• 제목/요약/키워드: soil effect

검색결과 6,276건 처리시간 0.03초

S-Nitrosoglutathione (GSNO) Alleviates Lead Toxicity in Soybean by Modulating ROS, Antioxidants and Metal Related Transcripts

  • Methela Nusrat Jahan;Islam Mohammad Shafiqul;Da-Sol Lee;Youn-Ji Woo;Bong-Gyu Mun;Byung-Wook Yun
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2023년도 춘계학술대회
    • /
    • pp.105-105
    • /
    • 2023
  • Heavy metals, including lead (Pb) toxicity, are increasing in soil and are considered toxic in small amounts. Pb contamination is mainly caused by industrialization - smelting, mining. Agricultural practices - sewage sludge, pests and urban practices - lead paint. It can seriously damage and threaten crop growth. Pb can adversely affect plant growth and development by affecting the photosystem, cell membrane integrity, and excessive production of reactive oxygen species (ROS) such as hydrogen peroxide (H2O2)andsuperoxide(O2.-). NO is produced via enzymatic and non-enzymatic antioxidants to scavenge ROS and lipid peroxidation substrates in terms of protecting cells from oxidative damage. Thus, NO improves ion homeostasis and confers resistance to metal stress. Our results here suggest that exogenous NO may aid in better growth under lead stress. These enhancements may be aided by NO's ability in sensing, signaling and stress tolerance in plants under heavy metal stress in combination with lead stress. Our results show that GSNO has a positive effect on soybean seedling growth in response to axillary pressure and that NO supplementation helps to reduce chlorophyll maturation and relative water content in leaves and roots following strong burst under lead stress. GSNO supplementation (200 µM and 100 µM) reduced compaction and approximated oxidative damage of MDA, proline and H2O2. Under plant tension, a distorted appearance was found in the relief of oxidative damage by ROS scavenging by GSNO application. In summary, modulation of these NO, PCS and prolongation of metal past reversing GSNO application confirms the detoxification of ROS induced by toxic metal rates in soybean. In summary, these NO, PCS and metal traditionally sustained rates of reverse GSNO application confirm the detoxification of ROS induced by toxic metal rates in soybean.

  • PDF

풍하중이 경사지 태양광 발전시설의 기초 안정성에 미치는 영향 분석 (Effect of Wind Load on Pile Foundation Stability in Solar Power Facilities on Slopes)

  • 우종원;유정연;송기일
    • 한국지반공학회논문집
    • /
    • 제39권12호
    • /
    • pp.47-60
    • /
    • 2023
  • 현재 국내에 경사지에 설치된 태양광 발전시설에 대해서 강우 혹은 태풍과 같은 자연재해로 매년 태양광 발전시설의 강우에 의해 토사가 유출되어 기초부에 손상을 입거나, 풍하중에 의해 기초부가 이탈하는 등 피해사례가 발생하여 이와 관련된 문제가 대두되고 있다. 하지만 위와 같은 실정에도 지반과 구조물의 상호작용은 고려하지 않고, 외부 하중에 따른 구조물 자체의 안정성만 분석을 시행하며, 설비 부지의 안정성 검토는 태양광 구조물을 제외한 사면에 대한 안정성 검토만 진행중이다. 따라서 본 논문에서는 각 영향인자에 대해서 말뚝의 횡방향변위와 휨응력, 경사지의 안전율의 변화양상을 검토하기 위해 지반과 말뚝의 거동을 모사할 수 있는 유한차분법 해석을 실시하였다. 영향인자는 말뚝의 지름, 말뚝 사이의 간격, 말뚝의 근입 깊이, 풍하중, 건기와 우기 조건 등의 인자를 가정하였으며, 횡방향 변위와 휨응력, 경사지의 안전율에 큰 영향을 미치는 인자를 검토하였다. 말뚝의 횡방향 변위와 휨응력은 말뚝 사이의 간격과 풍하중에 큰 영향을 받는 것으로 나타나았으며, 경사지의 안전율의 경우 말뚝의 근입 깊이에 큰 영향을 받는 것으로 나타났다. 또한 해석을 실시한 조건에서 일부분은 국내의 설계기준을 만족하지 못하는 것으로 검토되었다.

전력구 터널 건설안전 확보를 위한 디스크커터 마모측정시스템 시작품 개발 및 성능검증 (Development of disc cutter wear sensor prototype and its verification for ensuring construction safety of utility cable tunnels)

  • 김정주;류희환;송승우;도승철;이지윤;정호영
    • 한국터널지하공간학회 논문집
    • /
    • 제26권2호
    • /
    • pp.91-111
    • /
    • 2024
  • 전력구 터널은 송전선로 지중화 사업의 일환으로 대부분의 경우 쉴드 TBM을 활용하여 건설된다. TBM 챔버는 터널 내부 중 유일하게 암반과 흙을 마주하는 공간이며, 붕락과 부딪힘 사고 등 사고노출 빈도가 가장 높은 곳이다. 현재 챔버 외부에서 디스크커터 마모정도를 측정할 수 있는 방법이 부재하기 때문에 근로자의 수시점검이 필수적이다. 이에 본 연구에서는 TBM 챔버 내부 안전사고를 예방하고, 챔버 오픈회수 절감을 통해 공사기간 단축의 효과를 기대하기 위하여 디스크커터 마모측정 기술 개념을 정립하고, 시작품을 제작하였다. 선행기술을 고찰하여 자기센서가 굴착환경에서 가장 적합하다고 판단하여, 자기센서, 무선통신 모듈, 전원공급, 외부 케이싱, 그리고 모니터링 시스템을 종합한 마모측정 센서 패키지를 개발하였다. 실제 굴착환경에서 시작품 성능검증을 수행하기 위해 3.6 m 토압식 쉴드 TBM을 활용한 실대형 굴진시험을 수행하였다. 실대형 굴진시험 결과 8개의 시작품 중 5개가 정상적으로 작동하였다. 최대 3,000 kN의 추력과 1.5 RPM의 회전속도 안에서 센서측정값이 무선통신을 통해 시스템에 원활하게 표출되는지 확인하였고, 센서 케이싱이 파손되지 않아 내구성을 확보하는 것으로 분석되었다.

지하 터널 건설을 위한 굴착 시 지하수 유동 분석 (Groundwater Flow Analysis During Excavation for Underground Tunnel Construction)

  • 이성열;백원진;김진영;정창성;강재모
    • 한국지반환경공학회 논문집
    • /
    • 제25권6호
    • /
    • pp.19-24
    • /
    • 2024
  • 도심지의 인구 밀집화로 인해 인구의 분산 및 이동을 위해 지하철도 및 지하 터널의 개발과 같은 지하공간에 대한 개발이 이루어지고 있다. 지하공간을 개발하기 위해서는 지반 상부로부터 굴착이 진행되어야 하며, 굴착 시 주변 지하수 유동이 발생할 수 있다. 지하수의 유동은 지반의 침하 및 함몰을 야기하여 구조물의 손상을 발생시킬 수 있다. 따라서 시공 전 지하수 유동을 모델링하여 지하수 유동 특성을 분석하고 굴착 시 발생하는 지하수 유출을 예측하여 대비해야 한다. 본 연구에서는 지하터널 건설을 위한 굴착공사가 이루어지는 ○○시를 대상으로 기상 및 지형, 지반 조건 등을 수집하여 Visual MODFLOW 프로그램을 통해 지하수 유동을 모델링하였다. 또한, 모델을 통해 굴착구간을 배수 지점으로 설정하여 굴착 공정에 따른 지하수 유출을 확인하였으며, 차수 조건에 따른 지하수 유출 감소 효과를 확인하였다. 실측 지하수위와 모델의 지하수위를 비교하여 모델을 검증한 결과, 0.87의 결정계수가 도출되었으며, 해당 모델을 통해 대상지역 굴착 공정에 따른 지하수 유동을 비교하였다. 그 결과, 굴착 초기에 지하수 유출이 가장 많이 발생하는 것으로 나타났다. 또한, 차수 유무에 따른 지하수 유출 저감 효과를 확인한 결과, 차수 구조물 설치 시 약 59%의 지하수 유출 저감 효과를 보이는 것으로 나타났다.

산업관련표(産業關聯表)에 의(依)한 임업구조분석(林業構造分析)과 유발생산액(誘發生産額) -임업(林業)이 한국경제(韓國經濟)에 미치는 영향(影響)- (Analysis of Forestry Structure and Induced Output Based on Input - output Table - Influences of Forestry Production on Korean Economy -)

  • 이승윤
    • Journal of the Korean Wood Science and Technology
    • /
    • 제2권4호
    • /
    • pp.4-14
    • /
    • 1974
  • The total forest land area in Korea accounts for some 67 percent of the nation's land total. Its productivity, however, is very low. Consequently, forest production accounts for only about 2 percent of the gross national product and a minor proportion of no more than about 5 percent versus primary industry. In this case, however, only the direct income from forestry is taken into account, making no reference to the forestry output induced by other industrial sectors. The value added Or the induced forestry output in manufacturing the primary wood products into higher quality products, makes a larger contribution to the economy than direct contribution. So, this author has tried to analyze the structure of forestry and compute the repercussion effect and the induced output of primary forest products when utilized by other industries for their raw materials, Hsing the input-output table and attached tables for 1963 and 1966 issued by the Bank of Korea. 1. Analysis of forestry structure A. Changes in total output Durng the nine-year period, 1961-1969, the real gross national product in Korea increased 2.1 times, while that of primary industries went up about 1. 4 times. Forestry which was valued at 9,380 million won in 1961, was picked up about 2. 1 times to 20, 120 million won in 1969. The rate of the forestry income in the GNP, accordingly, was no more than 1.5 percent both in 1961 and 1962, whereas its rate in primary industries increased 3.5 to 5.4 percent. Such increase in forestry income is attributable to increased forest production and rise in timber prices. The rate of forestry income, nonetheless, was on the decrease on a gradual basis. B. Changes in input coefficient The input coefficient which indicates the inputs of the forest products into other sectors were up in general in 1966 over 1963. It is noted that the input coefficient indicating the amount of forest products supplied to such industries closely related with forestry as lumber and plywood, and wood products and furniture, showed a downward trend for the period 1963-1966. On the other hand, the forest input into other sectors was generally on the increase. Meanwhile, the input coefficient representing the yolume of the forest products supplied to the forestry sector itself showed an upward tendency, which meant more and more decrease in input from other sectors. Generally speaking, in direct proportion to the higher input coefficient in any industrial sector, the reinput coefficient which denotes the use of its products by the same sector becomes higher and higher. C. Changes in ratio of intermediate input The intermediate input ratio showing the dependency on raw materials went up to 15.43 percent m 1966 from 11. 37 percent in 1963. The dependency of forestry on raw materials was no more than 15.43 percent, accounting for a high 83.57 percent of value added. If the intermediate input ratio increases in any given sector, the input coefficient which represents the fe-use of its products by the same sector becomes large. D. Changes in the ratio of intermediate demand The ratio of the intermediate demand represents the characteristics of the intermediary production in each industry, the intermediate demand ratio in forestry which accunted for 69.7 percent in 1963 went up to 75.2 percent in 1966. In other words, forestry is a remarkable industry in that there is characteristics of the intermediary production. E. Changes in import coefficient The import coefficient which denotes the relation between the production activities and imports, recorded at 4.4 percent in 1963, decreased to 2.4 percent in 1966. The ratio of import to total output is not so high. F. Changes in market composition of imported goods One of the major imported goods in the forestry sector is lumber. The import value increased by 60 percent to 667 million won in 1966 from 407 million won in 1963. The sales of imported forest products to two major outlets-lumber and plywood, and wood products and furniture-increased to 343 million won and 31 million won in 1966 from 240million won and 30 million won in 1963 respectively. On the other hand, imported goods valued at 66 million won were sold to the paper products sector in 1963; however, no supply to this sector was recorded in 1963. Besides these major markets, primary industries such as the fishery, coal and agriculture sectors purchase materials from forestry. 2. Analysis of repercussion effect on production The repercussion effect of final demand in any given sector upon the expansion of the production of other sectors was analyzed, using the inverse matrix coefficient tables attached to the the I.O. Table. A. Changes in intra-sector transaction value of inverse matrix coefficient. The intra-sector transaction value of an inverse matrix coefficient represents the extent of an induced increase in the production of self-support products of the same sector, when it is generated directly and indirectly by one unit of final demand in any given sector. The intra-sector transaction value of the forestry sector rose from 1.04 in 1963 to 1, 11 in 1966. It may well be said, therefore, that forestry induces much more self-supporting products in the production of one unit of final demand for forest products. B. Changes in column total of inverse matrix coefficient It should be noted that the column total indicates the degree of effect of the output of the corresponding and related sectors generated by one unit of final demand in each sector. No changes in the column total of the forestry sector were recorded between the 1963 and 1966 figures, both being the same 1. 19. C. Changes in difference between column total and intra-sector transaction amount. The difference between the column total and intra-sector transaction amount by sector reveals the extent of effect of output of related industrial sector induced indirectly by one unit of final demand in corresponding sector. This change in forestry dropped remarkable to 0.08 in 1966 from 0.15 in 1963. Accordingly, the effect of inducement of indirect output of other forestry-related sectors has decreased; this is a really natural phenomenon, as compared with an increasing input coefficient generated by the re-use of forest products by the forestry sector. 3. Induced output of forestry A. Forest products, wood in particular, are supplied to other industries as their raw materials, increasng their value added. In this connection the primary dependency rate on forestry for 1963 and 1966 was compared, i. e., an increase or decrease in each sector, from 7.71 percent in 1963 to 11.91 percent in 1966 in agriculture, 10.32 to 6.11 in fishery, 16.24 to 19.90 in mining, 0.76 to 0.70 in the manufacturing sector and 2.79 to 4.77 percent in the construction sector. Generally speaking, on the average the dependency on forestry during the period 1963-1966 increased from 5.92 percent to 8.03 percent. Accordingly, it may easily be known that the primary forestry output induced by primary and secondary industries increased from 16, 109 million won in 1963 to 48, 842 million won in 1966. B. The forest products are supplied to other industries as their raw materials. The products are processed further into higher quality products. thus indirectly increasing the value of the forest products. The ratio of the increased value added or the secondary dependency on forestry for 1963 and 1966 showed an increase or decrease, from 5.98 percent to 7.87 percent in agriculture, 9.06 to 5.74 in fishery, 13.56 to 15.81 in mining, 0.68 to 0.61 in the manufacturing sector and 2.71 to 4.54 in the construction sector. The average ratio in this connection increased from 4.69 percent to 5.60 percent. In the meantime, the secondary forestry output induced by primary and secondary industries rose from 12,779 million Wall in 1963 to 34,084 million won in 1966. C. The dependency of tertiary industries on forestry showed very minor ratios of 0.46 percent and 0.04 percent in 1963 and 1966 respectively. The forestry output induced by tertiary industry also decreased from 685 million won to 123 million won during the same period. D. Generally speaking, the ratio of dependency on forestry increased from 17.68 percent in 1963 to 24.28 percent in 1966 in primary industries, from 4.69 percent to 5.70 percent in secondary industries, while, as mentioned above, the ratio in the case of tertiary industry decreased from 0.46 to 0.04 percent during the period 1963-66. The mining industry reveals the heaviest rate of dependency on forestry with 29.80 percent in 1963 and 35.71 percent in 1966. As it result, the direct forestry income, valued at 8,172 million won in 1963, shot up to 22,724 million won in 1966. Its composition ratio lo the national income rose from 1.9 percent in 1963 to 2.3 per cent in 1966. If the induced outcome is taken into account, the total forestry production which was estimated at 37,744 million won in 1963 picked up to 105,773 million won in 1966, about 4.5 times its direct income. It is further noted that the ratio of the gross forestry product to the gross national product. rose significantly from 8.8 percent in 1963 to 10.7 percent in 1966. E. In computing the above mentioned ratio not taken into consideration were such intangible, indirect effects as the drought and flood prevention, check of soil run-off, watershed and land conservation, improvement of the people's recreational and emotional living, and maintenance and increase in the national health and sanitation. F. In conclusion, I would like to emphasize that the forestry sector exercices an important effect upon the national economy and that the effect of induced forestry output is greater than its direct income.

  • PDF

공정육묘시 재활용 상토에 신규상토 및 펄라이트의 혼합비율이 상토의 이화학적 특성과 과채류 묘소질에 미치는 영향 (Effect of Mixture Rate of Used Media and Perlite on Physico-Chemical of Properties Root Media and Seedling Quality in Fruit Vegetables Plug Nursery System)

  • 변효증;김영식;강호민;김일섭
    • 생물환경조절학회지
    • /
    • 제21권3호
    • /
    • pp.213-219
    • /
    • 2012
  • 과채류 공정육묘에서 접목작업 후 버려지는 재사용 상토의 이화학적 특성을 개선할 목적으로 재사용상토와 perlite의 혼합비율이 상토의 이화학적 특성과 과채류 묘소질에 미치는 영향을 조사하였다. 재사용 상토의 적정 혼합비율을 구명하기 위한 시험구는 신규상토(NPM: new plug media)와 1회 사용상토구(UPM: used plug media)및 용적대비 재사용상토의 첨가비율을 25, 50 및 75%로 첨가한 5개의 처리구를 설계한 뒤, 각 처리구별 이화학적 특성과 오이 및 토마토 묘의 묘소질에 미치는 영향을 조사하였다. 또, 재사용 상토의 물리성 개선을 위한 적정 펄라이트 첨가 비율을 구명하기 위한 시험구는 UPM에 용적대비 펄라이트를 0, 5, 10 및 20% 첨가구와 NPM과 UPM을 1 : 1(v : v)로 혼합한 혼합상토(Mixed Soil)에 펄라이트를 0, 5, 10 및 20%를 첨가한 8개의 처리구를 설계하여 각 처리구별 이화학적 특성과 오이 및 토마토 묘의 묘소질에 미치는 영향을 대조구(NPM)와 비교하였다. UPM에 NPM의 혼합비율이 증가할수록 상토의 물리적 특성이 개선되는 경향을 보여 50% 이상 첨가구에서는 신규상토와 공극율, 용적밀도, 보수력은 물론 전반적인 묘소질도 NPM과 유의적인 차이를 나타내지 않았다. 상토의 이화학적 특성, 플러그묘의 근권형성 정도, 묘소질 등을 종합적으로 고려한 UPM의 물리성 개선을 위한 펄라이트의 적정 혼합비율은 UPM 단용구에서는 20%, NPM과 UPM을 1 : 1(v : v)로 혼합한 상토에서는 10%인 것으로 판단되었다.

증량제의 종류가 Polyoxyethylene Laury Ether를 포함한 토양습윤제의 상토 내 잔류성, 상토의 수분 보유 및 이동에 미치는 영향 (Effect of Carriers on Residue of Wetting Agent Containing Polyoxyethylene Laury Ether, Initial Wetting and Water Movement in Container Media)

  • 최종명;정해준;심재성
    • 원예과학기술지
    • /
    • 제19권4호
    • /
    • pp.596-601
    • /
    • 2001
  • Polyoxyethylene laury ehter[$C_{12}H_{25}O(C_{2}H_{4}O)_{3}H$, PLE]를 polyoxyethylene+polypropyleneoxide tridecylether(1:1, w/w, CM-1)와 혼합한 토양습윤제를 조제할 때 증량제가 상토 내에서의 PLE 농도변화, 초기 습윤화, 상토 내에서의 수분이동 및 상토의 수분상실에 미치는 영향들을 조사하였다. 조제된 습윤제 PLE+CM-1에서 질석을 증량제로 이용한 경우 비석을 증량제로 이용한 처리보다 2주부터 6주까지의 용출량이 많았으며 6주 이후 급격히 농도가 낮아져 불안한 용출곡선을 보였다. 질석이 증량제로 이용된 처리에서 비석을 증량제로 이용한 처리보다 실험한 8주 동안 약 $500mg{\cdot}L^{-1}$이상의 PLE가 용출되었다. PLE+CM-1이 혼합된 처리들은 증량제의 종류와 관계없이 포트당 510mL의 이상의 수분을 보유하여 $AquaGro^{G}$처리의 490mL나 무처리구의 410mL보다 실험한 8주동안 더 많은 토양수를 보유하였다. 증발에 의한 수분상실에서는 비석을 증량제로 이용한 PLE+CM-1이나 대조구보다 더 빠르게 건조되었다. $AquaGro^{G}$ 혼합처리구에서 증량제의 종류와 관계없이 PLE+CM-1이 혼합된 처리들보다 상토 내에서의 수분이동이 빠르게 일어났으며, 단위시간당 상토 안으로 침투하는 수분량도 많았다. 질석을 증량제로 조제된 PLE+CM-1의 처리양이 증가해도 총 수분 보유량에서는 큰 차이를 보이지 않았으며, 증발에 의한 수분 상실에서는 $0.6mg{\cdot}L^{-1}$ 처리구에서, 상토 내로 침투하는 수분량에서는 $0.3mg{\cdot}L^{-1}$ 처리에서 가장 많았다.

  • PDF

월(月) 평균유역증발산량(平均流域蒸發散量) 추정(推定)에 관(關)한 연구(硏究) (A Study on the Estimation of Monthly Average River Basin Evaporation)

  • 김태철;안병기
    • 농업과학연구
    • /
    • 제8권2호
    • /
    • pp.195-202
    • /
    • 1981
  • 회개, 수자원획(水資源劃) 등(等) 이수(利水)를 목적(目的)으로 하는 장기유출해석(長期流出解析)에 있어 가장 중요(重要)한 인자(因子) 중(中)의 하나인 유역증발산량(流域蒸發散量)을 Water budget방법(方法)에 의(依)하여 산정(算定)하여, Pan, Potential, Regional evaporation과 Temperature와의 관계(關係)를 구명(究明)하여 유출기록(流出記錄)이 없는 무계기(無計器) 지역(地域)의 유역증발산량(流域蒸發散量)과 장기유출량(長期流出最)을 추정(推定)하기 위하여 금강수계(錦江水系) 용담지점(龍潭地點)의 5 개년(個年) 자료(資料)를 분석(分析)한 결과(結果)는 다음과 같다. 1. Pan evaporation과 River basin evaporation과의 비(比)($E_w/E_{pan}$)가 계절별(季節別) 성향(性向)을 가장 질서(秩序)있게 나타났으며, Pan evaporation으로부터 River basin evaporation을 Fig. 9 또는 Table-7로부터 추정(推定)할 수 있다. 2. Penman의 Potential evaporation을 적용하기 위하여 cloudness effect와 Wind function의 지역상수(地域常數)를 결정한 결과, 용담지역(龍潭地域)의 지역상수(地域常數)는 다음과 같다. $R_A=R_C(0.13+0.52{\frac{n}{D}})$ $E_a=0.35(e_s-e)(1.8+1.0U)$ 3. Regional evaporation [$E_R=(1-a)R_C-E_P$]는 유도과정의 가정에 따른 functional error가 큰 것으로 보여지나, 유역(流域)전반의 물리(物理), 화학(化學), 생물학적(生物學的)인 증발(蒸發)기구를 포괄적(包括的)으로 포용(包容)하고 있는 이와같은 이론적(理論的)인 함수개발(函數開發)이 요망된다. 4. 기상자료(氣象資料)가 미비(未備)한 지역(地域)에서는 기온(氣溫)만으로 Fig-11과 같이 개락적(槪略的)인 월(月) 평균(平均) 증발산(蒸發散)을 구(求)할 수 있다.

  • PDF

질소관비 수준이 래빗아이 블루베리 '브라이트웰'의 생장과 양분흡수에 미치는 영향 (Effect of Nitrogen Fertigation on The Growth and Nutrition Uptake of 'Brightwell' Rabbiteye Blueberry)

  • 곽용범;채원병;이목희;정해원;이한철;김진국;김홍림
    • 한국환경농학회지
    • /
    • 제36권3호
    • /
    • pp.161-168
    • /
    • 2017
  • 래빗아이 블루베리는 근모가 없는 섬유질 뿌리와 천근적 분포로 인하여 양분 이용효율이 낮다. 따라서 본 연구는 래빗 아이 블루베리의 생육과 과실특성에 미치는 질소 관비효과를 조사하여 효율성 높은 양분관리 기준을 마련하고자 수행하였다. 시험에 사용된 Brightwell(Vaccinium ashei Reade)품종의 관비처리는 재식 년차별 시비기준 (재식 1-2-3년 : 6-9-14 g/bush)으로 무 질소구와 기준 시비량의 50, 100 그리고 200%로 구분하여 처리하였다. 엽중 질소함량은 과중과 수확량에 유의성 있는 정의 상관관계를 나타냈다. 그러나 수관면적, 건물중, 당 그리고 안토시아닌 등은 유의성 있는 상관관계를 나타내지 않았다. 재식 3년차 블루베리의 엽과 줄기 건물중은 각각 723.7 g, 890.7 g/bush을 나타낸 50% 관비처리가 가장 높았다. 재식 3년차 과실수확량은 50%관비구에서 가장 높은 12.9 kg/bush으로 무비구 대비 약 70%의 증가량을 나타냈으며, 100%와 200% 관비구에서는 50% 관비구와 비교하여 각각 17와 12%가 감소한 11와 11.5 kg/bush의 수확량을 나타냈다. 질소 시비에 따른 이용율은 50% 관비구가 90%로 가장 높았으며, 200% 관비구가 가장 낮은 18%를 나타냈다. 따라서 본 연구는 기준 시비량의 50%를 관비하는 것이 'Brightwell'의 생육과 질소의 시비효율에 가장 효과적이었다는 결과를 제시하였다.

유색벼의 품종별 종자 비중, 발아 특성 및 기계이앙 육묘시 적정 파종량 (Seed Gravity, Germination, and Optimum Seeding Rate for Machine Transplanting in Colored Rice Varieties)

  • 김상열;한상익;오성환;이종희;박노봉;권오덕;권영업
    • 한국작물학회지
    • /
    • 제60권3호
    • /
    • pp.282-292
    • /
    • 2015
  • 최근 소비자들의 건강에 대한 관심이 증가함에 따라 건강기능성 성분이 다량 함유 되어 있는 유색벼 품종의 안전 육묘를 위한 종자의 발아특성, 적정 침종기간 및 적정 파종량을 구명하기 위한 시험결과는 다음과 같다. 1. 현미색이 흑색인 조생흑찰 및 신명흑찰은 비중이 1.0이하의 물에 뜨는 종자가 85.7~86.3%로 대부분을 차지하였고, 비중이 1.06이상 충실한 종자 비율은 1.0~1.3%로 다른 흑미에 비해 상대적으로 낮았다. 한편 신토흑미, 흑진주, 흑설, 흑남, 흑광은 비중이 1.0이하가 15.3~43.7%, 1.0~1.06이 24.6~39.4%, 1.0이상이 25.5~55.7%로 다양한 무게의 종자가 분포해 있었다. 그러나 적미인 홍진주, 적진주, 건강홍미는 일반벼인 일미벼와 같이 충실한 종자인 1.06이상의 비율이 84.0~86.6%로 높았고, 반면 비중이 1.0~1.06은 2.5~4.1%, 비중이 1.0이하의 물에 뜨는 종자의 비율은 9.3~12.1%로 낮았다. 2. 흑미는 일반적으로 물온도에 관계없이 발아율이 적미보다 낮았고 발아속도가 느렸으며 평균발아일수도 길었고 수분흡수율도 낮았다. 그 결과 80%이상 발아하기 까지 침종기간이 적미나 일반벼 보다 2~4일 가량 더 결렸다. 이것은 흑미는 비중이 1.0이하의 가벼운 종자가 적미보다 훨씬 높았기 때문이다. 3. 상자육묘시 흑미의 출아율은 10일묘에서 75.2~82.2%, 30일묘에서 85.3~90.9%로 적미보다 10일묘에서는 4.5~8.0%, 30일묘에서는 0~3.3% 낮았는데 이것은 미출아율 종자가 많았기 때문이었다. 4. 기계이앙 육묘시 유색벼의 안전 육묘를 위한 적정 파종량은 관행 일미벼 어린모 및 중묘의 상자당 성묘개체수를 기준으로 흑미의 경우 어린모는 200~220g, 중묘는 110~130g이었고 적미는 일반벼와 같이 어린모 220g, 중묘 130g이었다.