• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.331-334
• /
• 1998

The solid solutions of the Pb(Sc$\_$0.5/Nb$\_$0.5/)$\_$0.57/Ti$\_$0.43/O$_3$ system were prepared. In the PSNT system, it had been known that two-phase region between the rhombohedral and tetragonal phases was observed between 0.425 of PT at room temperature. In this paper, Fe$_2$O$_3$-doped 0.57PSN-0.43PT composition was prepared by conventional method. The dielectric and strain properties were examined using an computerized measuring apparatus, and the resonance characteristics were measured using an impedance gain phase analyzer. We got the data of dielectric constant, dielectric loss, piezoelectric coefficient, piezoelectric voltage coefficient, frequency constant strain constant mechanical quality factor and electromechanical coupling factor.

• The Korean Journal of Ceramics
• /
• 제2권2호
• /
• pp.111-113
• /
• 1996

Dielectric properties at microwave frequency region of the five-layered compound $Ba_5Nb_4O_{15}$ prepared by the conventional solid state reaction method were investigated. $Ba_5Nb_4O_{15}$ has excellent microwave dielectric characteristics; ${\varepsilon}_r$=38, Q=7500 at 10 GHz, and ${\tau}_l$=+50 ppm/K. Since this compound has a high dielectric constant, high Q and sufficiently stable characteristics, it is useful for the applications at microwave frequencies.

• 한국세라믹학회지
• /
• 제32권3호
• /
• pp.295-304
• /
• 1995

Stabilization of the perovskite phase and sequence of reactions occuring during calcination were studied with solid solutions formed between Pb(Zn1/3Nb2/3)O3 and Pb(Fe1/2Nb1/2)O3. In the PZN-PFN composition of equal molar ratio, rhombohedral type pyrochlore phase (Pb2Nb2O7) and PbO-rich distorted cubic type pyrochlore phase (Pb3Nb2O8) were coexisted as intermediate phases at temperatures below 85$0^{\circ}C$, and these phases transformed to a stable cubic type pyrochlore phase, Pb3Nb4O13 solid solution and a perovskite solid solution at temperatures above 85$0^{\circ}C$. The major stable phase as increasing sintering temperatures was a perovskite phase in this binary system and prominent suppression of the pyrochlore phase was achieved by substituting Zn2+ with Fe3+ or by increasing sintering temperature. The composition containing 20mol% PZN possessed the best dielectric properties, and the dissipation factor was lower than 5% in all compositions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.220-223
• /
• 2005

We studied the effect of composition, processing, and sintering temperature on the microwave properties of $Mg_{3-x}Co_x(VO_4)_2$ system which is applicable to LTCC. When $Mg_{3-x}Co_x(VO_4)_2$ was fabricated by solid-state reaction process and sintered at the temperature range of $800\sim910^{\circ}C$, it was found that the optimum composition of x was 2 at which microwave properties of 910$^{\circ}C$-sintered one were as follows: $Q\times f_0\sim55,200GHz$ and $\varepsilon_r\sim10$. When $(MgCo_2)(VO_4)_2$ was fabricated by sol-gel process and sintered at 800$^{\circ}C$, $Q\timesf_0$was 34,400GHz which is much high compared to those fabricated by solid-state reaction process at the same sintering temperature.

• 한국전기전자재료학회논문지
• /
• 제14권6호
• /
• pp.460-465
• /
• 2001

(Ba$_{0.6-x}$Sr$_{0.4}$Ca$_{x}$)TiO$_3$(x=1.10,0.15,0.20) specimens were fabricated by the solid state reaction method and then the structural and dielectric properties as a function of he composition ratio and sintering temperature were studied. As a result of the differential thermal analysis(DTA), exothermic peak was observed at around 102$0^{\circ}C$ due to the formation of the polycrystalline perovskite phase. The BSCT(50/40/10) specimen sintered at 150$0^{\circ}C$ showed the highest average grain size(18.25${\mu}{\textrm}{m}$). The Curie temperature and dielectric constant at room temperature decreased with increasing Ca content. The dielectric constant and dielectric loss of the BSCT(50/40/10) specimen, sintered at 145$0^{\circ}C$, were about 4324 and 0.972% at 1KHz, respectively.ively.

• Journal of Electrical Engineering and Technology
• /
• 제10권2호
• /
• pp.647-652
• /
• 2015

A fully coupled finite element analysis (FEA) technique was developed for analyzing the discharge phenomena and dielectric liquid flow while considering surface charge density effects in dielectric flow guidance. In addition, the simulated speed of surface charge propagation was compared and verified with the experimental results shown in the literature. Recently, electrohydrodynamics (EHD) techniques have been widely applied to enhance the cooling performance of electromagnetic systems by utilizing gaseous or liquid media. The main advantage of EHD techniques is the non-contact and low-noise nature of smart control using an electric field. In some cases, flow can be achieved using only a main electric field source. The driving sources in EHD flow are ionization in the breakdown region and ionic dissociation in the sub-breakdown region. Dielectric guidance can be used to enhance the speed of discharge propagation and fluidic flow along the direction of the electric field. To analyze this EHD phenomenon, in this study, the fully coupled FEA was composed of Poisson's equation for an electric field, charge continuity equations in the form of the Nernst-Planck equation for ions, and the Navier-Stokes equation for an incompressible fluidic flow. To develop a generalized numerical technique for various EHD phenomena that considers fluidic flow effects including dielectric flow guidance, we examined the surface charge accumulation on a dielectric surface and ionization, dissociation, and recombination effects.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
• /
• pp.79-82
• /
• 2002

$(Ba_{0.6-x}Sr_{0.4}Ca_x)TiO_3$ + ywt% MgO (x=0.10, 0.15, 0.20, y=0.0~3.0) ceramics were fabricated by the conventional solid-state reaction, and their structural and dielectric properties were investigated with variation of composition ratio and MgO doping content. A second phase, representative of MgO, appears in 3wt% MgO-doped BSCT specimens. Average grain sizes decreased with increasing amounts of MgO, and the BSCT(40/40/20) specimens doped with 3wt% MgO showed a value of $9.3{\mu}m$. The Curie temperature and relative dielectric constant at room temperature were decreased with increasing MgO doping content and Ca composition ratio. The relative dielectric constant was non-linearly decreased as the field strength is increased. The tunability was increased with decreasing a Ca content and the BSCT(50/40/10) specimen doped with 1.0wt% MgO content showed the highest value of 6.4% at 5kV/cm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1988년도 추계학술대회 논문집
• /
• pp.105-107
• /
• 1988

The dielectric properties of complex perovskite compound Sr$(Mg_{1/3}Mb_{2/3})$$O_3$-Ba$(Mg_{{1/3}Nb_{2/3})$$O_3$(BMN) system were investigated as a function of composition and sintering time. In the case of the specimens sintered at $1650^{\circ}C$ for same time, dielectric constant and dielectric loss were increased with increasing the mole ratio of BMN. The maximum temperature coefficient of resonant frequency was found in composition Ba$(Mg_{{1/3}Nb_{2/3})$$O_3$. In the case of the specimens with same composition, dielectric constant and dielectric loss were slightly increased with increasing the sintering time. As the sintering time was increased, the temperature coefficient of resonant frequency for SMN was slightly increased, however, that of BMN and ($Sr_{1/2}Ba_{1/2}$) ($Mg_{1/3}Ta_{2/3}$)$O_3$ was largely depended on sintering time.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.482-483
• /
• 2007

For measurement of dielectric constants, the commercial parallel plate electrodes system with guard-ring electrode have been widely used up to now. The capacitance derived from the parallel plate electrodes capacitor with guard-ring electrode is calculated by the equation of ($C={\epsilon}\;{\cdot}\;\frac{area\;of\;electrod}{distance\;between\;electrodes}$). Therefore, in parallel plate electrode capacitor, the diameter of the guarded electrode, the gap size between guarded electrode and guard ring, and distance between two active electrode should be measured precisely to calculate dielectric constants from the measured capacitance. Consequently their mechanical measurement uncertainties are directly contributed. Especially the air-gap between the electrodes and dielectric specimen at the system must be existed and the measurement error derived from the air-gap is impossible to evaluate as measurement uncertainties. In this study, we analyze the uncertainty of the commercial dielectric constant test cell using 3 kinds CRMs.

• 한국세라믹학회지
• /
• 제40권1호
• /
• pp.81-86
• /
• 2003

고상합성한 $CaTiO_3$와 $YAlO_3$의 혼합분말을 소결하여 조성에 따른 미세조직과 고주파 유전특성의 변화를 조사하였다. $CaTiO_3-YAlO_3$ 고용체의 고주파 유전특성은 조성에 민감하게 의존하였다. 최적의 유전특성은 $0.75CaTiO_3-0.25YAlO_3$를 $1500^{\circ}C$에서 3시간 소결하였을 때 유전율 47, 품질계수 35000. 공진주파수의 온도계수 +11 ppm/$^{\circ}C$이었다. 동일 조성을 저온에서 치밀화 시키기 위하여 $CaB_2O_4$를 첨가하였을때 $1200^{\circ}C$ 이상에서 완전 치밀화 되었으며. $1300^{\circ}C$에서 3시간 소결하였을 경우, 유전율 47, 품질계수 37000, 공진주파수의 온도계수 +17ppm/$^{\circ}C$로 유전특성의 저하 없이 저온에서 치밀한 소결체를 얻을 수 있었다. $CaB_2O_4$를 소결조제로 한 $CaTiO_3-YAlO_3$계 소결체는 5~7GHz에서 중간유전율과 높은 품질계수를 갖는 고주파용 유전재료로 활용이 기대된다.