• 한국해양공학회지
• /
• 제16권5호
• /
• pp.49-55
• /
• 2002

The compression anchor is characterized by decrement of progressive failure, simple site work, economy and durability compared with tension anchor. In this paper, compression anchor is analysed through the laboratory element tests. The formula to be estimate the grout strength in fixed part of compression anchor and the effective reinforcement method for several types of soil were suggested. The following conclusions were made from this study : (1) A formula, which is able to calculate the grout strength in the fixed part of the compression anchor, is suggested. (2) The strength increment ratios( $R_{si}$) are 100％, 132％, 147％, 217％ according to the reinforcement method of grout. The reinforcement method is Non, Outside spiral, Inside-Outside spiral, Steel pipe, respectively. (3) The strength increment ratios( $R_{si}$) by reinforcing can be 8.23 times the strength increment effect according to the reinforcement types and ground confining pressure. (4) The steel pipe reinforcement is most effective in decomposed soil while, in the case of hard rock ground, high confining pressure is exerted on the grout, so there is no need to use reinforcements.

• 한국농공학회논문집
• /
• 제53권4호
• /
• pp.21-27
• /
• 2011

Soil stress distribution under loading is one of the important problems in civil engineering. Many models have been proposed to interpret the stress distribution in soil and most models assume that the soil is homogeneous and isotropic. Therefore, the actual stress distribution may be different. In addition, With the increase of the top load, soil stress does not increase linearly. In this study, vertical stress changes in sandy soil according to top load increase were measured through experiments. Experimental results, vertical soil stress due to top load increase showed an initial nonlinear behavior and when the load increases to some extent, vertical soil stress showed a linear behavior. ${\alpha}$ value obtained by existing theories always 1.00. But, ${\alpha}$ value by experiment was observed from 0.91 to 1.22 and ${\alpha}$ value was increased with increasing distance from the loading plate.

• 한국농공학회지
• /
• 제18권4호
• /
• pp.4242-4250
• /
• 1976

The determination of the pre-consolidation load known to have a great effect on the consolidation characteristics of the soil have been researched and discussed in detail by many other researchers. A study was undertaken to investigate and compare the effect of pre-consolidation loads on the coefficient of permeability and the consolidation characterisics of soil through the consolidation test on the three types of soil samples. The results of this study are follows; 1. Large compression index is dependent on initial void ratio of the sample being used and the pressure-void ratio curve shows a curved linear relationship in over-consolidated area but a linear relationship in normally consolidated area.2. Settlement-time curve is S-shaped where the pressure is larger than pre-consolidation load and regardless of over-burden pressure, it is a similar straight line respectively in the secondary consolidation area. 3. Primary consolidation ratio of the sample increases almost linearly with the increase of over-burden pressure but the coefficient of volume compressibility decreases linearly with the increase of it. 4. Time factor of a certain degree of consolidation increases with over-burden pressure but the coefficient of consolidation decreases with it in over-consolidated area. There is a linear relationship between them in normally consolidated area. 5. The void ratio of completion point of primary consolidation decreases linearly with over-burden pressure. 6. The coefficient of permeability of sample decreases linearly with over-burden pressure in normally consolidated area, also it increases linearly with increment of the void ratio of the sample.

• Geomechanics and Engineering
• /
• 제35권6호
• /
• pp.593-601
• /
• 2023

In this paper, an analytical solution of large-strain cylindrical cavity expansion in compaction grouting problem under temperature field is given. Considering the stress increment caused by temperature, the analytical solution of cavity expansion under traditional isothermal conditions is improved by substituting the temperature stress increment into the cavity expansion analysis. Subsequently, combined with the first law of thermodynamics, the energy theory is also introduced into the cylindrical cavity expansion analysis, and the energy dissipation solution of cylindrical cavity expansion is derived. Finally, the validity and reliability of solution are proved by comparing the results of expansion pressure with those in published literatures. The results show that the dimensionless expansion pressure increases with the increase of temperature, and the thermal response increases with the increase of dilation angle. The higher the exothermic temperature of grouting slurry, the greater the plastic deformation energy of the surrounding soil, that is, the greater the influence on the surrounding soil deformation and the surrounding environment. The proposed solution not only enrich the theoretical system of cavity expansion, but also can be used as a theoretical tool for energy geotechnical engineering problems, such as CPT, nuclear waste disposal, energy pile and chemical grouting, etc.

• 한국농공학회논문집
• /
• 제54권6호
• /
• pp.77-87
• /
• 2012

Recently, Load and Resistance Factor Design (LRFD) based on reliability analysis has become a global trend for economical and rational design. In order to implement the LRFD, quantification of uncertainty for load and resistance should be done. The reliability of result relies on input variable, and therefore, it is important to obtain exact uncertainty properties of load and resistance. Since soil stress is the main reason causing the settlement or deformation of ground and load on the underground structure, it is essential to clarify the uncertainty of soil stress distribution for accurately predict the uncertainty of load in LRFD. In this study, laboratory model test on silty sand bed under probabilistic load is performed to observe propagation of upper load uncertainty. The results show that the coefficient of variation (COV) of soil stress are varied depending on location due to non-linear relationship between upper load increment and soil pressure increment. In addition, when the load uncertainty is transmitted through ground, COV is decreased by damping effect.

• 한국자동차공학회논문집
• /
• 제5권2호
• /
• pp.1-12
• /
• 1997

A computer program was developed to simulate effect of the initial track tension on the tractive performance of tracked vehicles. The performance was evaluated in terms of drawbar pull, motion resistance, tractive coefficient and tractive efficiency. Results of the simulation showed that increase in track tension decreases the sinkage and mean maximum pressure in clay, making the ground pressure distribution more uniform. This tendency became more evident when the number of roadwheels increased. However, such change in MMPs was negligible in firm soils. Motion resistance was also decreased with increase in track tension and the number of roadwheels. Under weak soil conditions, tractive coefficient and efficiency increased generally as the track tension increased for a slip range of 10∼30%. For slippage less than 3∼4%, however, the tractive coefficient decreased with increase in track tension. In general, it was known that increasing track tension improves tractive performance in weak soil conditions. However, high track tension can reduce efficiency due to the increment of internal motion resistance caused by increased track tension.

• Structural Engineering and Mechanics
• /
• 제33권1호
• /
• pp.67-77
• /
• 2009

The soil response calculation is described, by which, threw the fictive path of stress, the stress-deformation diagrams are determined, considering the nonlinear soil behavior. The calculation are lead incrementally, by which is shown that in the presented soil model (modified Cam Clay), considering the influence of overconsolidated soil pressure OCR, the number of calculation steps may, but not necessarily, have a sufficient influence on the value of failure load and definite soil deformation. The simplicity and the practicalness of the procedure, the enables modeling the complex relations in soil.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.1198-1209
• /
• 2009

In this study, an experimental research on the acceleration effect of dredged soil's self weight consolidation with seepage consolidation and PBD was conducted. The middle-sized consolidation equipment had been manufactured in order to investigate the acceleration of sedimentation and self-weight consolidation by PBD and a lower drainage. Seepage pressure was applied to the PBD installed in the center of the test equipment and a drainage by seepage pressure was allowed. The comparison between cases with and without PBD and seepage pressure reveals that the quantity of drained water and the amount of settlement was nearly 1.2 times to 3.68 times greater in the case with PBD and seepage. Early consolidation completion and the use of reclaimed site are expected due to the acceleration of settlement and increase of the quantity of reclamation if PBD is installed while being reclaiming using the result of the research.

• 한국지반공학회논문집
• /
• 제18권1호
• /
• pp.71-78
• /
• 2002

본 연구에서는 다층지반에 근입된 흙막이 벽의 단계별 계측변위로부터 각 층의 지반물성을 추정하고 이로부터 차기단계의 거동을 예측하기 위한 역해석 기법을 제안하였다. 지반이 다수의 층으로 구성되어 있을 경우 찾아야 할 대상변수가 많아지게 되며, 대상변수가 많아질수록 역해석에 상당한 무리가 따르게 된다. 이러한 층별 지반물성을 효율적으로 추정하기 위하여 최하단층부터 순차적으로 대상변수들을 찾아가는 방법을 이용하였다. 역해석은 상당량의 반복계산이 필요하기 때문에 정해석 방법으로는 해석시간이 짧고 시공단계 별 해석이 가능한 탄소성보법을 사용하였다. 역해석 대상변수는 탄소성 하중-변위 곡선의 구성요소인 지반반력계수와 수평토압계수들을 취하였으며, 목적함수는 이상변위에 의한 오차를 최소화시키기 위하여 단계별 계측변위 증분과 해석변위 증분의 차이로 구성하였다. 목적함수를 최소화 시키는 대상변수들을 찾기 위한 최적화 수법으로는 제약순차선형계획 법을 이용하였다. 본 연구를 통하여 제안된 방법을 수치해석자료 및 현장계측자료를 이용하여 검증하였다.

• 한국농림기상학회지
• /
• 제6권1호
• /
• pp.18-23
• /
• 2004

본 연구는 우리나라 중부지방의 소나무 천연 임분을 대상으로 입지환경별 생장 및 수분생리 특성을 파악하여 합리적인 경영방안을 제시하기 위하여 수행되었다. 연구 대상지의 소나무림은 평균 206.5㎥/ha을 나타냈으며, 각 방위별로 본수, 단면적, 재적 등의 임분 통계량을 보면 북사면에서 남사면으로 갈수록 증가하는 경향을 보이고 있지만 연년생장량과 10년 간의 정기평균 생장량은 반대로 남사면에서 가장 낮은 값을 나타내고 있다. 오후 12∼14시 사이에 측정된 최대 수분포텐셜(Ψ$_{w}$)을 각 방위 및 고도별로 구분하며 분석한 결과 소나무는 북사면에서 남사면으로 가면서 수분포텐셜이 낮아지는 경향을 보였으며, 고도별 수분포텐셜은 상부에서 하부로 가면서 증가하였다. 각 방위별 토양 수분함량은 북사면에서 남사면으로 가면서 감소하는 경향을 나타냈고, 토양 수분함량에 따른 소나무의 수분포텐셜은 고도의 음의 상관관계를 나타냈다. 따라서 연구 대상지의 소나무는 남사면과 능선에서 수분 요구도가 높은데, 이는 이곳에서의 많은 증발량에 따른 수분 결핍에 의한 종내 수분 경쟁의 결과로 판단된다..