• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.206.2-206.2
• /
• 2014

Recently, particle induced X-ray emission (PIXE) analysis system was installed at the 2MV ion acceleration system in Korea institute science and technology (KIST). This installation is for complement to low atomic resolution of heavy atoms at Rutherford backscattering spectrometry (RBS) system. For quantitative analysis, a mass calibration of the PIXE set-up has been done with thin film standards and. The GUPIX software package has been used to process the PIXE spectra and the results are compared with the values from RBS system. Therefore, the instrumental constant H (solid angle and correction factor) is determined relying completely on the GUPIX data base (cross-sections, fluorescence and Coster-Kronig probabilities, stopping powers and attenuation coefficients) for a large set of elements. These H values can be used in future analysis.

• 대한세포병리학회지
• /
• 제2권2호
• /
• pp.98-104
• /
• 1991

We present the cytologic features of small ceil neuroendocrine carcinoma of the liver metastasized from the uterine cervix. Cytologically, tumor cells were arranged in a pattern of solid sheet in necrotic background. The tumor cells were characterized by uniform, small cells, round hyperchromatic nuclei, and high nuclear cytoplasmic ratio. The smears showed frequent mitotic figures and rosette formation. These findings were identified with the previous histologic sections of uterine cervix. To make a diagnosis of metastatic small ceil neuroendocrine carcinoma on the Papanicolaou smear, a high index of suspicion and careful review of clinical history are needed.

• Structural Engineering and Mechanics
• /
• 제21권3호
• /
• pp.295-313
• /
• 2005

This paper evaluates the effective width of composite steel beams with precast hollowcore slabs numerically using the finite element method. A parametric study, carried out on 27 beams with different steel cross sections, hollowcore unit depths and spans, is presented. The effective width of the slab is predicted for both the elastic and plastic ranges. 8-node three-dimensional solid elements are used to model the composite beam components. The material non-linearity of all the components is taken into consideration. The non-linear load-slip characteristics of the headed shear stud connectors are included in the analysis. The moment-deflection behaviour of the composite beams, the ultimate moment capacity and the modes of failure are also presented. Finally, the ultimate moment capacity of the beams evaluated using the present FE analysis was compared with the results calculated using the rigid - plastic method.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 제14회 정기총회 및 03년 동계학술발표회
• /
• pp.220-221
• /
• 2003

Intracavity second harmonic generation of diode pumped solid state lasers in the visible and ultraviolet regions provide efficient, compact and robust light sources for various applications, such as optical data storage, material processing, spectroscopy and bioanalysis. Advantages of neodymium vanadate (Nd：$YVO_4$) as a gain medium for intracavity-doubled lasers over Nd：YAG lie in the facts that the gain spectrum consists of a single line with short absorption depth, and that the stimulated emission cross sections are larger. (omitted)

• 소성∙가공
• /
• 제12권6호
• /
• pp.558-565
• /
• 2003

Rotary swaging is one of the incremental forming process which is a chipless metal forming process for the reduction of cross-sections of bars, tubes and wires. In the present work, the rotary swaging machine and dies were designed to investigate the formability of TDS(Tube Drive Shaft) used in automotive industry. The process variables such as the speed of forming, the shape of the formed materials and the reduction of area were also estimated to study experimental analyses of rotary swaging process using the materials of 34Mn5 and S45C. From experimental results, it was found that the process variables affected the quality of TDS in terms of hardness, the precision of products and the surface roughness. The hardness after swaging approved to be Increased with the increase in the reduction of diameter. And it was found that the grain size became smaller and the elongated grains were formed in the axis direction.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.255-262
• /
• 2003

In present Korea Highway Bridge Standards the lap splice of longitudinal bars in a potential plastic hinge region is allowed so that large amount of transverse rebar specified in high seismicity regions Is required to prevent brittle bond failure If the brittle failure effects can be completely removed from the conventional designed piers, the amount of transverse rebar will be reduced drastically. In this study scaled models with solid and hollow rectangular sections were tested to investigate the seismic behavior of RC piers with 50％ of lap-spliced longitudinal bars in plastic hinge regions. In the tests the typical flexural failure conducting a ductile behavior were observed in both models. It is shown that the 50％ of lap-spliced bars can be considered as a good alternative of seismic detailing for longitudinal bars.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권2호
• /
• pp.263-271
• /
• 2010

This trial was conducted to determine the effects of feeding a diet containing solid-state fermented rapeseed meal on performance, nutrient digestibility, intestinal ecology and intestinal morphology of broiler chickens. A mixed liquid culture, containing approximately 5 log cfu/ml Lactobacillus fermentum, Enterococcus faecium, Saccharomyces cerevisae and Bacillus subtilis was prepared in a 1:1:1:1 ratio. A basal substrate (BS) containing 75% rapeseed, 24% wheat bran and 1% brown sugar was mixed with the liquid culture in a ratio of 10:3. Over the 30-day fermentation, isothiocyanates were reduced from 119.6 to 14.7 mmol/kg. A total of 168, day-old male Arbor Acres broiler chicks were assigned to one of three dietary treatments including a corn-soybean meal based control diet as well as two experimental diets in which the control diet was supplemented with 10% of the BS containing unfermented rapeseed meal or 10% of the BS containing rapeseed meal subjected to solid state fermentation. There were 8 pens per treatment and 7 birds per pen. From days 19-21 and days 40-42, uncontaminated excreta were collected from each pen for digestibility determinations. In addition, digesta from the colon and ceca were collected to determine the number of lactobacilli, enterobacteria and total aerobes. The middle sections of the duodenum, jejunum, and ileum were collected for intestinal morphology. Over the entire experimental period (d 1-42), the weight gain and feed conversion of birds fed fermented rapeseed meal were superior (p<0.05) to that of birds fed nonfermented rapeseed meal and did not differ from the soybean control. On day 42, birds fed fermented rapeseed meal had higher (p<0.05) total tract apparent digestibility coefficients for dry matter, energy, and calcium than birds fed non-fermented rapeseed meal. Colon and ceca digesta from broilers fed the fermented feed had higher (p<0.05) lactobacilli counts than birds fed the control and non-fermented rapeseed meal diets on day 21 and 42. Fermentation also improved (p<0.05) villus height and the villus height:crypt depth ratio in the ileum and jejunum on day 21 and 42. The results indicate that solid-state fermentation of rapeseed meal enhanced performance and improved the intestinal morphology of broilers and may allow greater quantities of rapeseed meal to be fed to broilers potentially reducing the cost of broiler production.

• 대한영양사협회학술지
• /
• 제24권1호
• /
• pp.1-18
• /
• 2018

Sustainable practices of school foodservices are gaining more attentions. The study aimed to investigate dietitians' performance levels of sustainable practices in school foodservice settings in Gyeonggi Provinces. Using a survey method was used, and data were collected from 358 participants (response rate 59.7%) to be analyzed using the SPSS program. The evaluation tool for sustainable practices of school foodservices consisted of four sections and 34 criteria with 100 points. Employment status of the respondents was as follows: nutrition teachers 40.9%, dietitians (permanent) 45.1%, and temporary position dietitians 13.2%. Dietitians' performance for sustainable practices marked 65.67 points out of 100 (performance rate 66%) and were in the following order by section: sustainable foodservice management criteria (69%), support activities (69%), planning and evaluation (68%), and outcome management (52%). Regarding sub-sections, criteria that acquired higher performance rates were labelling of food origin (99%), use of seasonal vegetables and fruits (98%), food waste management by contract dealer (98%), and planning for reducing of food waste and solid waste (91%). Meanwhile, criteria that showed the lowest scores were installing water conservation devices on equipment (19%), operating food donation programs for communities (21%), use of sensor lights for electricity conservation (24%), planning for annual energy conservation (40%), and implementation of education programs for foodservice workers on sustainable activities (42%). Performance scores differed according to school levels and working experience of dietitians, indicating that dietitians at elementary school foodservices or with work experience of 15 to 20 years showed higher performance than those at high schools or with less than 5 years of work experience (P<0.001, P<0.05). Based on the results, action plans for improvement were suggested.

• Applied Microscopy
• /
• 제30권4호
• /
• pp.357-365
• /
• 2000

포유류 장생 상피세포의 하나인 파네스세포(Paneth cell)는 여러 가지 금속류를 함유하고 있으며, 생체가 과잉의 이들 금속류에 노출되거나 부족할 때에 장 내강을 통해 제거하거나 흡수함으로써 금속류의 항상성에 기여한다고 알려져 있다. 이번 연구는 이러한 연구보고에 근거하여 금속류중에서 zinc를 실험적으로 과량투여한 후 파네스세포내 zinc의 분포에 어떤 변화가 초래되는 지를 광학 및 전자현미경적 autometallography(AMG)로 관찰함으로써 파네스세포의 zinc와 관련된 세포생물학적 기능을 규명하고자 하였다. Wistar 랫드에 체중 당 20mg의 zinc chloride를 생리식염수 5ml에 녹여 복강주사한 후 2시간에 이르러 0.1 M phosphate buffer(PB)에 녹인 0.5% sodium sulphide-3% glutaraldehyde 흔합액으로 관류고정하였다. 회장(ileum)의 일부를 Dry Ice나 $CO_2$ gas로 얼린 후 cryostat을 이용하여 $20{\mu}m$ 두께의 조직절편을 만들어 및 단계의 AMG법을 시행하였다. 이와는 별도로 EM용으로 선택된 회장절편은 일련의 전자현미경 표본제작과정을 거쳐, 100nm두께의 thin section을 만들어 uranyl-lead 이중염 색 추 전자현미경으로 관찰하였다. Zinc를 투여한 동물에서 관찰된 소견은 생리식염수만을 투여한 대조군의 것과 비교할 때 큰 차이를 보였다. 우선 대조군에서는 파네스세포의 꼭대기(apex)부위에서 낱알모양을 띤 AMG양성반응 구조물(AMG grain)들이 분비과립과 사이토졸(cytosol)에서 관찰되었고, 세포사이공간에서도 적은 양의 grain이 분포하고 있었다. 반면 zinc를 투여한 랫드의 파네스세포에서는 AMG 입자가 이상의 부위에서 훨씬 많은 양의 grain이 분포해 있었으며, 특히 분비과립에서는 가장 높은 농도로 관찰되었다. 더욱이 대조군에서 관찰되지 많았던 장샘의 분비관(Lieberkuhn crypt)및 고유판 혈관의 내에서도 많은 grain이 관찰되었다. 이상의 결과를 요약하면 과량의 zinc에 노출된 생체는 혈관을 경유하여, 파네스세포의 분비과립을 매개로 하여, 장관의 내강쪽으로 과잉의 zinc 를 피내고 있는 모습을 보인다. 따라서 연구자는 파네스세포가 생체내 zinc의 양을 조절하는데 중요한 역할이 있을 것으로 본다.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권2호
• /
• pp.206-222
• /
• 2015

This work uses different finite element approaches to the free vibration analysis of reinforced shell structures, and a simplified model of a typical launcher with two boosters is used as an example. The results obtained using a refined one-dimensional (1D) beam model are compared to those obtained with commercial finite element software. The 1D models that are used in the present work are based on the Carrera Unified Formulation (CUF), which assumes a variable kinematic displacement field over the cross-sections of the beam. Two different sets of polynomials that correspond to Taylor (TE) or Lagrange (LE) expansions were used. The analyses focused on three reinforced structures: a stiffened panel, a reinforced cylinder and the complete structure of the launcher. The frequencies and natural modes obtained using one-dimensional models are compared to those obtained from classical finite element analysis. The classical FE models were built using a beam-shell or solid elements, and the results indicate that the refined beam models can in fact be used to investigate the behavior of very complex reinforced structures. These models can predict the shell-like modes that are typical of thin-walled structures that cannot be detected using classical beam models. The refined 1D models used in the present work provide results that are as accurate as those from solid FE models, but the 1D models have a much lower computational cost.