• Asian-Australasian Journal of Animal Sciences
• /
• 제18권8호
• /
• pp.1116-1124
• /
• 2005

The influence of fiber content of hay (low-fiber 47% NDF and high-fiber 62% NDF of DM) and concentrate level (high 50% and low 20% of ration DM) on chewing activity, passage rate and nutrient digestibility were tested on four restrict-fed (11.1 to 13.7 kg DM/d) Holstein cows in late lactation. Aspects of ruminal fermentation and digesta particle size distribution were also investigated on two ruminally cannulated (100 mm i.d.) cows of the same group of animals. All digestion parameters studied were more affected by the fiber content of the hay and its ratio to non structural carbohydrates than by the concentrate level. Giving a diet of high-fiber (62% NDF) hay and low concentrate level (20%) increased chewing activity but decreased solid passage rate and total digestibility of nutrients due to a limited availability of fermentable OM in the late cut fiber rich hay. A supplementation of high-fiber hay with 50% concentrate in the diet seems to improve the ruminal digestion of cell contents, whilst a depression of the ruminal fiber digestibility was not completely avoided. Giving a diet of low-fiber (47% NDF) hay and high concentrate level (50%) reduced markedly the chewing and rumination activity, affected negatively the rumen conditions and, consequently, the ruminal digestion of fiber. A reduction of the concentrate level from 50 to 20% in the diet of low-fiber hay improved the rumen conditions as reflected by an increase of the ruminal solid passage rate and of fiber digestibility and in a decrease of the concentration of large particles and of the mean particle size of the rumen digesta and of the faeces. Generally, it can be summarised that, (i) concentrate supplementation is not a strategy to overcome limitations of low quality (fiber-rich) hay, and (ii) increase of the roughage quality is an effective strategy in ruminant nutrition, especially when concentrate availability for ruminants is limited.

• 생물환경조절학회지
• /
• 제21권3호
• /
• pp.252-260
• /
• 2012

본 연구는 장기 저장 유통을 위해 MA 저장에 적합한 품종 선발을 위해 2011년에 9개, 2012년에 12개의 파프리카 품종을 대상으로 품질과 저장성을 비교하였다. 2011년도 실험에서는 빨간색 품종 중에 과중, 경도 그리고 당도이 높고, 에틸렌 발생률이 낮으며 저장수명도 23일로 두 번째로 길었던 'Mosanto 7044'이 노란색 품종에서는 경도와 당도가 높고, 에틸렌 발생률이 낮았던 'Stayer'가 우수하였다. 2012년도 실험에서는 빨간색 품종 중에 과중, 과피두께, 경도가 높고, 부패율과 에틸렌 발생률이 낮으며 저장 수명이 28일로 세 번째로 길었던 'Nagano'가, 노란색 품종에서는 과피두께, 당도, 비타민 C 함량이 상대적으로 높았고, 에틸렌 발생률이 낮으며 저장수명이 26일로 가장 길었던 'Freestar'가 가장 우수하였다. 과실 품질 특성과 저장수명과의 상관관계를 비교한 결과 에틸렌(r = -0.5504)과 당도(r = 0.6112)가 고도의 상관관계를 보였다.

• 공업화학
• /
• 제9권5호
• /
• pp.758-762
• /
• 1998

유화중합을 이용하여 중량 평균입자크기가 $0.3{\mu}m{\sim}1.5{\mu}m$인 중공 라텍스 입자를 제조함에 있어 평균입자크기와 고형분 함량에 영향을 미치는 반응 인자를 조사하였다. 실험결과 유화제 (SDS)의 농도가 증가함에 따라 친수성 코어 폴리머의 크기가 작아졌으며, 친유성 스티렌 단량체 (styrene monomer)와 개시제 (SPS)의 첨가량이 증가함에 따라 중공입자의 크기가 커졌다. 한편, 친수성 아크릴산의 첨가속도가 증가함에 따라 중공입자의 크기가 작아졌다. 또한, 스틸렌 단량체의 첨가량이 증가함에 따라 에멀젼 폴리머의 고형분 함량이 선형적으로 증가하였다.

• 유기물자원화
• /
• 제10권4호
• /
• pp.86-95
• /
• 2002

도시쓰레기의 혐기성 소화는 에너지원 및 온난화 가스 저감 문제 등에 의해 최근에 사회적 관심사가 되고 있다. 도시쓰레기는 고형분 함량이 높고 질소성분이 낮으며 셀루로스와 헤미셀루로스가 주성분으로 되어 있다. 도시쓰레기의 메탄 전화율은 대개 50%이며 $0.2m^2/kg$ VS에 해당한다. 고형물 농도가 높을수록 긴 수리학적 체류시간이 필요하며 주입물에 접종슬러지를 혼합하여야 한다. 도시쓰레기의 혐기성 소화 시 C/N비는 25가 상한이고 NH3-N의 적정농도는 700mg/L로 알려져 있다. pH조절을 위하여 흔히 석회와 탄산나트륨이 사용되고있는데 탄산나트륨을 3,500mg/L이상 첨가하면 나트륨 독성이 나타난다. 고온성 혐기 소화조는 운용과 관리가 어려우나 병원성 미생물 억제에 효과적인 것으로 알려져 있다. 도시쓰레기의 혐기성 소화공정의 최적화를 이룩하려면 소화공정에 관여하는 미생물의 작동기전에 대한 이해가 필요하다.

• 한국기계가공학회지
• /
• 제3권3호
• /
• pp.5-10
• /
• 2004

The effect of bronze sintered friction materials on frictional and mechanical properties is studied with the content(8~18 wt,%) and shapes (flake and irregular) of graphite that is used as solid lubricants to meet diverse characteristics such as low coefficient of friction, low wear rate and high bending strength. The content and shapes of graphite are optimized by statistical experiments. Friction test was carried out measure friction coefficient, temperature dependence and wear rate. As a result of experiments, the density, hardness and bending strength with a shape of flake graphite are lower and decrease rapidly than that of Irregular, as the content of graphite increases up to 18 wt% Aftei friction test, coefficient of friction is 0.3~0 4 and wear rate is $0.32{\sim}2.98{\times}10^{-7}cm^3/kg{\cdot}m$. When the content of graphite increases, coefficient of friction increases In a shape of flake graphite and decreases in a shape of irregular graphite.

• 한국광물학회지
• /
• 제32권2호
• /
• pp.113-126
• /
• 2019

본 연구 목적은 비-가시성 금 형태로 산출되는 황화광물 정광을 마이크로웨이브-질산용출하여 황화광물을 효과적으로 용해시키고자 하였고, 고체-잔류물을 납-시금법을 적용하여 금을 회수하고자 하였다. 따라서 질산농도, 용출시간 그리고 시료 첨가량 효과에 대하여 마이크로웨이브-용출실험을 각각 수행하였다. 고체-잔류물의 무게 감소율은 질산농도가 증가할수록 그리고 용출시간이 증가할수록 증가하였지만 시료 첨가량이 증가하면 무게 감소율이 감소하였다. 마이크로웨이브-질산용출을 수행한 결과 질산농도 6 M에서, 마이크로웨이브 용출시간 18분에서 황철석이 완전히 사라진 것을 XRD 분석에서 확인하였다. 고체-잔류물에 대하여 납-시금법을 수행한 결과, 질산농도가 증가할수록 그리고 용출시간이 증가할수록 함량이 증가된 금 입자들을 회수하였다. 반면에 시료 첨가량이 증가할수록 금 함량이 감소하는 입자들을 회수하였다.

• 한국식품과학회지
• /
• 제30권6호
• /
• pp.1327-1332
• /
• 1998

The optimum thermal condition of retort Biji product was determined by heat penetration curve, aerobic bacteria count and sensory test. Retort Biji showed a simple logarithmic heating curve regardless of solid content. Heating time was a $26{\sim}27$ min until Fo value reached 9 min and the amount of microorganism in the Biji product sterilized for 26 min at $121^{\circ}C$ were decreased to $10^{-4}\;CFU/g$, indicating the safe range for retort product. The rate of heat penetration was reduced as solid content and size of product were increased, whereas sterilization temperature and initial temperature of product influenced the heat penetration curve. Sensory scare indicated that there was no significant difference in color, flavor, and appearance among different thermal processes. However, Biji product sterilized at $121^{\circ}C$ showed the highest score in overall preference value.

• 한국식품영양과학회지
• /
• 제23권5호
• /
• pp.816-821
• /
• 1994

The physicochemical properties and cooking qualities of six cultivars of covered barley, four malting barley and six naked barley were investigated. The 1, 000 kernel weight was heavier in the malting barley and ash content was the highest in covered barley. The varietal variation of amylose content was 17.7 to 20.2%. $\beta$-Glucan viscosity was generally lower in the malting barely, and varied greatly among barley cutivars with 2.16 to 8.47 cSt. The pearling rate was highest in naked barley with a mean of 75.5% and protein content of aw and pearled barely was significantly different with cultivars. In the cultivars tested, Doosan 8, Youngsan and Iri 5 showed the higher milling rate. Amylose patterns showed that the covered barley cultivars has lower gelatinization temperature and higher peak height and height at 50 $^{\circ}C$ than the malting and naked barley. The water absorptions were highest in covered barley cultivars , and lowest in naked barley cultivars. The soluble solid was highest in naked barley cultivars.

• 한국세라믹학회지
• /
• 제22권2호
• /
• pp.25-32
• /
• 1985

Effect of alkali $SO_3$ and $C_2S$ content and cooling condition of clinker on the formation of unstable alkali and cooling condition of clinker on the formation of unstable alkali was investigated. As a result alkali and $SO_3$ content of clinker were the main factors of unstable alkali formation and equation (7) in which the two factors were the variables showed a good agreement with the observed results. Water soluble alkali content of sulphate was decreased with increase of $C_2S$ content of clinker resulted by the increase of solid solution rate of alkali to clinker minerals. But change of unsatble alkali content accordint to the increase of $C_2S$ content was slight. A increasing tendency of ignition loss of clinker with increase of unstable alkali content was found.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.210-211
• /
• 2017

According to KS F 2560, water-reducing agents used when mixing concrete are to undergo quality evaluation testing slump, air contents, setting time, etc., when delivered from the admixture factory to the ready mixed concrete site. Yet in actual acceptance testing this could be substituted by the score report of the admixture company, in which a possibility of low reliability lies. Therefore this study sought to analyze whether by artificially changing the solid content rate of lignin- and naphthalene-based water-reducing agents and using a liquid densimeter evaluate the quality of the admixture. The results showed that the Type B liquid densimeter was most appropriate and 50cc the most appropriate capacity for the mass cylinder. Also, judging from the changes in density and pH according to the changes in solid content rate, it concludes that a rapid appraisal of the quality of lignin- and naphthalene-based water-reducing agents would be possible using a Type B liquid densimeter.