• 제목/요약/키워드: soil modeling

검색결과 783건 처리시간 0.03초

교량 말뚝기초의 단부 지점조건의 영향분석 (Influence of Pile Cap's Boundary Conditions in Piled Pier Structures)

  • 정상섬;원진오
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2005년도 춘계 학술발표회 논문집
    • /
    • pp.25-32
    • /
    • 2005
  • Modeling techniques of piled pier were reviewed and the influences of pile cap's boundary conditions were analyzed in this study. Among various modeling techniques, equivalent cantilever method seems relatively simple for modeling pile groups and it has some problems to determine the virtual fixed points. Through the analyses, it was found that the method of nonlinear p-y model with soil springs was more appropriate than equivalent cantilever method. The method modeling a pile group using stiffness matrix seems useful for practical design, which can represent the nonlinear three-dimensional behavior of a piled pier. In this study, the stiffness matrix of a pile group could be estimated efficiently and precisely using three-dimensional nonlinear analysis programs of pile groups (FBPier 3.0, YSGroup).

  • PDF

Electrokinetic정화시 토질의 완충능을 고려한 시료내의 pH변화 (pH Variation In Soils Considering Buffer Capacity during Electrokinetic Extraction)

  • 오승록;한상재;김수삼;조성호
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.585-590
    • /
    • 2001
  • Physicochemical phenomena in soils are dependent upon pH when using electrokinetic extraction for the contaminants removal especially for heavy metals. pH variation in soils is affected on H$\^$+/ and OH ̄ ions produced by electrolysis reaction and buffer capacity of soil. High amount of heavy metals are retained in the soils if the soil buffer capacity remains high enough to resist a change in pH. Therefore, accurate pH estimation of soil is important in the application of electrokinetic mechanism for decontamination and understanding of subsurface physicochemical characteristics is also required as well as considering buffer capacity for the enhanced methods application. For these, buffer capacity and pH distribution were measured for the four soils, and also compared with modeling results. The results of buffer modeling were good agreement with experimental data. It is showed that four soils were effected by buffer capacity

  • PDF

굴삭기 작업장치부의 기하학적 동역학 모델링 및 궤적 제어에 관한 연구 (Geometric Modeling and Trajectory Control Design for an Excavator Mechanism)

  • 김성호;유승진;이교일
    • 유공압시스템학회논문집
    • /
    • 제4권2호
    • /
    • pp.1-6
    • /
    • 2007
  • During the last few decades, excavation automation has been investigated to protect the operator from the hazardous working environment and to relieve the cost of the skilled operator. Therefore, a number of modelling and controller design methods of the hydraulic excavator are proposed in many literatures to realize the excavation automation. In this article, a geometric approach far the multi-body system modeling is adopted to develop the excavator mechanism model that contains 4 kinematic loops and 12 links. Considering a simple soil mechanism model with a number of uncertain soil parameters, an adaptive trajectory tracking control strategy based on the developed excavator model is proposed. The improved performance of the designed controller over the simple PID controller is validated via the simulation study.

  • PDF

Static behavior of a laterally loaded guardrail post in sloping ground by LS-DYNA

  • Woo, Kwang S.;Lee, Dong W.;Yang, Seung H.;Ahn, Jae S.
    • Geomechanics and Engineering
    • /
    • 제15권5호
    • /
    • pp.1101-1111
    • /
    • 2018
  • This study aims to present accurate soil modeling and validation of a single roadside guardrail post as well as a single concrete pile installed near cut slopes or compacted sloping embankment. The conventional Winkler's elastic spring model and p-y curve approach for horizontal ground cannot directly be applied to sloping ground where ultimate soil resistance is significantly dependent on ground inclination. In this study, both grid-based 3-D FE model and particle-based SPH (smoothed particle hydrodynamics) model available in LS-DYNA have been adopted to predict the static behavior of a laterally loaded guardrail post. The SPH model has potential to eliminate any artificial soil stiffness due to the deterioration of the node-connected Lagrangian soil mesh. For this purpose, this study comprises two parts. Firstly, only 3-D FE modeling has been tested to show the numerical validity for a single concrete pile in sloping ground using Mohr-Coulomb material. However, this material option cannot be implemented for SPH elements. Nevertheless, Mohr-Coulomb model has been used since this material model requires six input soil data that can be obtained from the comparative papers in literatures. Secondly, this work is extended to compute the lateral resistance of a guardrail post located near the slope using the hybrid approach that combines Lagrange FE elements and SPH elements by the suitable node-merging option provided by LS-DYNA. For this analysis, the FHWA soil material developed for application to road-base soils has been used and also allows the application of SPH element.

원심모형실험에서 관측된 건조 지반-말뚝 동적 상호작용의 수치 모델링 (Numerical Simulation of Dynamic Soil-pile Interaction for Dry Condition Observed in Centrifuge Test)

  • 권선용;김석중;유민택
    • 한국지반공학회논문집
    • /
    • 제32권4호
    • /
    • pp.5-14
    • /
    • 2016
  • 건조토 지반에 근입된 지반-말뚝 시스템의 동적 거동을 정확히 예측하기 위해 3차원 수치 모델링을 수행하였다. 제안된 모델은 강진 시 지반의 비선형 거동을 적절하게 모사하기 위해 상용 유한 차분 프로그램인 FLAC3D를 이용하여 시간 영역에서 해석이 수행되었다. 모델링 방법론으로써 지반 구성 모델은 Mohr-Coulomb 탄소성 모델을 적용하였으며 지반 전단 탄성 계수의 비선형적인 감소를 모사할 수 있는 이력 감쇠 모델을 적용하였다. 진동 시 지반-말뚝 간의 완전 접촉, 미끄러짐, 분리 현상을 모두 모사하는 경계요소 모델을 적용하였으며 경계요소 모델을 구성하는 스프링 계수는 탄성이론에 기초하여 결정되어, 내장 함수인 FISH를 통해 깊이에 따라 연속적으로 입력되었다. 경계 조건의 경우, 지반-말뚝 상호작용의 영향을 받는 근역 지반만 메쉬를 생성하고 근역 지반의 경계부에 원역 지반의 가속도-시간 이력을 입력하는 방식인 단순화 연속체 모델링 기법(Kim et al., 2012)을 적용함으로써 해석 효율을 증가 시키고자 하였으며 적절한 최대지반탄성계수와 항복 깊이의 설정으로 지반의 비선형 거동을 더욱 정확히 모사하고자 하였다. 수치 해석의 오차를 최소화하고 모델의 신뢰성을 확보하기 위해, Yoo(2013)이 수행한 원심모형시험 결과와 수치 해석 결과와의 비교를 통해 제안된 기법의 캘리브레이션을 수행하였으며, 말뚝 최대 휨 모멘트와 말뚝 횡방향 최대 변위의 깊이 별 분포가 다양한 입력 하중 조건에서 실험 결과를 적절히 모사하고 있는 것을 확인하였다. 또한, 제안된 수치 모델의 적용성 평가를 위해 다른 실험 결과와의 비교 검증을 수행하였다.

Reviewing the Applications of Three Countries' Ground Water Flow Modeling Regulatory Guidelines to Nuclear Facilities in Korea

  • Lee, Chung-Mo;Hamm, Se-Yeong;Hyun, Seung Gyu;Cheong, Jae-Yeol;Wei, Ming Liang
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제22권3호
    • /
    • pp.1-9
    • /
    • 2017
  • The numerical analysis of groundwater flow is indispensable for predicting problems associated with water resource development, civil works, environmental hazards, and nuclear power plant construction. Korea lacks public regulatory procedures and guidelines for groundwater flow modeling, especially in nuclear facility sites, which makes adequate evaluation difficult. Feasible step-by-step guidelines are also unavailable. Consequently, reports on groundwater flow modeling have low-grade quality and often present controversial opinions. Additionally, without public guidelines, maintaining consistency in reviewing reports and enforcing laws is more challenging. In this study, the guidelines for groundwater flow modeling were reviewed for three countries - the United States (Documenting Groundwater Modeling at Sites Contaminated with Radioactive Substances), Canada (Guidelines for Groundwater Modelling to Assess Impacts of Proposed Natural Resource Development Activities), and Australia (Australian Groundwater Modelling Guidelines), with the aim of developing groundwater flow modeling regulatory guidelines that can be applied to nuclear facilities in Korea, in accordance with the Groundwater Act, Environmental Impact Assessment Act, and the Nuclear Safety Act.

Probabilistic seismic assessment of structures considering soil uncertainties

  • Hamidpour, Sara;Soltani, Masoud;Shabdin, Mojtaba
    • Earthquakes and Structures
    • /
    • 제12권2호
    • /
    • pp.165-175
    • /
    • 2017
  • This paper studies soil properties uncertainty and its implementation in the seismic response evaluation of structures. For this, response sensitivity of two 4- and 12-story RC shear walls to the soil properties uncertainty by considering soil structure interaction (SSI) effects is investigated. Beam on Nonlinear Winkler Foundation (BNWF) model is used for shallow foundation modeling and the uncertainty of soil properties is expanded to the foundation stiffness and strength parameters variability. Monte Carlo (MC) simulation technique is employed for probabilistic evaluations. By investigating the probabilistic evaluation results it's observed that as the soil and foundation become stiffer, the soil uncertainty is found to be less important in influencing the response variability. On the other hand, the soil uncertainty becomes more important as the foundation-structure system is expected to experience nonlinear behavior to more sever degree. Since full This paper studies soil properties uncertainty and its implementation in the seismic response evaluation of structures. For this, response sensitivity of two 4- and 12-story RC shear walls to the soil properties uncertainty by considering soil structure interaction (SSI) effects is investigated. Beam on Nonlinear Winkler Foundation (BNWF) model is used for shallow foundation modeling and the uncertainty of soil properties is expanded to the foundation stiffness and strength parameters variability. Monte Carlo (MC) simulation technique is employed for probabilistic evaluations. By investigating the probabilistic evaluation results it's observed that as the soil and foundation become stiffer, the soil uncertainty is found to be less important in influencing the response variability. On the other hand, the soil uncertainty becomes more important as the foundation-structure system is expected to experience nonlinear behavior to more sever degree. Since full probabilistic analysis methods like MC commonly are very time consuming, the feasibility of simple approximate methods' application including First Order Second Moment (FOSM) method and ASCE41 proposed approach for the soil uncertainty considerations is investigated. By comparing the results of the approximate methods with the results obtained from MC, it's observed that the results of both FOSM and ASCE41 methods are in good agreement with the results of MC simulation technique and they show acceptable accuracy in predicting the response variability.

토목섬유로 보강된 다짐토 공시체의 구속효과 관한 연구 (A Study on the Confining Effect Due to Geosynthetics Wrapping Compacted Soil Specimen)

  • Kim, Eun Ra;Iizuka, Atsushi;Kim, You-Seong;Park, Hong
    • 한국지반공학회논문집
    • /
    • 제20권5호
    • /
    • pp.5-16
    • /
    • 2004
  • 본 연구에서는 토목섬유로 보강된 다짐토의 보강 메카니즘이 제시되며, 이러한 보강 메카니즘은 다짐토의 체적팽창(부의 다일러탄시)을 토목섬유에 의해 구속 억제하는 과정에서 생성되는 효과로 간주된다. 먼저, 실내실험을 위한 구체적인 방법으로서, 토목섬유의 보강효과를 정량적으로 파악하기 위하여 사질토를 다짐하여 공시체를 만들어 그 주위에 토목섬유를 설치한 후 전체적으로 압축전단시험을 실시하였다. 실험에서 초기 다짐도는 각각의 종류에 대하여 다일러탄시의 특성이 다르기 때문에 각각의 공시체에 대하여 변화시켰다. 여기서 전단시험 도중에 다짐토의 다일러탄시 변형을 방지하기 위한 토목섬유에 작용하는 축방향 힘들(axial forces)이 조사되었다. 또한 다짐토의 탄소성 모델과 이러한 모델에 필요한 초기 입력치 값의 결정 방법들이 제시된다. 마지막으로, 탄소성 구성 모델에서 항복 이전의 탄성 영역의 거동을 모사하기 위하여 Hashiguch(1989)가 제안한 subloading surface의 개념을 도입하여, 유한요소(FEM) 해석을 통해 얻어진 결과들을 실내시험의 결과와 비교 분석하였다.

토목섬유로 보강된 다짐토 공시체의 구속효과에 관한 수치계산 (Numerical Analysis of Confining Effect Due to Geosynthetics Wrapping Compacted Soil Specimen)

  • Kim, Eun-Ra;Kang, Ho-Keun
    • 한국지반공학회논문집
    • /
    • 제20권2호
    • /
    • pp.37-46
    • /
    • 2004
  • 본 연구에서는 토목섬유로 보강된 다짐토의 메카니즘이 제시되며, 이러한 메카니즘은 다짐토의 체적팽창(다일러턴시)을 토목섬유에 의해 구속 억제하는 과정에서 생성되는 효과로 간주된다. 먼저, 실내실험을 위한 구체적인 방법으로서, 토목섬유의 보강효과를 정량적으로 파악하기 위하여 사질토를 다짐하여 공시체를 만들어 그 주위에 토목섬유를 설치한 후 전체적으로 압축전단시험을 실시하였다. 실험에서 초기 다짐도는 각각의 종류에 대하여 다일러턴시의 특성이 다르기 때문에 각각의 공시체에 대하여 변화시켰다. 여기서 전단시험 도중에 다짐토의 다일러턴시 변형을 방지하기 위한 토목섬유에 작용하는 축방향 힘들(axial farces)이 조사되었다. 또한 다짐토의 탄소성 모델과 이러한 모델에 필요한 초기 입력치 값의 결정 방법들이 제시된다. 마지막으로, 탄소성 구성 모델에서 항복 이전의 탄성영역의 거동을 모사하기 위하여 Hashiguch(1989)가 제안한 subloading surface의 개념을 도입하여, 유한요소(FEM)해석을 통해 얻어진 결과들을 실내시험의 결과와 비교 분석하였다.

Comparative analysis for the corrosion susceptibility of copper alloys in sandy soil

  • Galai, Mouhsine;Benqlilou, Hanane;Touhami, Mohamed Ebn;Belhaj, Tounsi;Berrami, Khalifa;El Kafssaoui, Hassan
    • Environmental Engineering Research
    • /
    • 제23권2호
    • /
    • pp.164-174
    • /
    • 2018
  • Corrosion of copper alloys (copper, bronze and brass) in soil was evaluated at ambient temperature using various methods such as electrochemical impedance spectroscopy (EIS), polarization curves and Scanning Electron Microscopy (SEM) coupled with Energy Dispersive Spectroscopy microanalysis measurements. Three equivalent circuits were separately used to interpret the obtained impedance spectra. The EIS measurements indicated that the polarization resistance of all electrodes increases with increasing the immersion time. SEM showed a presence of three layers of corrosion products with various composition and morphology covering each electrode. In addition, it was found that at 20% of moisture content the $R_p$ values and the current density of all electrodes in the studied soil give the following order: copper > bronze > brass. Good consistency between the data obtained from EIS and PP measurements was observed.