• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.266-267
• /
• 2007

Sandwich sheet with inner structure is expected to find many applications because of high stiffness to mass ratio. In order to simulate forming of sandwich sheet with pyramid core, an effective simulation method is required. Compared to the expensive model using solid elements, cost effective model using simplified elements such as shells and beams is developed. By comparing two models in terms of the cost and accuracy for unit cell deformation, a developed model shows some advantages over the model using solid elements. Evolution of two kind of forming limits, face buckling and core buckling are successfully expressed by developed model. Developed model is also applied in the simulation of square cup drawing and L-type bending. The corresponding experiments are carried out. Deformation shape and wrinkling behavior are compared and discussed. It is found that simulation results using a developed model are in good agreement with experiments.

• Structural Engineering and Mechanics
• /
• v.26 no.3
• /
• pp.343-361
• /
• 2007

This article presents a numerical tool for dimensioning two-threaded fasteners connecting prismatic parts subjected to fatigue tension loads that are coplanar with the screw axis. A simplified numerical model is developed from unidirectional finite elements, modeling the connected parts and screws with bent elements and the elastic contact layer between the parts with springs. An algorithm updating the contact stiffness matrix, calculating forces and displacements at each node of the structure and thus normal stresses in the screws in both static and fatigue is further developed using C language. An experimental study is also conducted in parallel with the numerical approach to validate the developed model assumptions, the numerical model and the 3D finite element results. Since stiffness values for the compressive zones in the parts are analytically difficult to determine, a statistical software method is used, from which a tuning factor is derived for identifying these stiffness values. The method is also applied to set out the influence of each parameter on the fatigue behaviour of each screw. Finally, the developed model will be used to establish a new, sophisticated, fast and accurate tool for dimensioning bolted mechanical structures.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.22 no.2
• /
• pp.15-23
• /
• 2016

Purpose: Planning space of the house is important as a universal place to relieve stress of contemporary people. Void space is easy to perform mental and cultural programs in aspect of affording the healing behavior. The "Interface" accommodates healing behaviors through mutual interchange between void space and solid space as the edge of the solid space around void space. This study presents a efficient theory of healing space through combining space theory with the Kitwood's theory of psychiatry used for the art therapy. Methods: Spatial elements based on Kitwood's theory converges towards 2 behavioral elements; Meditation(-), Sense of Community(+). Balancing with reciprocal complement between behaviors of passive and stable "Meditation(-)" and active and released "Sense of Community(+)" was analysed. Results: "Faciliation" can be used in combination with "Flow(+)" as active factor. "Validation" is combined with "Prospect(+,-)", and divides into 2 factor ; "Recognition-Refreshment(-)", "Reaction-Social Exchange(+)". "Holding" is combined with "Refuge(-)" as passive factor. Implications: This study established concept of spatial healing elements in connection with theory of Psychiatry about Alzheimer that is extreme situation of stress. This study is expected to enhance the validity and efficiency in analysis of healing space.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.700-705
• /
• 2004

Shell finite elements are widely used for the analysis of thin section objects such as sheet metal parts, automobile bodies and et al. due to their computational efficiency. Since many of input data for finite element analysis are given as solid models or triangulated surface models, one should extract midsurface information from these input data initially and then construct shell meshes on the extracted midsurfaces. In this paper, a method of generating shell elements on midsurfaces directly from input models have been proposed. In order to construct shell meshes, the input models should be triangulated on surfaces first, and then tetrahedral elements are generated by using an advancing front method, and finally mid shell surfaces are obtained from tetrahedral meshes. Some examples are given to demonstrate the efficiency of the proposed method.

• Korean Journal of Computational Design and Engineering
• /
• v.1 no.1
• /
• pp.65-75
• /
• 1996

This paper describes an automatic finite element(FE) mesh generation for three-dimensional structures consisting of free-form surfaces. This mesh generation process consists of three subprocesses: (a) definition of geometric model, i.e. analysis model, (b) generation of nodes, and (c) generation of elements. One of commercial solid modelers is employed for three-dimensional solid and shell structures. Node is generated if its distance from existing node points is similar to the node spacing function at the point. The node spacing function is well controlled by the fuzzy knowledge processing. The Delaunay method is introduced as a basic tool for element generation. Automatic generation of FE meshes for three-dimensional solid and shell structures holds great benefits for analyses. Practical performances of the present system are demonstrated through several mesh generations for three-dimensional complex geometry.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.2
• /
• pp.20-28
• /
• 1996

Compound surface modeling is widely used for die cavities and punches. A compound surface is defined in 3-D space by specifying the topological relationship of several anlytic surface elements and a sculptured surface. A constructive solid gemonetry scheme is employed to model the analytic compound surface. the desired compound surface can be accomplished by specifying topological reationship in terms of boolean relations between pimitives and the sculptured surfaces. Additionally, a method is presented for checking and avoiding the tool interference occuued in machining the compound surface. Using this method. the interference of concave, convex, and side region can be checked easily and avoided rpapidly.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.4
• /
• pp.368-376
• /
• 2012

According to developed distributed generators, Solid State Circuit Breaker(SSCB) is essential for high power quality of DC Grid. In this paper, a simple and new structure of DC SSCB with a fast circuit breaker and fault current limiter is proposed. It can help to choice low specification of elements because of the limiting of fault current and achieve economic efficiency for minimizing auxiliary SCRs. Also all of SCRs have little switching loss because they operate under ZVS and ZCS. Through simulations and experiments of short-circuit fault, the performance characteristic of proposed circuit is verified and a guideline is so suggested that the DC SSCB is applied for a different DC grid using formulas.

• Structural Engineering and Mechanics
• /
• v.1 no.1
• /
• pp.61-74
• /
• 1993

A new three-dimensional transition solid element was presented for the automated three-dimensional adaptive h-refinement or the local mesh refinement where the steep stress gradient exists. The proposed transition element was established by adding variable nodes(element nodes) to basic 8-node for an effective connection between the refined region and the coarse region with minimum degrees of freedom possible. To be consistent in accuracy with 8-node solid element with nonconforming modes, this transition element was also improved through the addition of the modified nonconforming modes. Numerical examples show that the performance of the element and the applicability to 3D adaptations are satisfactory.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.4 no.2
• /
• pp.193-198
• /
• 2004

This paper describes an automatic finite element (FE) mesh generation for three-dimensional structures consisting of tree-form surfaces. This mesh generation process consists of three subprocesses: (a) definition of geometric model, (b) generation of nodes, and (c) generation of elements. One of commercial solid modelers is employed for three-dimensional solid structures. Node is generated if its distance from existing node points is similar to the node spacing function at the point. The node spacing function is well controlled by the fuzzy knowledge processing. The Voronoi diagram method is introduced as a basic tool for element generation. Automatic generation of FE meshes for three-dimensional solid structures holds great benefits for analyses. Practical performances of the present system are demonstrated through several mesh generations for three-dimensional complex geometry.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.06a
• /
• pp.183-195
• /
• 1997

The micorstructural characteristics, particularly $\alpha$-halo formation, in semi-solid state processed hypereutectic Al-Si alloy was investigated. The microstructural changes during reheating of wedge type mold cast ingot, hot-rolled sheet, and Si particulate reinforced Al composite was compared with those occurred during stirring of semi-solid state hypereutectic alloy. In the case of semi-solid state reheating of wedge type ingot and hot-rolled sheet, fine particles of Si as well as $\alpha$-halo formed after heat treatment. Although there seemed to be no coarsening with variations of holding time, the region of $\alpha$-halo decreased due to homogenization. Nucleation and recrystallization was accelerated with the addition of alloying elements during hot rolling resulting in primary Si particle size decrease and $\alpha$-halo formation. In the case of extruded specimens, very little morphological change of reinforcing Si particles was observed. Almost no $\alpha$-halo formed during reheating because of the oxide film formed on the reinforcing Si particles which acted as a diffusion barrier between the matrix and the primary Si particles.