• Journal of Environmental Science International
• /
• v.17 no.8
• /
• pp.925-932
• /
• 2008

Manufactures of automotive repair finishes are tending to reduce more and more the level of volatile organic compounds (VOCs) in their paint processes in order to comply with increasingly strict environmental legislation. The production of high solids paints is a way to solve this problem. However, the application of high-solids paints is limited primarily by the viscosity of resin which is strongly related to painting ability: the higher solid content, the lower desired property. In this study, alkyl copolymer with low viscosity was synthesized by the introduction of the monomers with long-side chains and functional groups which improve flexibility and cross-linking density, respectively. The solid content of the paint prepared with the synthesized resin was 80wt% and its VOCs was reduced by 20%, compared to the commercialized paint. Also, the physical and mechanical properties of coatings on steel sheets were similar to commercialized one.

• Korean Journal of Food Science and Technology
• /
• v.23 no.5
• /
• pp.605-609
• /
• 1991

The physical properties which must be considered as engineering factors affecting on the evaporation process of fruit juices are boiling point rise, density, viscosity, thermal conductivity and specific heat. These factors are varied with food ingredients, soluble solids, pressure and temperature. In the reserch, it has been worked to obtain the data and to develop prediction model for the boiling point rise as a faction of soluble solid and pressure by the regression of SPSS package program. For the prediction model of density, it was developed as a fuction of soluble solid content on apple and pear juices. For the viscosity model, it was establised by the factors of temperature and content of soluble solid through the optimization program.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.4
• /
• pp.361-368
• /
• 2012

The present study was conducted to develop persimmon peel, a by-product of dried persimmon manufacturing, as a feed additive via lactic acid bacteria fermentation. Pediococcus pentosaceus, Lactobacillus plantarum, and three strains of Leuconostoc mesenteroides were used as a starter culture in the solid state fermentation of persimmon peel, and antioxidant activity and total polyphenol content were assessed. Leuconostoc mesenteroides KCTC 3100 showed high antioxidant activity (p<0.05), whereas Pediococcus pentosaceus showed high total polyphenol content (p<0.05). These two strains were thus selected as starter culture strains. Glucose, sucrose and molasses were used as variables for optimization and a total 15 experimental runs were produced according to Box-Behnken design. Regarding significant effects of variables, molasses showed linear and square effects on antioxidant activity of persimmon peel fermentation (p<0.05). In conclusion, optimum concentrations of glucose, sucrose, and molasses were determined to be 4.2, 3.9 and 5.3 g/L, respectively, using a response surface model. Antioxidant activity was also improved 2.5 fold after optimization.

• Journal of the Korean Ceramic Society
• /
• v.35 no.12
• /
• pp.1316-1322
• /
• 1998

The amount of VC and C/N ratio in Ti(CN) was varied to investigate the effect of VC addition on the mi-crostructural change in Ti(CN)-Ni system. As the amount of VC addition increases in Ti(C0.7N0.3)-20Ni sys-tem a complete solid solution was observed in Ti(C0.7N0.3)-20Ni-25VC system. It implies that the ratio of the dissolution rates of Ti(C0.7N0.3)to that of VC is nearly 2:1 at the sintering conditions used in this study. It was found from the experiments that the system composed of the Ti(C0.7N0.3) phase exhibits a rimless structure and relatively small amount of solid solution. That is among Ti(C0.7N0.3) phase exhibits a rimless structure and relatively small amount of solid solution. This is among Ti(C1-xNx) phases the dissolution rate of Ti(C0.3N0.7) is the lowest. Also fracture toughness(KIC) of the cermet was measured by indentation method. Attentions were paid to crack propagation path to look for a dominant fracture mode and to cor-relate it with fracture toughness values. The fracture toughness was relatively high with the addition of VC content. But the addition of a large VC content reduced the overall toughness of the cermet. This result is explained with the difference in fracture mode.

• Journal of Adhesion and Interface
• /
• v.10 no.4
• /
• pp.174-181
• /
• 2009

The viscosity for hi-solid pressure sensitive adhesive to improve water soluble low viscosity pressure sensitive adhesive polymerized using seeded polymerization. While seed binder polymerizing it produces an optimum polymerization condition, and acrylic acid and seed binder concentration changed were measurement of viscosity variation and adhesive power at the substrate (SUS420J) as flowing results. In adhesive polymerization, seed binder concentration 7 wt%/monomer was recovered 60% of solid content, 2,100 cps of low viscosity and clear adhesive film. When acrylic acid content was 4 wt%/monomer, it was turned excellent adhesive power and holding power.

• Journal of Korea Foundry Society
• /
• v.7 no.2
• /
• pp.108-113
• /
• 1987

Al-Cr alloy with composition in the range from 1.5 wt% to 10 wt% Cr were rapidly solidified from the melt by the single roller method. The supersaturated solid solution was obtained up to 6 wt% Cr in Al-Cr alloy for $20{\mu}m$ thickness. Lattice parameter decreased with increasing Cr content at the rate of 0.00456A per wt% Cr up to 6 wt% Cr. Microhardness increased with increasing Cr content at the rate of $10\;Kg/mm^2$ per wt% Cr up to 6 wt% Cr. Microhardness measurements on the Al-6 wt% Cr supersaturated solid solution annealed isothermally showed no sign of age hardening. Decomposition temperature, determined by lattice parameter changes and microhardness changes, was $470^{\circ}C$ for Al-6 wt% Cr supersaturated solid solution. Transmission electron microscopy showed that decomposition within one hour below $400^{\circ}C$ occurred at grain boundaries only, and also the additional decomposition within grains being evident at $450^{\circ}C$ The coarse precipitate structure showed at $500^{\circ}C$ and $550^{\circ}C$, respectively. The coarse precipitate structure is considered $Al_7Cr$.

• Korean Journal of Food Science and Technology
• /
• v.47 no.2
• /
• pp.149-157
• /
• 2015

The effects of feed moisture content (25, 35, and 45%), screw speed (230, 250, and 270 rpm), and barrel temperature (130, 140, and $150^{\circ}C$) on the product yield and soluble arabinoxylan (SAX) content from destarched corn fiber (DCF), and its optimization were investigated. The yield and SAX content of corn fiber gum (CFG) from the extruded destarched corn fiber (EDCF) were higher than those of DCF. Statistical analyses revealed that the feed moisture content and barrel temperature had a significant effect on the CFG yield and total SAX content. The optimum extrusion pretreatment conditions were as follows: feed moisture content, 30%; screw speed, 260 rpm; barrel temperature, $133^{\circ}C$. This study showed that the response surface methodology was suitable for the optimization of the extrusion conditions used to maximize the CFG yield and total SAX content from EDCF.

• Journal of Welding and Joining
• /
• v.16 no.6
• /
• pp.77-85
• /
• 1998

Effects of non-cleaning and cleaning fluxes on the wetting properties and defects at flow soldered joints were investigated. Non-cleaning flux (R-type of 3.3% solid content) and cleaning flux (RMA-type of 15% solid content) were used. Wetting test was accomplished by wetting balance method with changing surface state of wetting specimen, CU. Sn-37%Pb solder was used for wetting test and flow soldering. As experimental results, the wetting time for vertical force from the surface tension being zero was mainly affected by surface state of the wetting specimen. Non-cleaning flux had a good wettability compared with cleaning flux. In case of non-cleaning flux, conveyor speed had a great affection to defects of bridge, icicle, and poor solder.

• Journal of the Korean Society of Combustion
• /
• v.7 no.3
• /
• pp.16-22
• /
• 2002

Combustion performance of an internally cycloned circulating fluidized bed for paper sludge was discussed through a series of batch type experiments. Operation parameters such as water content, feeding mass of sludge and secondary air injection rate were varied to find out the effect on the combustion performance, which was examined with carbon conversion rate and pollutant emission such as CO and NOx. A conventional solid fuel reaction was observed in the experiments of varying water content and feeding mass of the sludge, which is characterized with kinetic limited reaction zone, diffusion limited reaction zone and transition zone. Secondary air injection with swirl enhances the mixing of the gas phase as well as the solid phase, and improves combustion efficiency accompanied with higher carbon conversion rate and lower pollutant emission rate.

• Journal of Applied Biological Chemistry
• /
• v.59 no.1
• /
• pp.57-62
• /
• 2016

In this study, we optimized fermentation conditions for the solid state fermentation of rice bran with Monascus pilosus KCCM60084, and the antioxidant activities were investigated. Optimal fermentation conditions were determined by the production of Monacolin K, a functional secondary metabolites with cholesterol lowering activity. The highest Monacolin K production were 2.88 mg/g observed on day 10 with 45% moisture content in the substrate when inoculated with 5% inoculum (w/w). Reducing power, iron chelating activity and $ABTS^+$ radical scavenging activity were significantly enhanced after fermentation by 60, 80, and 38% respectively. Furthermore, the content of total flavonoid were found to be increased by 4.58 fold. Based on these results, Monascus-fermented rice bran showed strong possibility to be used as a natural antioxidant agent due to its enhanced antioxidant activity.