified protoplasts were collected by filtration and floatation in sucrose solution. Semi-solid protoplast culture was performed using the L4 regeneration protocol with various culture media and plating densities to achieve the highest efficiencies for protoplast culture of hypocotyl and mesophyll protoplasts of 10 A and PI 441983 lines, respectively. The concentrations in liquid L'4M medium and different plating densities were evaluated in two types of cytokinins, the adenine-type 6-benzyladenine (BA) and the phenylurea-type thidiazuron (TDZ). The highest colony formation was achieved in both sunflower lines when 0.5 mgL^-1 BA and 0.5 mgL^-1 TDZ were applied with a high plating density (3 × 10⁵ protoplasts mL^-1). These conditions led to 38.45% and 39.40% colony formation for hypocotyl protoplasts of the 10 A line and mesophyll protoplasts of the PI 441983 line, respectively. Moreover, many hypocotyl protoplast-derived colonies developed into micro-calli. In addition, superior development of both sunflower protoplasts was observed with all plating densities when BA was used in combination with TDZ. This finding will be applicable to future sunflower hybrid production via somatic hybridization.

• The Plant Pathology Journal
• /
• 제39권1호
• /
• pp.123-135
• /
• 2023

Previously, Pseudomonas plecoglossicida YJR13 and Pseudomonas putida YJR92 from a sequential screening procedure were proven to effectively control Phytophthora blight caused by Phytophthora capsici. In this study, we further investigated the anti-oomycete activities of these strains against mycelial growth, zoospore germination, and germ tube elongation of P. capsici. We also investigated root colonization ability of the bacterial strains in square dishes, including cell motility (swimming and swarming motilities) and biofilm formation. Both strains significantly inhibited mycelial growth in liquid and solid V8 juice media and M9 minimal media, zoospore germination, and germ tube elongation compared with Bacillus vallismortis EXTN-1 (positive biocontrol strain), Sphingomonas aquatilis KU408 (negative biocontrol strain), and MgSO₄ solution (untreated control). In diluted (nutrient-deficient) V₈ juice broth, the tested strain populations were maintained at >10⁸ cells/ml, simultaneously providing mycelial inhibitory activity. Additionally, these strains colonized pepper roots at a 10⁶ cells/ml concentration for 7 days. The root colonization of the strains was supported by strong swimming and swarming activities, biofilm formation, and chemotactic activity towards exudate components (amino acids, organic acids, and sugars) of pepper roots. Collectively, these results suggest that strains YJR13 and YJR92 can effectively suppress Phytophthora blight of pepper through direct anti-oomycete activities against mycelial growth, zoospore germination and germ tube elongation. Bacterial colonization of pepper roots may be mediated by cell motility and biofilm formation together with chemotaxis to root exudates.

• 공업화학
• /
• 제9권2호
• /
• pp.165-171
• /
• 1998

$Y_2O_3$(99.9%)와 $BaCO_3$(99.9%) 및 CuO(99.9%)를 사용하여 $Y_1Ba_2Cu_3O_{7-x}$(123) 분말을 발화합성법에 의해 제조하였다. 발화전 용액을 여러 가지 pH로 변화시켜 제조하였으며, 이 분말을 성형하여 열처리 온도와 시간 변화에 따른 상형성과 반응특성을 조사하였다. 시료의 조성과 조직의 특성은 ICP와 SEM을 이용하여 측정하였고, Y-Ba-Cu-O계의 상형성과 전화율을 결정하기 위해 X선 회절분석을 하였다. 발화합성법을 이용하여 pH 7(${\pm}0.3$)에서 제조된 123 분말이 순도와 균일성 및 반응특성에서 가장 좋은 결과를 보였다. pH 7(${\pm}0.3$)에서 제조된 분말을 이용한 123 상생성에 따른 활성화에너지(${\Delta}E_a$)는 191kJ/mol으로서 고상반응법의 230kJ/mol에 약 13% 정도 더 낮았다.

• 한국해양학회지
• /
• 제28권3호
• /
• pp.229-240
• /
• 1993

조간대 퇴적물 내에서 황화물의 형성과 그 행동을 고찰하기 위해 황해 경기만에 위치한 반월조간 대에서 1990년부터 1992년에 걸쳐 총 7번의 주상시료를 채취하여, 황 상염, 암모늄, 인산염, 황화수소, 철이온 등의 공극수 용존성분과 AVS, 원소황, pyrite sulfur 등의 퇴적물 내 황화물을 분석하였다. 공극수에서 황화수소, 암모늄, 인산염 등의 농도가 활발한 황산염환원의 결과로 이인해 깊이에 따라 증가하는 경향이 나타났다. 한편 철이온의 농도는 표 아래에서 급격히 감소했는데, 황화수소의 농도를 고려할 때 이는 황화물의 형성을 지시하는 것으로 생각된다. 퇴적물 내의 황화물을 분 석한 결과 총황화물의 양은 최고 7.9 mg/g 이었다. 황화물 중 가장 우세한 형태는 AVS 로 언제나 전체 황화물의 50%를 넘었으며, 가장 안정한 형태의 황화물로 알려진 pyrite sulfur가 element sulfuur보다 약간 많았다. 이 지역에서 퇴적물 내 황화물 중 ASV는 언제나 활발하게 만들 어지지만, ASV와 element sulfur의 반응으로 형성되는 pyrite sulfur 는 그 형성이 제한되기 때문으로 생각된다. 그리고 가장 중요한 제한 요소는 element sulfur의 양으로 생각된다.