• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1396-1397
• /
• 2011

The world has problem of petrifaction energy exhaustion and environment pollution. We are looking up various solution plans regarding this problem. Solar power is one of the solution to solve the energy shortage problem. But solar power is affected by insolation. So we study tracking solar power system for the generation of electricity more. In this paper, we compared fixed solar power system with horizontal and vertical tracking solar power system. Two method were on he Maximum Power Point(MPP) using Solar pro.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.688-692
• /
• 2007

Solar thermal power generation allows additional benefits of cheap thermal storage and easy hybridization with other fossil fuel-driven power generation. KIER has been performing the project for solar thermal chemical reaction hybrid power generation. The project is to build and operate the first solar thermal chemical reaction hybrid power generation system in Korea. For concentrating solar thermal energy $m^2$ dish type concentrator was adapted and a heliostat is installed for reflecting horizontal insolation to the dish concentrator. At the moment building the dish concentrator including mirror and heliostat with sun tracking system was completed and it's performance are being closely evaluated. This paper will introduce some detailed designs and construction procedures which we have experienced so far.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.113-116
• /
• 2004

Output power of a photovoltaic system changes continuously as it strongly depends on the weather condition(isolation and temperature). Therefore, it is necessary the theoretical model realizes the electrical output characteristics of solar cell. Of several theoretical models for real solar cell, both parametric model and interpolation model are used widely. In this paper, we have propose a improved model of solar cell using its output characteristics that can be extended to calculate the rear solar cell characteristics at various temperatures and insolation. And more, the theoretical research of several models of solar cell using simulation analysis.

• 한국태양에너지학회 논문집
• /
• 제21권1호
• /
• pp.43-49
• /
• 2001

Informations of the solar radiation component are essential for modeling various solar energy systems. These Informations are particularly used for middle and high temperature applications, those need concentrating direct normal insolation. In order to estimate the performance of concentrating systems, it is necessary to know the intensity of the beam radiation, as only this component can be concentrated. The Korea Institute of Energy Research(KIER) has began collecting solar radiation component data since August, 1996. KIER's component data will be extensively used by concentrating system users or designers as well as by research institutes.

• 전력전자학회논문지
• /
• 제25권2호
• /
• pp.111-117
• /
• 2020

The photovoltaic module has the characteristic that the output power varies according to the amount of insolation. If partial shading occurs in an environment composed of an array, a number of local maximum power points (LMPPs) may be generated according to the shading state. Photovoltaic arrays require global maximum power point tracking due to variations in output characteristics caused by solar radiation and temperature. Conventional algorithms, such as P&O and Incond, do not follow the global maximum power point in a partial shaded solar array. In this study, we propose a technique to follow the global maximum power point by using the correlation of voltage, current, and power in solar arrays. The proposed control technique 2qw validated through simulation and experiments by constructing a 2-kW solar system.

• 대한설비공학회지:설비저널
• /
• 제12권1호
• /
• pp.2-11
• /
• 1983

The solar energy retention rate of a flat plate collector can be increased by increasing water flow rate through the collector which also increases the pumping energy incurred in obtaining that solar energy. The problem of optimal flow rate is formulated to fit within the framework of pontryagin's maximum principle and with a few simplifying assumptions, an optimal solution that can be easily implemented is obtaincd, The optimal solution is used in the simulation of a solar heating system using actual climatological data and the results are compared with that of on-off control. The result that not only the object function but, In some cases, also the solar energy retention rate the collector is increased. In is also found that the optimal control gets more advantageous as the solar insolation level gets lower, and also as tile cost of auxiliary heating fuel gets higher.

• 융복합기술연구소 논문집
• /
• 제4권2호
• /
• pp.27-33
• /
• 2014

To well design the solar energy system using solar energy, the correlation to calculate solar irradiation is basically needed. So, this study was performed to reveal the relationships between the solar irradiation and four meteorological observation data(dry bulb temperature, relative humidity, sunshine duration, and cloud cover) which are different from previous other researches. And then, we finally proposed the first order non-linear correlation from the measured solar irradiation using four meteorological observation data with MINITAB. To show the deviation of the solar irradiation between measured and calculated, this study compared using the daily total solar irradiance and the maximum peak value. From those results, the calculation error was estimated about maximum 25.4% for the daily total solar irradiance. The error of the solar irradiation between measured and calculated was made from the curve fitting error. So, solar irradiation prediction correlation with higher accuracy can be obtained using 2nd or higher order terms with four meteorological observation data.

• 한국전기전자재료학회논문지
• /
• 제36권1호
• /
• pp.62-69
• /
• 2023

Recently, renewable energy has been increasing in Korea to reduce greenhouse gas, and solar power generation, which accounts for the largest proportion of renewable energy, is noteworthy. The government policy will further increase solar power generation. In order to implement the policy, it is important to understand the current status of domestic solar power generation facilities. Therefore, the current status of solar power generation facilities in Jinju city close to the south coast and Jeonju city close to the west coast was investigated and compared. By 2020, 618 solar power plants had been installed in Jeonju city and 269 in Jinju city. However, there is not much difference in the amount of solar power generation for business at 9 GWh. The reason is that Jinju city has a lower population density than Jeonju city, so there are enough places to install a large-scale solar power facilities with a large power generation capacity. Monthly solar power generation was the highest in April in both Jeonju city and Jinju city and the lowest in January. In particular, in December, Jinju city showed more solar power generation than Jeonju city because of the large amount of insolation, long sunshine hours, and few clouds.

• 조명전기설비학회논문지
• /
• 제24권4호
• /
• pp.166-176
• /
• 2010

태양전지의 출력 특성은 비선형이고 온도와 일사량에 많은 영향을 받는다. 최대전력점 추종 제어는 태양광 발전의 출력을 최대로 하기 위해 사용되는 제어기법이다. 태양광발전 시스템의 출력 및 효율을 증가 시키기 위해 더욱 우수한 최대전력점 추종 제어기법이 필요하다. 본 논문에서는 태양광 발전 시스템의 효율을 개선하기 위해 일사량을 고려한 새로운 최대전력점 추종 제어 알고리즘을 제시한다. 제시한 알고리즘은 종래의 P&O방법과 CV 방법을 혼합한 것이며, PSIM 시뮬레이터를 통하여 종래의 MPPT 알고리즘과 다양한 일사량 조건에서 성능시험을 비교하였다. 제시한 알고리즘은 종래의 알고리즘에 비해 출력의 자려진동없이 다양한 일사량에서 우수한 성능을 나타냈다. 이로서 본 논문에서 제시한 HB 방법의 최대전력점 추종 제어 알고리즘의 타당성을 입증하였다.

• 태양에너지
• /
• 제18권2호
• /
• pp.1-17
• /
• 1998

국내 태양열 이용기술 개발 현황을 분석하기 위해 기술의 중요성과 태양열의 특징을 소개한 후에 국내의 기술동향을 요소기술인 태양열집열기의 온수기, 산업용 중고온시스템 및 태양에너지건물이용기술순으로 분석하였다. 분석결과 우리나라의 기술수준은 저온이용분야인 온수급탕의 경우 실용화 수준이며, 산업용인 중고온분야는 기초 및 소비시장 확대에 의한 가격의 저렴화 및 정부의 지원정책으로 태양열에너지의 이용을 증대시킬 수 있을 것이다. 이어서 국내 일사량자원과 보급현황을 살펴본 후 대체에너지 기술개발 기본계획상의 중장기 목표와 각분야별 기술의 개요 및 특징을 소개하였다. 국제환경에 대응하면서 국내 태양열 이용 및 보급 확대를 위해서는 기술개발을 통하여 얻어진 결과들이 사장되지 않도록 경쟁성 확보 시점까지 지속적인 수요창출을 위한 경제성 확보를 위해 추가적인 보완연구, 실용화연구 및 실증시범연구 등이 필요하다.