• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.1008-1014
• /
• 2012

The amount of domestic carbon dioxide emissions is more than 600 million tons/year. The emitted $CO_2$ should be captured and stored, however, suitable storage sites have not been found yet. A lot of researches on the conversion of captured carbon dioxide to useful carbon source have been conducted. The purpose of this study is to convert stable carbon dioxide to useful resources using less energy. For this purpose reducing gas and metallic oxide (activator) are required. Hydrogen was used as reducing gas and cobalt ferrite was used as activator. Considering that activator has different physical properties depending on synthesis methods, activator was prepared by hydrothermal synthesis and solid method. Decomposition characteristics of carbon dioxide were investigated using synthesized powders. Temperature programmed reduction/oxidation (TPR/TPO) and thermogravimetric analyzer (TGA) device were used to observe the decomposition characteristics of carbon dioxide. Activator prepared by solid method with 5 and 10 wt% CoO content showed an excellent performance. In TGA experiments with samples prepared by the solid method, reduction by hydrogen was 29.0 wt% and oxidation by $CO_2$ was highest in 27.5 wt%. 95% of adsorbed $CO_2$ was decomposed with excellent oxidation-reduction behaviors.

• ALGAE
• /
• v.24 no.3
• /
• pp.163-168
• /
• 2009

Grateloupia filicina (J.V. Lamouroux) C. Agardh (Halymeniaceae, Cryptonemiales, Rhodophyta) is an edible seaweed as well as an important source of carrageenan. In the present study, attempt has been made to develop a suitable protocol for effective regeneration of the seaweed and the rapid multiplication of the desired varieties. The young upright thallus of G. filicina was grown in axenic culture using both solid and liquid media. The various media tested were f/2, Provasoli’s Enriched Seawater (PES) and Enriched Seawater (ESW). The effect of glycerol (as a carbon source) and various plant growth regulators i.e. auxin (NAA) and cytokinins (Kinetin and BA) were tested. Although, regeneration of young thalli was observed from the cut ends in all the media, better growth was found in f/2, PES, f/2 (0.5% Glycerol), f/2 (NAA ${10^{-5}}_M)\;and\;f/2\;(BA\;{10^{-6}}_M$). On the other hand callusing was observed only in solid media supplemented with low concentration of Glycerol (0.5%) in f/2, NAA ${10^{-5}}_M\;in\;f/2,\;PES\;and\;BA\;{10^{-5}}_M$ in f/2. Young thalli were developed from the callus sub culture after 40 days of inoculation.

• Research in Plant Disease
• /
• v.27 no.3
• /
• pp.99-106
• /
• 2021

The fungal isolate Isaria javanica pf185 has potential as a mycopesticide because it demonstrates insecticidal activity against the green peach aphid and antifungal activity against Colletotrichum gloeosporioides. For commercialization of this isolate, determination of the optimal and least expensive culture conditions is required; however, these data are not currently available. This study describes the conditions for optimal development of conidia and production of metabolites for the biocontrol of the fungal pathogen. The optimal culture conditions were examined using cultures on solid agar and liquid media. High growth temperature enhanced spore formation but reduced antifungal activity in both solid and liquid media. The highest spore yield was obtained in a medium containing glucose as a carbon source and yeast extract as a nitrogen source. Soybean powder and wheat bran were effective nitrogen sources that promoted spore production and antifungal activity of the isolate. These results revealed the basic, cost-effective growth media for commercial production of a biopesticide with insecticidal and antifungal properties for use in integrated pest management.

• Journal of the Korean Electrochemical Society
• /
• v.15 no.2
• /
• pp.101-108
• /
• 2012

The purpose of this study was to improve the conductivity of $Li_3V_2(PO_4){_3}$ by adding carbon source so that the discharge rate and cyclic properties were improved. Glucose and CNT were added to $Li_3V_2(PO_4){_3}$ and the structure and electrochemical properties were studied. $Li_3V_2(PO_4){_3}$, $Li_3V_2(PO_4){_3}$/C and $Li_3V_2(PO_4){_3}$/CNT were synthesised by solid state reaction using hydrogen reduction method at 600, 700, 800, $900^{\circ}C$. The cathode materials were assembled to coin cell type 2032 with Lithium metal as a counter electrode. The coin cell was galvanostatically evaluated in the voltage range of 3.0~4.8 V.

• Proceedings of the Microbiological Society of Korea Conference
• /
• 2002.10a
• /
• pp.68-72
• /
• 2002

While the biosynthetic gene cluster encoding the pigmented antibiotic actinorhodin is present in the two closely related bacterial species, Streptomyces lividans and Streptomyces coelicolor, it normally is expressed only in S. coelicolor---generating the deep blue colonies responsible for the S. coelicolor name. However, multiple copies of the afsR2 gene, which activates actinorhodin synthesis, result in the ability of S. lividansto also synthesize large amounts of actinorhodin. Here we report that the phenotypic property that historicially distinguishes these two Streptomycesspecies is determined conditionally by the carbon source used for culture. Whereas growth on glucose repressed actinorhodin production in S. lividans, culture on solid media containing glycerol as the sole carbon source dramatically increased the expression of afsR2 mRNA---leading to extensive actinorhodin synthesis by S. lividansand obliterating its phenotypic distinction from S. coelicolor. afsR2 transcription under these conditions was developmentally regulated, rising sharply at the time of aerial mycelium formation and coinciding temporally with the onset of actinorhodin production. Our results, which identify media-dependent parallel pathways that regulate actinorhodin synthesis in S. lividans, demonstrate carbon source control of actinorhodin production through the regulation of afsR2 mRNA synthesis. The nucleotide sequences of afsR2 revealed two putative important domains; the domain containing direct repeats in the middle and the domain homologous to sigma factor sequence in the C-terminal end. In this work, we constructed various sized afsR2-derivatives and compared the actinorhodin stimulating effects in S. lividans TK21. The experimental data indicate that the domain homologous to sigma factor sequence in the C-terminal end of afsR2 plays a critical role as an antibiotic stimulating function. In addition, we also observed that the single copy integration of afsR2 regulatory gene into S. lividans TK21 chromosome significantly activates antibiotic overproduction.

• Journal of Electrochemical Science and Technology
• /
• v.3 no.2
• /
• pp.72-79
• /
• 2012

$Li_2MnSiO_4$ was synthesized using the solid-state method under an Ar atmosphere at three different calcination temperatures (900, 950, and $1000^{\circ}C$). The optimization of the carbon coating was also carried out using various molar concentrations of adipic acid as the carbon source. The XRD pattern confirmed that the resulting $Li_2MnSiO_4$ particles exhibited an orthorhombic structure with a $Pmn2_1$ space group. Cyclic voltammetry was utilized to investigate the capacitive behavior of $Li_2MnSiO_4$ along with activated carbon (AC) in a hybrid supercapacitor with a two-electrode cell configuration. The $Li_2MnSiO_4$/AC cell exhibited a high discharge capacitance and energy density of $43.2Fg^{-1}$ and $54Whkg^{-1}$, respectively, at $1.0mAcm^{-2}$. The $Li_2MnSiO_4$/AC hybrid supercapacitor exhibited an excellent cycling stability over 1000 measured cycles with coulombic efficiency over > 99 %. Electrochemical impedance spectroscopy was conducted to corroborate the results that were obtained and described.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1020-1022
• /
• 2005

We have fabricated a high electron source from carbon nanotubes (CNTs) using hot-press method. Using hot-press method, we are able to control the tube density and the morphology of CNT films. We propose that the high emission current is due to the solid adhesion between the CNTs and substrates and uniform morphology of CNT film.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.15 no.3
• /
• pp.105-111
• /
• 2009

In this work, source reduction of poly ethylene terephthalate (PET) packaging are discussed as aspect of sustainability, such as reuse, refill and recycling through the various treatment methods and historical studies for municipal solid waste (MSW) disposal. Since PET has good chemical, physical and mechanical properties, and provides good oxygen and carbon dioxide barrier properties, PET is one of the most widely used thermoplastic polyester in the U.S. and around the world. As the demand for non-renewable PET is increasing, several approaches have been developed to meet economical feasibility and environmental responsibility without degrading material performance. Several companies, such as Coca-Cola Co., Easterform Packaging Co. and Kraft, have tried to develop lightweight PET bottle, and some of lightweight PET bottles are already commercialized. Reuse and refilling for PET container is well developed in Europe, such as Denmark, German and Netherland by supportive legislation and policies. Recycling process is the best way to economically reduce PET waste. In consequence, advanced technique and further development must be provided due to increasing PET packaging waste.

• Journal of the Korean institute of surface engineering
• /
• v.56 no.4
• /
• pp.259-264
• /
• 2023

As the demand for lithium-ion batteries, a key power source in electric vehicles and energy storage systems, continues to increase for achieving global carbon neutrality, there is a growing concern about the environmental impact of disposing of spent batteries. Extensive research is underway to develop efficient recycling methods. While hydrometallurgy and pyrometallurgy methods are commonly used to recover valuable metals from spent cathode materials, they have drawbacks including hazardous waste and complex processes. Hence, alternative recycling methods that are environmentally friendly are being explored. However, recycling spent cathode materials still remains complex and energy-intensive. This study focuses on a novel approach called solid-state synthesis, which aims at regenerating the performance of spent cathode materials. The method offers a simpler process and reduces energy consumption. Optimal heat treatment conditions were identified based on experimental results, contributing to the development of sustainable recycling technologies for lithium-ion batteries.

• Environmental Engineering Research
• /
• v.20 no.2
• /
• pp.175-180
• /
• 2015

This research focused on the solid and nitrate removal efficiency in a solid digestion-denitrification column. The 20 L up-flow column consisted of 18 L acrylic column with 2 L down-comer inlet tube located in the middle. In the first part, the wastewater with high suspended solids from the Tilapia fish tank was applied into the sedimentation unit at 5 variable flow rates i.e., 11.25, 25.71, 60, 105.88 and 360 L/h. The results indicated that the flow rate of 11.25 L/h (0.57 m/h) gave the highest solid removal efficiency of $72.72%{\pm}8.24%$. However, the total suspended solids removal was highest at 360 L/h (18.13 m/h). In the second part, methanol was added as an external organic carbon source for denitrification process in a hybrid column containing settled solids. The COD:N ratios of 0.5:1, 1:1, 2:1, 3:1, 4:1, 5:1 and 6:1 were investigated and compared with control without methanol addition. This experiment was operated at the HRT of 1 h with 450 L wastewater from recirculating aquaculture pond containing 100 mg-N/L sodium nitrate. The results indicated that the COD:N ratio of 3:1 gave the highest nitrate removal efficiency of $33.32%{\pm}21.18%$ with the denitrification rate of 5,102.88 mg-N/day.