• 한국농공학회지
• /
• 제13권4호
• /
• pp.2456-2470
• /
• 1971

수수자원(水水資源) 개발(開發)을 위(爲)한 Earth Dam이나 도로(道路)와 같은 흙을 주(主)로하는 많은 구조물축조(構造物築造)에 있어서 그 구조물성질(構造物性質)에 따라서 흙의 종류(種類)가 결정(決定)되며 때로는 흙의 성질(性質)에 따라서 구조물(構造物)의 설계(設計)가 달라진다. 특(特)히 저수(貯水)를 목적(目的)으로 하는 제당축조(堤塘築造)에서 중심점토재료(中心粘土材料)의 선정(選定)은 완전(完全)한 구조물(構造物)을 위(爲)해서 또 공사비(工事費) 절감(節減)을 위(爲)해서 대단(大端)히 중요(重要)한 문제(問題)라 하겠다. 이를 위해서 여러종류(種類)의 흙이 사용(使用)되고 있고 이들 흙의 제반(諸般) 역학적(力學的) 성질(性質)이 이미 실시(實施)된 많은 시험결과(試驗結果)로서 실제(實際) 설계(設計)에, 또 구조물(構造物) 안전도(安全度) 검토(檢討)에 응용(應用)되고 있으나 이들 결과(結果)는 그 흙의 최적함수비(最適含水比) 최대밀도(最大密度)에 대(對)한 것으로 실제(實際) 시공과정(施工過程)에서 볼 때 최과함수상태하(最過含水狀態下)에서 시공(施工)하기는 어려운 것으로 이런 경우(境遇)에 흙의 역학적성질(力學的性質)에 대(對)한 자료(資料)가 없어 설계(設計) 및 안전도(安全度) 검토(檢討)에 지장(支障)이 많은바 이를 위해서 본(本) 시험(試驗)을 실시(實施)하였다. 1. 시험(試驗)에 사용(使用)한 시료(試料)는 실제(實際) 저수지(貯水池) 축제재료(築提材料)로서 사용(使用)하고 있는 재료(材料)를 현장(現場)에서 채취(採取)하였다. 2. 본(本) 시험(試驗)은 농업진흥공사(農業振興公社) 농공시험소(農工試驗所)에서 실시(實施)하였다. 3. 본(本) 시험(試驗) 결과(結果)로서 다음과 같은 점(點)을 실제업무(實際業務)에 응용(應用)할 수 있다. 가. 현장함수비(現場含水比)를 알므로서 공사재료(工事材料)로서의 적부판단(適否判斷)을 내릴수 있다. 나. 함수비(含水比)가 변화시(變化時) 다짐율(率)과 투수계수(透水係數)를 알 수 있으므로 실제설계(實際設計) 및 시공관리(施工管理)에 적용(適用)할수 있다. 다. 시공(施工)된 구조물(構造物)의 다짐율(率)을 알므로서 이에 적합(適合)한 안정도검토(安定度檢討)를 할수 있다. 라. 도로(道路)와 같은 높은 지내력(支耐力)을 요(要)하는 구조물(構造物)을 위(爲)해서는 최적함수비(最適含水比) 내지 건조상태(乾燥狀態)가 좋고 저수지(貯水池)와 같은 지수(止水)를 요(要)하는 구조물(構造物)에서는 최적함수비(最適含水比) 내지 습윤상태(濕潤狀態)로 시공(施工)함이 좋다. 그러나 고소성(高塑性) 흙에서는 지내력(支耐力) 및 지수(止水)를 위해서 공(共)히 후자(後者)의 경우(境遇)가 좋다. 이상(以上)의 연구결과(硏究結果)가 완벽(完璧)하다고는 할수 없으나 본(本) 실험(實驗) 결과(結果)로서 함수비(含水比) 변화(變化)에 대(對)한 제반(諸般) 역학적(力學的) 성질(性質)의 변화상태(變化狀態)를 구(求)하기에 최선(最善)을 하였으므로 이 분야(分野)의 연구자(硏究者)나 설계자(設計者) 또는 시공자(施工者)와 같은 실무자(實務者)에게 다소(多少)의 도움이 된다면 큰영광(榮光)으로 생각 하겠다.

• Journal of Biosystems Engineering
• /
• 제33권4호
• /
• pp.269-275
• /
• 2008

This study was conducted to design an impedance sensor that can measure soil water content of soils. Partial least square regression (PLSR) was applied to soil impedance data preprocessed with a smoothing method. An optimal sub-spectrum size and wavelength range were determined by comparing the coefficient of determination ($R^2$) and root mean square error (RMSE) of the PLSR models obtained using soil impedance data. various PLS analysis. Based on the PLSR analysis, it would be concluded that the optimal spectrum measurement range was $32.0{\sim}50.0\;MHz$ with the optimal sub-spectrum size of about 18.5 MHz.

• 한국수자원학회논문집
• /
• 제32권6호
• /
• pp.741-749
• /
• 1999

본 연구에서는 TDR의 반향파의 특성과 총토양전기전도도의 관계를 이용한 비포화 토양에서의 용존오염원 농도를 측정하는 방법을 개발하였다. 본 연구에서 제안한 방법은 두 가지 중요한 관계를 결합한 것으로 첫 번째는 함수량이 일정할 경우 전기전도도와 토양수 농도는 선형관계를 유지한다는 것이며, 두 번째는 천이상태의 용존여염원의 농도를 측정할 수 있게 하기 위해 함수량과 전기전도도의 관계를 설정하는 것이다. 함수량과 전기전도도의 관계를 추정하는 식들이 여러 연구자들에 의하여 제안되었으나, 본 연구에서는 측정의 정확도를 높이기 위하여 한계함수량의 개념을 도입한 새로운 추정식을 제안하였다. 한계함수량 개념을 이용하여 실험자료를 선형, 비선형 구간으로 나누어 분석하였는데, 실험자료의 반영정도를 증가시킬 수 있어 본 연구에서 제안된 식을 이용하여 추정된 전기전도도와 함수량관계는 다른 제안식에 비하여 개선된 결과를 보여 주었다. 본 연구에서 제안된 전기전도도와 함수량관계 추정식을 이용한 천이상태의 오염원 농도 측정법은 함수량이 급하게 변하는 토양에도 적용할 수 있는 매우 유용한 방법으로 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.147-152
• /
• 2001

This study investigated one-dimensional vertical infiltration to an unsaturated residual soil by numerical solutions, FDM. In order to estimate the parameters needed for numerical analysis, tire soil-water characteristic curve(SWCC) of Shinnae-dong soil, one of the most typical residual soils in Korea, were experimentally obtained. Then, the statistical analysis for obtaining the SWCC was performed. The numerical solution to the linearized governing equation for unsaturated groundwater flow provides the infiltration characteristics for the unsaturated residual soil represented by transient pressure profiles and water contents profiles.

• 한국토양비료학회지
• /
• 제42권별호
• /
• pp.102-125
• /
• 2009

• 한국농공학회지
• /
• 제20권1호
• /
• pp.4575-4591
• /
• 1978

In order to investigate the effects of grain size distribution, cement content, and molding pressure on the strength and durability of soil-cement mixtures, a laboratory test of soil cement mixtures was performed at four levels of cement content, five levels of molding pressure, and four levels of normal curing periods. The results are summarized as follows: 1. Optimum moisture contents in loam soil and maximum dry density in sand soil increased with the increase of cement content, but in others, both optimum moisture contents and maximum dry density were changed ununiformly. 2. When the specimens were molded with molding pressure, 50kg/$\textrm{cm}^2$, strength of soil cement mixture with cement content, 2 and 4 per cent, was lower than the strength of soil cement mixture without cement content by more than 40 to 50 per cent. 3. The strength of soil-cement molded with molding pressure, 100kg/$\textrm{cm}^2$, was higher than the strength of soil-cement molded with M.D.D. obtained from standard compaction test more than 40 per cent in sand loam cement and 50 per cent in loamy cement. 4. There was highly significant positive correlation among molding pressure, cement content and unconfined compressive strentgh and so the following multiple regression equations were obtained. Loam: fc=1.9693C+0.197P-0.84 Sandy loam: fc=2.9065C+0.235P-0.77 5. When the specimens were molded with molding pressure, 20 to 100kg/$\textrm{cm}^2$, the regression equation between the 28-day and 7-day strenght was obtained as follows. Loam : q28=1.1050q7+7.59(r=0.9147) Sandy loam : q28=1.3905q7+3.17 (r=0.9801) 6. At the cement contents of above 50 per cent, the weight losses by freeeze-thaw test were negligible. At the cement content of below 8 per cent the weight losses were singnificantly high under low molding pressure and remarkably decreased with the increase of molding pressure up to 80kg/$\textrm{cm}^2$. 7. Resistance to damage from water and to absorption of water were not improved by molding pressure alone, but when the soil was mixtured with cement above 6 per cent, damage seldoms occurred and absorbed less than 5 per cent of water. 8. There was highly significant inverse-corelationship between the compressive strength of soil cement mixtures and their freeze-thaw loss as well as water absorption. By the regression equation methods, the relationships between them were expessed as followed fc=-7.3206Wa+115.6(r=0.9871) log fc=-0.0174L+1.59(r=0.7709) where fc=unconfined compressive stregth after 28-days curing. kg/$\textrm{cm}^2$ Wa=water absorption, % L : freeze-thaw loss rate, %

• 청정기술
• /
• 제8권2호
• /
• pp.67-76
• /
• 2002

Dewatered sludge of 400,000t/y from water treatment plants in Korea is being disposed through landfill and ocean dumping. However, the disposal is posing more and more serious environmental problems at the same time not only because of landfill site shortage in municipal suburbs, but because of the concern it will contaminate the oceans. In this study, the research on utilizing the sludge dried by flash dryer as covering soil in the landfill sites was carried out to solve these problems on environmental affinity. Both dewatered and dried sludge were exposed to the natural condition and observed according to the atmospheric changes. An experiment of soil engineering characteristics of the dried sludge and tests on mixed sludge(silty sandy soil : dried sludge = 10:90 ~ 30:70) such as particle size distribution, liquid and plastic limit, moisture content, specific gravity and compaction test were carried out. According to the compaction test, the compaction was confirmed as the optimum water content ratio was observed in the condition of SM-silty sand of particle size distribution, NP of liquid and plastic limit, 101.4% of moisture content, 2.04~2.12 of specific gravity. The results showed that dried sludges mixed with at least 30% of natural soil could be used as daily covering soil in the landfill sites.

• 대한토목학회논문집
• /
• 제30권1C호
• /
• pp.53-63
• /
• 2010

함수특성곡선은 불포화지반의 거동을 분석하는데 있어서 매우 중요한 물성으로 활용되고 있으나 많은 경우 상재하중과 세립분의 영향을 고려하지 않은 상태에서 측정되어 적용해 왔다. 따라서 본 논문에서는 국내의 대표적인 풍화토를 대상으로 상재하중과 점토의 함유량에 따른 함수특성 영향을 살펴보았다. 상재하중, 세립분, 그리고 이력 조건을 고려하여 함수특성과 불포화 투수계수를 SWCC 시험결과를 토대로 평가하였다. 또한 불포화시 습윤용적과 확산능력에 대하여도 살펴보았다.

• The Korean Journal of Ecology
• /
• 제19권5호
• /
• pp.453-463
• /
• 1996

Diurnal changes of microclimatic conditions and tissue water relations were measured at two sites where Carpinus laxiflora and C. cordata were allopatrically distributed. The microclimatic conditions at a site where C. laxiflora was distributed produced severe water stress condition during summer months. Daily maximum temperature reached $30.4^\circC$ and the highest vapor pressure deficit was 1.31 KPa when 13 rainless days were continued. During this period soil water content decreased to below the field capacity even at a depth of 20 cm and xylem pressure potential also decreased to ­2.04 MPa. However, turgor potential was maintained more than 0.4 MPa. Patterns of stomatal conductance were changed with evaporative demand and soil water availability. On the other hand, microclimatic conditions at a site where C. cordata was distributed were moderate water strees condition compared with those at a site C. laxiflora was distributed. Though soil water content was maintained above field capacity C. cordata showed a remarkable decrease in turgor potential and stomatal conductance throughout the experiment. These results indicate that there is a difference in habitat characteristics between the two species and C. laxiflora is more resistant than C. cordata to water stress.

• Geomechanics and Engineering
• /
• 제8권5호
• /
• pp.687-706
• /
• 2015

Methods commonly used to evaluate the improvement of lime-treated expansive soil include swelling characteristics and unconfined compressive strength. In the field, lime-treated expansive soils are in compacted unsaturated state. Soil water characteristic curves (SWCCs) represent a key parameter to interpret and describe the behavior of unsaturated expansive soil. This paper investigates the use of SWCC as a technique to evaluate improvements acquired by expansive soil after lime treatment. Three different lime contents were considered 2%, 4% and 6% by dry weight of clay. Series of tests were performed to determine the SWCC for the different lime content under curing periods of 7 and 28 day. Correlations between key features of the soil water characteristic curves of lime treated expansive soils and basic engineering behavior such as swelling characteristics and unconfined compression strength were established. Test results revealed that initial slope ($S_1$), saturated water content ($w_{sat}$), and air entry value (AEV) play an important role in reflecting improvement in engineering behavior achieved by lime treatment.