• 제목/요약/키워드: solar array

검색결과 405건 처리시간 0.023초

다목적실용위성 2호의 각 유닛과 Harness 간의 EMC 해석

  • 이나영;이진호
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 2003년도 한국우주과학회보 제12권2호
    • /
    • pp.106-106
    • /
    • 2003
  • 인공위성의 전기적 호환성 해석은 인공위성의 각 유닛들에서 발생할 수 있는 잡음이 인공위성의 정상 동작에 미치는 영향을 분석하고 그 영향을 최소로 만들 수 있는 방안을 연구하기 위해 필요하다. 본 논문에서는 인공위성의 탑제컴퓨터와 탑제체 간의 인터페이스에서 전기 신호의 호환성 해석, Harness의 호환성 해석 그리고 radiation 해석이 이루어졌다. 인공위성의 탑제컴퓨터와 탑제체 간의 인터페이스에서 전기 신호의 호환성 해석은 전기 신호의 전압 레벨이 전압 히스테리시스의 경계 영역에서 충분한 여유를 가지고 있는지 판단하기 위해 필요하다. 전기 신호에 충분한 여유분이 없는 경우 여유분을 증가시키기 위한 방법이 제안되었으며 제안된 방법에 의해 인터페이스의 올바른 동작에 충분한 여유분이 생겼음이 시뮬레이션 결과에 나타났다. Harness의 호환성 해석은 다목적실용위성 2호에 사용된 Harness에 대한 conductive epoxy potting의 전도도를 검증하기 위해 이루어졌다. 본 논문에서는 전송 임피던스 측정 방법을 이용하여 epoxy potting의 전도성이 모든 주파수 영역에서 인공위성의 요구사항에 만족함을 보여준다. Radiation 해석은 인공위성 시스템의 radiated emission(RE)을 추정하고 S-band 수신기와 GPS 안테나와 같은 수신단에 대한 상호간섭에 의한 위험도를 분석하기 위해 필요하다. RF 수신기의 수신 대역에서 발생한 잡음의 영향으로 신호대잡음비가 허용수치이하로 감소하여 위성 명령을 수신하는 동작에 지장을 초래할 수 있다. 본 논문에서는 RF 수신단에 가장 큰 영향을 미칠 것으로 예상되는 star tracker의 RE test 결과를 분석하여 test 결과가 GPS 수신기와 S-band 수신기의 각각의 성능에 적합한지 해석하였다. 또한 solar array regulator의 스윗칭에 의해 발생되는 radiation이 위성 구조체에 미치는 영향을 해석하고 시뮬레이션 하였다.

  • PDF

Ag 나노입자와 나노홀 배열구조를 이용한 초박형 단결정 Si 태양전지의 광흡수 증진 (Optical Absorption Enhancement for Ultrathin c-Si Solar Cells using Ag Nanoparticle and Nano-hole Arrays)

  • 김수정;조윤애;손아름;김동욱
    • Current Photovoltaic Research
    • /
    • 제4권2호
    • /
    • pp.64-67
    • /
    • 2016
  • We investigated the influences of Ag nanoparticle (NP) arrays and surface nanohole (NH) patterns on the optical characteristics of 10-${\mu}m$-thick c-Si wafers using finite-difference time-domain (FDTD) simulations. In particular, we comparatively studied the plasmonic effects of both monomer arrays (MA) and heptamer arrays (HA) consisting of identical Ag NPs. HA improved the optical absorption of the c-Si wafers in much wider wavelength range than MA, with the help of hybridized plasmon modes. The light trapping capability of the NH array pattern is superior to that of the Ag plasmonic NPs. We also found that the addition of the Ag HA on the wafers with surface NH patterns further enhanced optical absorption: the expected short-circuit current density was as high as $34.96mA/cm^2$.

과학위성 1호 전력계 설계 (Power system Design of KITSAT-4 Satellite)

  • 김일송;이준영;윤명중
    • 전력전자학회논문지
    • /
    • 제5권5호
    • /
    • pp.475-483
    • /
    • 2000
  • 본 논문에서는 과학위성 1호의 전력계 설계에 대해서 서술한다. 과학위성 1호의 전력계는 크게 전력단과 제어단으로 나누어지는데 전력단은 200〔Watt〕Buck으로 구성되어 있으며, 제어단은 하드웨어제어기인 최대전력 추적기와 배터리전압제어기, 소프트웨어제어를 위한 배터리 전류제어기와 직접 듀티제어기로 이루어져, 각 동작모드에 따라서 적절한 제어기를 선택할 수 있게 되어 있다. 따라서 신뢰성 있는 제어와 정밀제어를 선택적으로 정할 수 있기 때문에 위성의 운용면에서 용이성을 제공해 준다. 또한 안정된 시스템설계를 위하여 소신호 해석과 제어회로설계방법에 대해서 논의하고, 모의실험으로 시스템의 안정도를 입증하였다.

  • PDF

E-beam 조사하에서 유리의 전하 측정 (Charge Accumulation in Glass under E-beam irradiation)

  • 김대열;최용성;황종선;이경섭
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
    • /
    • pp.268-269
    • /
    • 2008
  • Charging of spacecraft occurs in plasma and radiation environment. Especially, we focused on an accident caused by internal charging in a glass material that was used as the cover plate of solar panel array, and tried to measure the charge distribution in glass materials under electron beam irradiation by using a PEA (Pulsed Electro-Acoustic method) system. In the case of a quartz glass (pure $SiO_2$), no charge accumulation was observed either during or after the electron beam irradiation. On the contrary, positive charge accumulation was observed in glass samples containing metal-oxide components. It is found that the polarity of the observed charges depends on the contents of the impurities. To identify which impurity dominates the polarity of the accumulated charge, we measured charge distributions in several glass materials containing various metal-oxide components and calculated the trap energy depths from the charge decay characteristics of all glass samples.

  • PDF

고해상도 지구관측위성 본체 형상설계 동향 (Recent Trend of the Configuration Design of High Resolution Earth Observation Satellites)

  • 임재혁;김경원;김선원;김진희;황도순
    • 항공우주산업기술동향
    • /
    • 제8권1호
    • /
    • pp.45-54
    • /
    • 2010
  • 본 논문에서는 최근에 개발된 고해상도 지구관측위성의 본체 형상설계 동향에 대해 기술하고자 한다. 인공위성의 본체는 임무, 탑재체, 발사환경, 임무특성, 자세제어 및 추진시스템에 따라 다양한 형상을 갖는다. 또한 2000년대 들어서 시작된 위성영상의 상업화에 따른 영상수요의 증가는 고해상도 영상을 신속히 많이 획득할 수 있는 위성시스템을 요구하고 있다. 이러한 요구에 맞춰 위성의 본체는 가벼우면서도 안정적으로 탑재체를 지지할 수 있도록 설계되고 있으며, 이 중에 형상설계 변화를 본 논문에서 집중적으로 살펴본다.

  • PDF

위성의 전이궤도 열해석 (TRANSFER ORBIT THERMAL ANALYSIS FOR SATELLITE)

  • 전형열;김정훈;김성훈;양군호
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2007년도 추계 학술대회논문집
    • /
    • pp.227-231
    • /
    • 2007
  • COMS (Communication, Ocean and Meteorological Satellite) is a geostationary satellite and has been developing by KARI for communication and ocean and meteorological observations. It will be launched by ARIANE 5. Ka-band components are installed on South panel, where single solar array wing is mounted. Radiators, embedded heat pipes, external heat pipe, insulation blankets and heaters are utilized for the thermal control of the satellite. The Ka-band payload section is divided several areas based on unit operating temperature in order to optimize radiator area and maximize heat rejection capability. Other equipment for sensors and bus are installed on North panel. The ocean and meteorological sensors are installed on optical benches on the top floor to decouple thermally from the satellite. During the transfer orbit operation, satellite will be under severe thermal environments due to low dissipation of components, satellite attitudes and LAE(Liquid Apogee Engine) firing. This paper presents temperature and heater power prediction and validation of thermal control design during transfer orbit operation.

  • PDF

대용량 태양광 발전용 멀티센트럴 시스템 (Multi-Central System for Large Scale PV Power Generation)

  • 박종형;고광수;김흥근;노의철;전태원
    • 한국태양에너지학회:학술대회논문집
    • /
    • 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
    • /
    • pp.427-432
    • /
    • 2012
  • This paper proposes efficient operation method of PV system consisted of multi-central which is suitable for large scale system. The multi-central system used switch at a DC-link and applied proposed algorithm can improve the efficiency and the reliability on the existing system. This algorithm, with advantage of Multi-Central system can minimize the effect of different characteristic of each PV array due to a shadow or damaged PV cell. Each system is analysed and maximum power point tracking control, DC-link voltage control and output current control is used commonly. The validity is verified after comparing of the existing system and proposed system by simulation.

  • PDF

태양광 발전 시스템의 노이즈 감소와 상태추정을 위한 비선형 제어기 설계 (Nonlinear Controller Design for Noise Reduction and State Estimation in the Photovoltaic Power Generation System)

  • 김일송
    • 전력전자학회논문지
    • /
    • 제14권4호
    • /
    • pp.261-267
    • /
    • 2009
  • 최대전력점 추적기는 태양광 발전시스템의 대표적인 기능이다. 최대 전력점을 추종하기 위해서는 태양전지의 전압과 전류의 측정을 필요로 한다. 만약 측정 신호에 노이즈가 포함되어 있으면 발생되는 전력이 감소되어 태양광 발전의 효율이 감소하게 된다. 노이즈가 포함된 신호에 확장 칼만 필터 이론을 적용하여 최적의 추정된 신호를 얻어 낼 수 있다. 칼만 필터는 랜덤 노이즈가 포함된 신호에서 최적의 신호를 얻어내는데 사용된다. 또한 칼만 필터의 적용결과로 인덕터 전류와 같은 측정하지 않는 신호도 센서리스 추정이 가능하다. 본 논문에서는 시스템 모델링 방법과 확장 칼만 필터 설계 방법이 소개된다. 실험 결과로서 제안된 제어기의 성능을 확인하였다.

통신해양기상위성 (COMS)의 모멘텀 덤핑 사용 연료량 분석 (Fuel Budget Analysis of the COMS Momentum Dumping)

  • 박봉규;양군호;박영웅;최재동;이상철
    • 한국항공우주학회지
    • /
    • 제33권9호
    • /
    • pp.81-88
    • /
    • 2005
  • 본 논문은 단일 태양전지판으로 구성된 통신해양기상위성(COMS)에 대하여 모멘텀 덤핑에 소요되는 연료량을 분석하였다. 먼저 하루 중 일정한 시간에 모멘텀 덤핑을 수행할 경우를 가정하여 최적의 시간을 선정하는 작업을 수치해석적인 접근을 통하여 수행하였고 요구되는 연료량을 분석하였다. 또한 모멘텀 덤핑에 소요되는 연료량을 절감하기 위하여 남북위치유지 시점과 모멘텀 덤핑시점을 근사적으로 일치시키는 방안을 제안하였다. 마지막으로 제안된 기법의 유효성을 분석하기 위하여 궤도 시뮬레이션을 수행하였다.

Cascaded H-Bridge Five Level Inverter for Grid Connected PV System using PID Controller

  • Sivagamasundari, M.S.;Mary, P. Melba
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제16권4호
    • /
    • pp.451-462
    • /
    • 2016
  • Photovoltaic energy conversion becomes main focus of many researches due to its promising potential as source for future electricity and has many advantages than the other alternative energy sources like wind, solar, ocean, biomass, geothermal etc. In Photovoltaic power generation multilevel inverters play a vital role in power conversion. The three different topologies, diode-clamped (neutral-point clamped) inverter, capacitor-clamped (flying capacitor) inverter and cascaded h-bridge multilevel inverter are widely used in these multilevel inverters. Among the three topologies, cascaded h-bridge multilevel inverter is more suitable for photovoltaic applications since each pv array can act as a separate dc source for each h-bridge module. This paper presents a single phase Cascaded H-bridge five level inverter for grid-connected photovoltaic application using sinusoidal pulse width modulation technique. This inverter output voltage waveform reduces the harmonics in the generated current and the filtering effort at the input. The control strategy allows the independent control of each dc-link voltages and tracks the maximum power point of PV strings. This topology can inject to the grid sinusoidal input currents with unity power factor and achieves low harmonic distortion. A PID control algorithm is implemented in Arm Processor LPC2148. The validity of the proposed inverter is verified through simulation and is implemented in a single phase 100W prototype. The results of hardware are compared with simulation results. The proposed system offers improved performance over conventional three level inverter in terms of THD.