• BMB Reports
• /
• 제38권5호
• /
• pp.517-525
• /
• 2005

Solid phase peptide synthesis method, which was introduced by Merrifield in 1963, has spawned the concept of combinatorial chemistry. In this review, we summarize the present technologies of solid phase peptide synthesis (SPPS) that are related to combinatorial chemistry. The conventional methods of peptide library synthesis on polymer support are parallel synthesis, split and mix synthesis and reagent mixture synthesis. Combining surface chemistry with the recent technology of microelectronic semiconductor fabrication system, the peptide microarray synthesis methods on a planar solid support are developed, which leads to spatially addressable peptide library. There are two kinds of peptide microarray synthesis methodologies: pre-synthesized peptide immobilization onto a glass or membrane substrate and in situ peptide synthesis by a photolithography or the SPOT method. This review also discusses the application of peptide libraries for high-throughput bioassays, for example, peptide ligand screening for antibody or cell signaling, enzyme substrate and inhibitor screening as well as other applications.

• 핵의학기술
• /
• 제12권3호
• /
• pp.181-183
• /
• 2008

We developed simple and highly efficient synthesis method for [$^{11}C$]methionine using solid-phase extraction method. For synthesis, we used C18 cartridge. [$^{11}C$]methionine was synthesized on C18 cartridge according to the solid-phase [$^{11}C$]methylation of precursor L-homocysteine thiolactone hydrochloride. The radiochemical yields of [$^{11}C$]methionine was $48.9{\pm}7.93%$ decay corrected (results of 30 syntheses, mean$\pm$SD), with average production higher than 180 mCi. This procedure showed high yield and simple synthesis of [$^{11}C$]methionine.

• 한국환경과학회지
• /
• 제12권1호
• /
• pp.81-86
• /
• 2003

The study was carried out to evaluate the new analytical method of phthalate esters(diethylphthalate, di-n-butylphthalate, butylbenzylphthalate, bis(2-ethylhexyl)phthalate), one of the endocrine disruptors, which were performed by GC/MS-SIM(selected ion monitoring). The phthalate esters were extracted from water samples using solid-phase extraction on $C_{18}$ columns. It investigated that the extraction recovery rate of phthalate esters with different solvents and solvent volume. The optimal solvent was dichloromethane and proper volume of dichloromethane for recovery of phthalate esters was 4 mL. There were good linearities(above $R^2$=0.9975) in the range 0.01~0.50mg/L, and the detection limits were below 0.01~0.03$\mu\textrm{g}$/L. The recovery rates, RSD and MDLs for phthalate esters were 80~114%, 5.0~8.1% and 0.03~0.11$\mu\textrm{g}$/L, respectively. This method shows a good precision of phthalate esters.

• 한국동물위생학회지
• /
• 제19권2호
• /
• pp.163-171
• /
• 1996

This study was carried out to determination of carbadox and olaquindox residues in swine tissues by MSPD(matrix solid phase disperse)method. The results obtained were as follows ; 1. Optimal wavelengths of UV for carbadox and olaquindox were 310 and 370nm, respectively 2. Ethyl acetate-Acetonitrile(8:2) was found to be adequate as extractant in this method. 3. The average overall recovery of carbadox at the 0.01, 0.05, and 1.0PPM spike levels was 89. 2% and that of olaquindox was 89.9%, and the detection limits were 0.5ng for carbadox and olaquindox.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권2호
• /
• pp.141-149
• /
• 1997

L $a_{0.7}$S $r_{0.3}$Mn $O_{3}$ powders were prepared by both GNP(Glycine-Nitrate Process) and solid state reaction method in various of calcination temperature(800-1000.deg. C) and time in air. Also, L $a_{0.7}$S $r_{0.3}$Mn $O_{3}$ cathode contacts on YSZ(Yttria-Stabilized Zirconia) substrate were prepared by screen printing and sintering method as a function of sintering temperature(1100-1450.deg. C) in air. Sintering behaviors have been investigated by SEM(Scanning Electron Microscope) and porosity measurement. Compositional and structural characterization were carried out by X-ray diffractometer and ICP AES(Inductively Coupled Plasma-Atomic Emission Spectrometry) analysis. Electrical characterization was carried out by the electrical conductivity with linear 4 point probe method. As the calcination period increased in solid state reaction method, L $a_{0.7}$S $r_{0.3}$Mn $O_{3}$ phase increased. Although L $a_{0.7}$S $r_{0.3}$Mn $O_{3}$ single phase was obtained only for 48hrs at 1000.deg. C, in GNP method it was easy to get single and ultra-fine L $a_{0.7}$S $r_{0.3}$Mn $O_{3}$ powders with submicron particle size at 650.deg. C for 30min. The particle size and thickness of L $a_{0.7}$S $r_{0.3}$Mn $O_{3}$ cathode contact by solid state reaction method did not change during the heat treatment, while those by GNP method showed good sintering characteristics because initial powder size fabricated from GNP method is smaller than that fabricated from solid state reaction method. Based on enthalpy change from thermodynamic data and ICP-AES analysis, it was suggested to make cathode contact in composition of (L $a_{0.7}$S $r_{0.3}$)$_{0.91}$ Mn $O_{3}$ which have little second phase (L $a_{2}$Z $r_{2}$ $O_{7}$) for high efficient solid oxide fuel cells applications. As (L $a_{0.7}$S $r_{0.3}$)$_{0.91}$Mn $O_{3}$ cathode contact on YSZ substrate was sintering at 1250.deg. C the temperature that liquid phase sintering did not occur. It was possible to obtain proper cathode contacts with electrical conductivity of 150(S/cm) and porosity content of 30-40%.m) and porosity content of 30-40%.

• 분석과학
• /
• 제28권3호
• /
• pp.228-235
• /
• 2015

본 연구는 지하수 중 라듐(²²⁶Ra) 분석을 위해 고상추출디스크(solid phase extraction disk)를 이용한 감마선분광분석법(이하 고상추출디스크법)을 제안하고 액체섬광계수기를 이용한 액체섬광계수(liquid scintillation counter, LSC)법 및 마리넬리비커(Marinelli beaker)를 이용한 감마선분광분석기(gamma ray spectrometer)법(이하 마리넬리비커법)과의 회수율 비교를 통해 적용성을 검토하였다. ²²⁶Ra을 회수한 고상추출디스크는 딸핵종의 방출을 방지하기 위해 폴리에틸렌 필름으로 밀봉 후 감마선분광분석기로 분석하였다. 24일 경과 후, ²²⁶Ra과 딸핵종인 ²¹⁴Bi과 ²¹⁴Pb이 방사평형 된 것으로 확인되었다. 라듐 표준물질을 이용하여 고상추출디스크법으로 분석한 딸핵종 ²¹⁴Bi와 ²¹⁴Pb의 회수율은 각각 80% (295.21 Kev)와 104% (351.92 Kev)로 액체섬광계수법보다 높게 나타났다. 바탕시료(blank) 측정시 감마선분광분석기 챔버내 질소를 주입했을 경우는 주입하지 않았을 경우보다 간섭치가 약 10% 이하로 낮아지는 것을 확인하였으며, 5 L 시료를 8만초 동안 측정한 검출한계는 0.17~0.40 pCi/L로 분석되어 미국 EPA 기준치인 1pCi/L를 만족하였다. 고상추출디스크법과 액체섬광계수법을 이용한 7개 지하수 시료 분석 결과, 두 방법의 상관계수(correlation coefficient)는 0.987로 나타나 추가적인 분석을 통해 통계적 유의성을 확보한다면 고상추출디스크법의 적용가능성이 높을 것으로 판단된다. 결과적으로, 고상추출디스크법을 이용한 지하수 중 ²²⁶Ra 농도 분석은 전처리 과정이 비교적 단순하여 분석시간이 절약되고 높은 회수율과 낮은 검출한계치 등의 장점을 가지고 있는 것으로 분석되었다. 또한 고상추출디스크법은 액체섬광계수법과 마리넬리비커법에 비해 많은 양의 시료를 전처리하기 쉽기 때문에 저준위 시료 분석에 유용할 것으로 판단된다.

• Applied Biological Chemistry
• /
• 제40권1호
• /
• pp.1-11
• /
• 1997

• Macromolecular Research
• /
• 제13권3호
• /
• pp.253-256
• /
• 2005

We prepared amino acid-derived diacetylene monomers using solid-phase organic synthesis. The solid-phase synthetic method allowed for the rapid and efficient preparation of functional diacetylenes. Amino acids having hydrophobic sidechains such as alanine, leucine, and phenylalanine, as well as hydrophilic sidechains such as aspartic acid and lysine, were successfully coupled to the diacetylene lipid. The diacetylene monomers prepared in this way were subjected to routine procedures for the generation of polydiacetylene vesicles. Depending on the nature of the side-chains, pink to blue colored polydiacetylenes were generated.

• Bulletin of the Korean Chemical Society
• /
• 제10권1호
• /
• pp.19-22
• /
• 1989

The suitability of BMPI (2-bromo-N-methyl pyridinium iodide) for solid-phase peptide synthesis was investigated. The coupling rate of BMPI/HOBT procedure. BMPI/HOBT was superior to DCC/HOBT couplings using the solid-phase peptide bond formation proceeded to a greater degree of completion than DCC/HOBT method did. Double couplings with 2 equiv. of Bocamino acids and 1.5 equiv. of BMPI and $NEt_3$ and 2 equiv. of HOBT in DMF/MC (1:1 v/v) gave the best result for the preparation of a model compound. Stepwise solid phase peptide synthesis using BMPI/HOBT procedure was successfully utilized for the preparation of $(D-Ala)^2$-dynorphine A. BMPI/HOBT procedure for the synthesis of $(D-Ala)^2$-dynorphine gave better yield (20%) than DCC/HOBT procedure did.

• Archives of Pharmacal Research
• /
• 제25권6호
• /
• pp.801-806
• /
• 2002

Cyclicpeptides are important targets in peptide synthesis because of their interesting biological properties. Constraining highly flexible linear peptides by cyclization is one of the mostly widely used approaches to define the bioactive conformation of peptides. Cyclic peptides often have increased receptor affinity and metabolic stability over their linear counterparts. We carried out virtual screening experiment via docking in order to understand the interaction between HLE-Human Leukocyte Elastase and ligand peptide and to identify the sequence that can be a target in various ligand peptides. We made cyclic peptides as a target base on Metlle-Phe sequence having affinity for ligand and receptor active site docking. There are three ways to cyclize certain sequences of amino acids such as Met-lie-Phe-Gly-Ile. First is head-to-tail cyclization method, linking between N-terminal and C-terminal. Second method utilizes amino acid side chain such as thiol functional group in Cys, making a thioether bond. The last one includes an application of resin-substituted amino acids in solid phase reaction. Among the three methods, solid phase reaction showed the greatest yield. Macrocyclization of Fmoc-Met-Ile-Phe-Gly-Ile-OBn after cleavage of Fmoc protection in solution phase was carried out to give macrocyclic compound 5 in about 7% yield. In the contrast with solution phase reaction, solid phase reaction for macrocyclization of Met-Ile-Phe-Gly-Ile-Asp-Tentagel in normal concentrated condition gave macrocyclic compound 7 in more than 35% yield.