• 전산구조공학
• /
• 제10권2호
• /
• pp.243-254
• /
• 1997

기초 지반상에 존재하는 3차원 골조구조물에 진동을 유발시키는 기계하중, 풍하중, 지진과 같은 동적 하중이 작용한다면, 지반-골조구조물 상호작용계의 동적거동을 해석하여야한다. 따라서, 본 연구에서는 실제 구조물에 근접한 기하학적 형상으로 이상화 시키기 위해, 슬래브와 기초판은 유연성을 갖는 4-절점 판요소, 보.기둥은 2-절점 보요소, 탄성지반은 8-절점 입체요소를 사용하여 유한요소법으로 3차원 상호작용계를 해석하였다. 본 연구의 목적은 지반-골조구조물 상호작용계의 동적 거동을 해석하기 위해, 동적 운동 방정식을 정리한 후 유한요소 프로그램으로 상호작용계의 동적 거동을 해석하는 것이다.

• 한국전산구조공학회논문집
• /
• 제37권2호
• /
• pp.133-141
• /
• 2024

유체-구조물-지반 상호작용을 고려한 액체저장탱크의 유한요소 모형을 제시하고, 비선형 지진응답 해석기법을 정식화한다. 탱크 구조물은 기하 및 재료 비선형 거동을 고려할 수 있는 쉘 요소로 모델링한다. 유체의 거동은 acoustic 요소로 구현하고, interface 요소를 사용하여 구조물과 결합한다. 지반-구조물 상호작용을 고려하기 위해 지반의 근역과 원역을 각각 solid 요소와 perfectly matched discrete layer로 모델링한다. 예제 20만 kl급 액체저장탱크의 지진취약도 해석에 적용하여, 유연한 지반에 구조물이 놓인 경우 부지에서의 암반노두운동의 증폭 및 필터링으로 인해 지진취약도의 중앙값과 대수 표준편차가 감소하는 것을 관찰할 수 있다.

• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.294-302
• /
• 2018

간극수압을 받는 지반보의 응력-변형률 거동 분석을 위해 해석해와 유한요소해석결과를 정량적으로 상호 비교해 보았다. 유한요소해석을 통해 얻은 수평응력은 해석해에 의한 결과와는 달리 지반보의 수평축에 대하여 대칭성을 보이지 않았으나 요소의 개수가 증가함에 따라 대칭에 가까운 형태를 보였다. 해석해에 의한 수평응력을 유한요소의 가우스점에 대하여 얻은 수평응력과 비교해 볼 때 3개의 요소를 고려한 유한요소해석을 통해 얻은 인장응력의 값은 해석해에 의한 최대 인장응력값의 6% 였고 압축응력의 값은 해석해에 의한 최대값의 37% 였다. 6개의 요소를 고려한 유한요소해석을 통해 얻은 인장응력의 값은 해석해를 통해 얻은 최대값의 61% 였고 압축응력의 값은 해석해를 통해 얻은 최대값의 83% 였다. 지반보 내에 발생되는 연직응력은 해석해에 의할 경우 보의 깊이에 따라 연속적인 분포양상을 보인다. 유한요소해석에 의한 연직응력은 유한요소를 구성하는 요소에 따라 이산적인 분포를 보이는데 요소내의 4개의 가우스점에 대하여 얻은 평균 연직응력은 지반보에 작용하는 간극수압의 크기에 가까운 값을 보였다. 지반보의 중앙 근처에서의 연직변위량을 비교해 볼 때 3개의 요소로 구성된 지반보에 대한 유한요소해석을 통해 얻은 값은 해석해에 의한 값의 35% 였으며 6개의 요소로 구성된 지반보에 대한 유한요소해석을 통해 얻은 값은 해석해에 의한 값의 57% 였다.

• Geomechanics and Engineering
• /
• 제12권2호
• /
• pp.239-255
• /
• 2017

Various centrifuge model tests on the pile foundations were performed to investigate fundamental characteristics of a pile-soil-foundation system recently, but it is hard to find numerical analysis results of a pile foundation system considering the nonlinear behavior of soil layers due to the dynamic excitations. Numerical analyses for a pile-soil system were carried out to verify the experimental results of centrifuge model tests. Centrifuge model tests were performed at the laboratory applying 1.5 Hz sinusoidal base input motions, and nonlinear numerical analyses were performed utilizing a finite element program of P3DASS in the frequency domain and applying the same input motions with the intensities of 0.05 g~0.38 g. Nonlinear soil properties of soil elements were defined by Ramberg-Osgood soil model for the nonlinear dynamic analyses. Nonlinear numerical analyses with the P3DASS program were helpful to predict the trend of experimental responses of a centrifuge model efficiently, even though there were some difficulties in processing analytical results and to find out unintended deficits in measured experimental data. Also nonlinear soil properties of elements in the system can be estimated adequately using an analytical program to compare them with experimental results.

• 한국환경과학회지
• /
• 제30권1호
• /
• pp.87-96
• /
• 2021

Herb has been categorized as a special plants from the beginning of human history and used in different medical systems in different cultures. This research has classified soil into 6 kinds that have diverse elements to see to which various kinds of savory(satureja hortensis) adapt well, experimenting from sowing to flowering for around 13 weeks, and also divided indoor conditions to get the result below. In conclusion, growth status of savory depending on the kinds of soil suggest that in indoor conditions the savory if planted in ⑤ bed soil compounded with saprolite and poultry manure grew better than any other condition. On the other hand, the growth status was bad in ① masato, ② clay, ④ bed soil mixed with saprolite, and ⑥ bed soil mixed with clay conditions. Though you can see the immediate effect of soil on the growth of savory, I'd like to reveal the details of how elements of savory operate in which kind of soil and outdoor conditions the goal of this research, in the next research.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.985-994
• /
• 2004

The application of the reinforced retaining wall has increased in the last 10 years in Korea. The height of reinforced wall is generally limited to less than 15m. It has been reported that the reinforced wall higher than 10m should have higher strength reinforcement or should reduce the lateral earth pressure of the reinforced wall to secure the stability of the wall. In this study, the reinforced retaining wall was constructed 14m high, backfilled by a mixture of soil and cement and instrumented on the reinforcement elements. The instrumented reinforced wall was monitored during and after construction. Field monitoring result shows that a backfill by a mixture of soil and cement reduced the tensile stress developed on the reinforcing elements and the reinforced wall backfilled by a mixture of soil and cement performed successful.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.117-123
• /
• 2000

Using the modified DEM (Discrete Element Method), which we proposed in order to improve the accuracy of the simulation, soil behavior and reaction by lugs of rotating wheel and a soil cutting process by a high speed blade were calculated and compared with experimental data. The DEM is one of computational mechanics, where the object body is supposed as an assembly of small particles called elements and not a continuum as in the case of FEM. We can easily treat some discrete phenomena such as cracking, separating and sliding by the DEM. We had to modify the original mechanical model, which induced too free movement of elements, adding a tension spring, which would display the role of soil adhesion. The results of DEM simulations were successful from both the soil behavior and reaction points of view.

• Geomechanics and Engineering
• /
• 제15권5호
• /
• pp.1101-1111
• /
• 2018

This study aims to present accurate soil modeling and validation of a single roadside guardrail post as well as a single concrete pile installed near cut slopes or compacted sloping embankment. The conventional Winkler's elastic spring model and p-y curve approach for horizontal ground cannot directly be applied to sloping ground where ultimate soil resistance is significantly dependent on ground inclination. In this study, both grid-based 3-D FE model and particle-based SPH (smoothed particle hydrodynamics) model available in LS-DYNA have been adopted to predict the static behavior of a laterally loaded guardrail post. The SPH model has potential to eliminate any artificial soil stiffness due to the deterioration of the node-connected Lagrangian soil mesh. For this purpose, this study comprises two parts. Firstly, only 3-D FE modeling has been tested to show the numerical validity for a single concrete pile in sloping ground using Mohr-Coulomb material. However, this material option cannot be implemented for SPH elements. Nevertheless, Mohr-Coulomb model has been used since this material model requires six input soil data that can be obtained from the comparative papers in literatures. Secondly, this work is extended to compute the lateral resistance of a guardrail post located near the slope using the hybrid approach that combines Lagrange FE elements and SPH elements by the suitable node-merging option provided by LS-DYNA. For this analysis, the FHWA soil material developed for application to road-base soils has been used and also allows the application of SPH element.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.17-19
• /
• 2005

This study is for geochemical relationships between ginseng and soil from three representative soil types from Keumsan, shale, phyllite and granite. In the weathered soils(avg.), shale area is high in the most of element, but low in the granite area. In the field soils(avg.), the shale area is mainly high, but low in the granite area and comparing with ages, most of elements are high in the 2 year soils, but low in the 4 year soils. In the host rocks(avg.), high average element contents are shown in the phyllite and shale areas. In the ginsengs, differences of the element contents with ages are not clear, but show high element contents in the 2 year ginsengs of the shale and phyllite areas, and low contents in the 4 year ginsengs of the granite area. In the relative ratios(weathered soil/field soil), most of elements from the shale area are high, above 1, suggesting high element contents in the weathered soils of the shale area relative to the granite and phyllite areas. In the relative ratios(weathered soil/host rock), most of elements Ewe above 1, suggesting the high element contents in the weathered soils relative to the host rocks. Relative ratios (soil/ginseng) of the element contents are generally several times to ten times. Among the ginsengs of different ages with the same area, the relative ratios are small in the Cu and Zn contents. Regardless of the areas, big differences of the relative ratios are found in the Co and small differences are in the Cu and Zn, which suggest that differences between soils and ginsengs are big in the Co contents and small in the Cu and Zn contents. Regardless of the ages, differences among relative ratios are small in granite area relative to the shale. area, which suggest more similarity of the granite soils with ginsengsrelativetotheshalearea.

• 한국지진공학회논문집
• /
• 제19권1호
• /
• pp.37-43
• /
• 2015

This paper presents a detailed procedure for a nonlinear soil-structure interaction of a seismically isolated NPP(Nuclear Power Plant) structure using the boundary reaction method (BRM). The BRM offers a two-step method as follows: (1) the calculation of boundary reaction forces in the frequency domain on an interface of linear and nonlinear regions, (2) solving the wave radiation problem subjected to the boundary reaction forces in the time domain. For the purpose of calculating the boundary reaction forces at the base of the isolator, the KIESSI-3D program is employed in this study to solve soil-foundation interaction problem subjected to vertically incident seismic waves. Wave radiation analysis is also employed, in which the nonlinear structure and the linear soil region are modeled by finite elements and energy absorbing elements on the outer model boundary using a general purpose nonlinear FE program. In this study, the MIDAS/Civil program is employed for modeling the wave radiation problem. In order to absorb the outgoing elastic waves to the unbounded soil region, spring and viscous-damper elements are used at the outer FE boundary. The BRM technique utilizing KIESSI-3D and MIDAS/Civil programs is verified using a linear soil-structure analysis problem. Finally the method is applied to nonlinear seismic analysis of a base-isolated NPP structure. The results show that BRM can effectively be applied to nonlinear soil-structure interaction problems.