• 풍력에너지저널
• /
• 제4권1호
• /
• pp.20-29
• /
• 2013

Load measurement, which is performed based on IEC 61400-13, consists of three stages: the stage of collecting huge amounts of load measurement data through a measurement campaign lasting for several months; the stage of processing the measured data, including data validation and classification; and the stage of analyzing the processed data through time series analysis, load statistics analysis, frequency analysis, load spectrum analysis, and equivalent load analysis. In this research, we pursued the development of an analysis software in MATLAB to save labor and to secure exact and consistent performance evaluation data in processing and analyzing load measurement data. The completed analysis software also includes the functions of processing and analyzing power performance measurement data in accordance with IEC 61400-12. The analysis software was effectively applied to process and analyse the load measurement data from a demonstration research for a 750 kW direct-drive wind turbine generator system (KBP-750D), performed at the Daegwanryeong Wind Turbine Demonstration Complex. This paper describes the details of the analysis software and its processing and analysis stages for load measurement data and presents the analysis results.

• 한국국방경영분석학회지
• /
• 제22권2호
• /
• pp.90-112
• /
• 1996

Research issues in software engineering in recent may be object oriented methodology and software quality. Since Halstead has proposed metric-software science in 1977, software quality area has been studied in steady but inactively until 1980s. As international standards such as ISO 9000-3, 9126 were enacted in 1990s early, interest in software quality is increased but many problems such as how to validate metric, measure quality or apply metric are remained. This paper proposes software quality metric methodology which software developer or project manager can use in measuring quality and validating metric during software development. The methodology is classified by several phases: establishment of quality requirement, identification of quality metric, data collection, metric implementation, metric validation. In order to show its applicability, test program, metrics and data are applied to each phase of the methodology. Consideration of this methodology as a methodology for software quality measurement similar to development methodology for software development is needed.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2001년도 춘계학술대회
• /
• pp.39-43
• /
• 2001

The existent system of management for Measurement of Safety Cost are not effective because of the data loss and time loss and occurrence of errors through manual calculation. Therefore, tile development of the software for measurement of safety cost can solve the problem through the systematic calculation for safety cost and converting the related data to database, and also can build the strategy of the investment of Safety cost through analysing and comparing with the past data in the database. As a part of development of the software of Measurement of Safety Cost which is appropriate for the domestic environment, this study is developing a software based on Noguji method, which is one of the methods of Measurement of Safety Cost, and to appraise the efficiency of the management of Measurement of Safety Cost we will implement and improve the software in the case of the domestic enterprises.

• 대한안전경영과학회지
• /
• 제3권1호
• /
• pp.1-10
• /
• 2001

The existent system of management for Measurement of Safety Cost are not effective because of the data loss and time loss and occurrence of errors through manual calculation. Therefore, the development of the software for measurement of safety cost can solve the problem through the systematic calculation for safety cost and converting the related data to database, and also can build the strategy of the investment of Safety cost through analysing and comparing with the past data in the database. As a part of development of the software of Measurement of Safety Cost which is appropriate for the domestic environment, this study is developing a software based on Noguji method, which is one of the methods of Measurement of Safety Cost, and to appraise the efficiency of the management of Measurement of Safety Cost we will implement and improve the software in the case of the domestic enterprises.

• 품질경영학회지
• /
• 제28권1호
• /
• pp.175-195
• /
• 2000

In this study, we developed a statistical software for measurement systems analysis. This software is patterned after the Measurement Systems Analysis Reference Manual developed by the Automotive Industry Action Group (AIAG). This software includes stability analysis, bias and linearity analysis, and gage R&R studies. This software was developed by using Delphi(version 4.0) and can be implemented on MS Windows 95 or higher level.

• 시스템엔지니어링학술지
• /
• 제14권2호
• /
• pp.49-57
• /
• 2018

The main objective of this paper is come up with methodology approach for FPGA-based system in verification and validation lifecycle regarding software reliability using system engineering approach. The steps of both reverse engineering and re-engineering are carried out to implement an FPGA-based of safety critical system in Nuclear Power Plant. The reverse engineering methodology is applied to elicit the requirements of the system as well as gain understanding of the current life cycle and V&V activities of FPGA based-system. The re-engineering method is carried out to get a new methodology approach of software reliability, particularly Software Reliability Growth Model. For measure the software reliability of a given FPGA-based system, the following steps are executed as; requirements definition and measurement, evaluation of candidate reliability model, and the validation of the selected system. As conclusion, a new methodology approach for software reliability measurement using software reliability growth model is developed.

• 스마트미디어저널
• /
• 제4권2호
• /
• pp.34-45
• /
• 2015

윈도우는 국내에서 가장 많이 사용되는 운영체제이기 때문에 윈도우용 소프트웨어를 대상으로 불법 복제가 많이 이루어지고 있고 불법 복제로 인해 소프트웨어 저작권이 침해될 수 있다. 이를 보호하기 위해서 저작권 보호 방법 중 하나인 소프트웨어 버스마크를 사용한다. 소프트웨어 버스마크는 소프트웨어로부터 특정 정보들을 추출하여 소프트웨어간 도용 여부를 판별할 수 있는 기술이며 대상 소프트웨어로 부터 특정 정보를 추출하는 방법에 따라 정적 버스마크와 동적 버스마크로 구별된다. 정적 버스마크와 동적 버스마크는 서로 장단점을 가지고 있지만 본 논문에서는 API 기반 동적 버스마크를 이용한 유사도 측정 기법을 제안하고, 동적 버스마크의 추출 과정을 설명한다. 또한 실험을 통해 제안하는 동적 버스마크의 유사도 측정 기법이 신뢰성과 강인성을 만족하는 것을 확인할 수 있었으며 기존 동적 버스마크의 유사도 측정 기법보다 제안하는 동적 버스마크의 성능이 향상 된 것을 확인할 수 있었다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2003년도 봄 학술발표논문집 Vol.30 No.1 (B)
• /
• pp.52-54
• /
• 2003

Measurement is used to improve software process and to help calculating software quality. It makes software project to be control and help producing software. Measuring software scale becomes important target in software development. LOC is used to measure the size intentioned aspect and function point is used to measure the function intentioned aspect. This paper discusses measurement method using function point, which fullows proposed rule, and degree of GUI (Graphical User Interface) accesses achieved by applying this measurement to web page. Applying proposed rules to web pages (specially that use much GUI such as shopping mall or auction site), there is advantage that calculate site changes on numerical value by measuring GUI degree when do site administration or update.

• 정보처리학회논문지D
• /
• 제16D권3호
• /
• pp.353-360
• /
• 2009

대부분의 정보시스템은 컴포넌트 기반으로 아웃소싱에 의해 개발되고 있으며, 개발된 소프트웨어들은 통합되어 유지보수 되고 있다. 그러나 유지보수의 생산성과 효율성 제고를 위한 기반 연구인 비용 측정지표 및 비용 추정 모델에 관한 연구가 부족하다. 본 연구는 컴포넌트 기반의 소프트웨어에 대한 유지보수의 비용에 대한 측정지표를 제안하고, 제안한 측정지표의 의한 컴포넌트 소프트웨어의 유지보수 비용 추정 모델을 연구한다. 컴포넌트 기반의 유지보수 비용 측정지표를 추정하기 위하여 기존에 제시된 지표들을 비교 정리하고, 정리된 측정지표가 컴포넌트 소프트웨어 유지보수 유형에 따라 어떻게 적용되는지를 분류하고 유형별 비용 측정지표를 제안한다. 또, 제안한 측정지표를 이용한 컴포넌트 소프트웨어 유지보수 유형에 따른 비용 추정 모델을 제안한다. 제안한 추정 모델의 사례연구를 실시하여 유효성을 검증한다.

• 품질경영학회지
• /
• 제27권3호
• /
• pp.94-112
• /
• 1999

It is booming to use computer and information owing to the information society. As software applications have grown, so too has the importance of software quality. Therefore, software quality measurement and evaluation are necessary to satisfy the users who are using computers. The ISO/IEC 9126 defines six quality characteristics and twenty-one subcharacteristics including forty inter quality characteristics. We developed software measurement and evaluation technique using the check list in accordance with the ISO/IEC 9126 in design phase. We applied idea and concept of Total Quality Management in order to evaluate and measure the quality of software. Namely, it is the concept such as "you should do it right the first time." or "you have to build quality in the process." We executed the quantitative evaluation of software, also had shown the distinctive result in order that users and developers can find the errors easily. We evaluated the quality of academic softwares in order to verify developing technique at S college. As a result of the evaluation, this college has found it necessary to maintain the software as soon as possible because academic systems are not adequate for users at this present time.