• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.3
• /
• pp.367-372
• /
• 2018

The objective of this paper is to optimize the cross-section of aluminum decking units used in the bass boats under operating conditions, and to verify the optimized model from the results via by ANSYS software. Aluminum decking unit is needed to endure specific loading while leisure activity and sailing. For a stiffer and more cost-neutral aluminum decking unit, optimization is often considered in the naval and marine industries. This optimization of the aluminum decking unit is performed using the ANSYS program, which is based on the topology optimization method. The generation of finite element models and stress evaluations are conducted using the ANSYS Multiphysics module, which is based on the Finite Element Method (FEM). Through such a series of studies, it was possible to determine the most suitable case for satisfying the structural strength found among the phase-optimized aluminum deck units in bass boats. From these optimization results, CASE 1 shows the best solution in comparison with the other cases for this optimization. By linking the topology optimization with the structural strength analysis, the optimal solution can be found in a relatively short amount of time, and these procedures are expected to be applicable to many fields of engineering.

• Journal of Korea Multimedia Society
• /
• v.12 no.1
• /
• pp.122-129
• /
• 2009

Incorporating proprietary existing it solutions like legacy systems or vendor specific with new technologies is an expensive and time consuming task. Such situations take place due to the lack of ability of proprietary software to cooperate with other parties or to cooperation only with specific vendor products. Such a situation is undesirable and causes a prolonged adaptation period for new applications. This thesis is to show the new approach to creation of Internet applications in Service Oriented Architecture through loose coupling, introduces fare more flexibility into a system composed of connected applications. This approach allows one to integrate through XML based Web Service and reuse a number of arbitrary services available over the Internet in a complex processes specified as a workflow model.

• The Journal of Information Systems
• /
• v.19 no.1
• /
• pp.79-96
• /
• 2010

The organizations in the competitive business environment are under pressure of handling internal management processes as well as external supply chain issues. In addition, the paradigm of supply chain management (SCM) has been shifted from static to dynamic problems. For the efficient SCM, organizations should be a RTE (Real Time Enterprises) that views entire supply chains as a single entity. In this paper, the agent system that makes RTE and dynamic supply chains possible is developed. Then, the developed agent system is verified in the TAC SCM(Trading Agent Competition Supply Chain Management) experimental environment and a dashboard is also developed for monitoring management activities of supply chains. The contributions of this paper are as followings. First, unlike the previous agent systems, the suggested agent system in this paper provides autonomy and scalability using SOA. Second, this suggested model for dynamic environment can be applied for the development of software supporting a SCM.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.4
• /
• pp.83-89
• /
• 2013

A numerical scheme based on a mode superposition method is presented for the dynamic response analysis of a top-tensioned riser (TTR) under sheared current loads. The natural frequencies and mode shapes of the TTR have been calculated analytically for a beam with a slowly varying tension and pinned-pinned boundary conditions at the top and bottom ends. The lift coefficients and corresponding amplitudes used to estimate the vortex-induced modal force and damping for each mode were predicted via iterative calculations based on the input and output power balancing concept. Here, the power-in regions were controlled by the normal distribution function, for which the center was coincident with the lock -in location by local vortex-shedding, and the range was defined by the constant standard deviation for the reduced velocity by the local current speed. Finally, dynamic responses such as root-mean-squared displacement and stress were calculated using the mode superposition technique. In order to verify the presented scheme, a numerical calculation was performed for a TTR under an arbitrary linearly sheared current and linearly varying tension. A comparison with the results of the existing software showed that the presented scheme could give reliable and feasible solutions. Case studies were performed to investigate the effects of various current loads and tensions.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.16 no.2
• /
• pp.1-11
• /
• 2008

Increasing demand for improved reliability and survivability of mission-critical systems is driving the development of health monitoring and Automated Contingency Management (ACM) systems. An ACM system is expected to adapt autonomously to fault conditions with the goal of still achieving mission objectives by allowing some degradation in system performance within permissible limits. ACM performance depends on supporting technologies like sensors and anomaly detection, diagnostic/prognostic and reasoning algorithms. This paper presents the development of a generic prototype test bench software framework for developing and validating ACM systems for advanced propulsion systems called the Propulsion ACM (PACM) Test Bench. The architecture has been implemented for a Monopropellant Propulsion System (MPS) to demonstrate the validity of the approach. A Simulink model of the MPS has been developed along with a fault injection module. It has been shown that the ACM system is capable of mitigating the failures by searching for an optimal strategy. Furthermore, the concepts of Validation and Verification (V&V) of such systems are introduced with relevant examples.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.140-145
• /
• 2009

Recently, lots of research activities have been carried out to provide advanced smart control functions applying a computer networking technology to telemeter/telecontrol systems. In this paper, we suggest client/server architecture with specially designed remote and local control software for applicant those to greenhouse model. The server system collects and integrates various datas related sensor or actuator, and stores in database maintaining high quality of remote I/O control operation. Where as the client system simply operation such as control panel on the internet web browser. Implemented system well communicate interactively both monitoring and control status of greenhouse including multimedia informations. In this study we also analyze the extent of the performance enhancement in terms of overall throughput and data transfer time effected by packet size.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.3
• /
• pp.105-110
• /
• 2017

Underfloor air distribution (UFAD) is an air distribution strategy for providing ventilation and space conditioning in buildings. UFAD systems use the underfloor plenum beneath a raised access floor to provide conditioned air through floor diffusers that create a vertical thermal stratification during cooling operations. Thermal stratification has significant effects on energy, indoor air quality, and thermal comfort performance. The purpose of this study was to characterize the influence of a linear bar grille diffuser on thermal stratification in both interior and perimeter zones by developing Gamma-Phi based prediction models. Forty-eight simulations were carried out using a Computational Fluid Dynamics (CFD) technique. The number of diffusers, the air flow supply, internal heat gains, and solar radiations varied among the different cases. Models to predict temperature stratification for the tested linear bar grille diffuser have been developed, which can be directly implemented into dynamic whole-building simulation software such as EnergyPlus.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.3
• /
• pp.177-188
• /
• 2013

The construction industry consists of various and massive architectural information as an architectural process includes a variety of design stages with cooperation of many disciplines. Particularly, architectural information is generated and managed through the life cycle of a building, from conceptual design stage to the construction and maintenance. A Building Information Model (BIM) serves as a shared knowledge resource for information about a facility forming a reliable basis for decisions during its life-cycle from inception onward. BIM technology accomplished quantitative development being utilized in various disciplines. However, it is necessary to develop environment and requirement for qualitative improvement of BIM based project. Particularly, requirement is very important for architectural design evaluations. The purpose of this study is to develop and apply of quality control check-list for improving the quality of architectural design in BIM environments. To achieve this purpose, the authors have investigated case study for open BIM data quality control (software, guideline and application case) and classified quality control targets according to physical/logical quality control and data quality. In addition, the authors have defined open BIM based quality control process and developed quality control check-list. Finally, the authors have developed automatic quality check system using requirements for efficient quality control based on open BIM.

• Korean Institute of Interior Design Journal
• /
• v.17 no.2
• /
• pp.150-161
• /
• 2008

It requires more close cooperation process and mediator for smooth communication in this industry structure where design and engineers are separated. The database of design integrates separate system and helps connection between organizations. The application category is utilized variously from formation to operation. Architectures addressed in this content as Frank Gehry and Nox are making differentiated design on the base of 3d digital methodology and using it widely from generation to fabrication. Especially they got to be free from the generative limit as it became available to analyse, digital surface organization, and realize the complex system form. Now more integrated and delicate works got to be affordable owing to various kinds of improved CNC, RP(rapid-prototype) machines, and architecture hardwares. With a linkage of software now at their disposal, architects can create a digital model of a building and all of its design elements, and in turn use this 3d information to construct actual building components using machines driven by CNC and other advanced manufacturing techniques. Digital technologies are enabling a direct correlation between what design and construction, thus bringing to the forefront the issue of the significance of information, the production, communication, application, and control of digital information in the industrial system. The central requirement is the clear, reliable, and consistent exchange of information among all parties involved in creating a given project.

• KIEAE Journal
• /
• v.10 no.6
• /
• pp.145-151
• /
• 2010

Bearing wall system was used extensively in most multi-residential apartment buildings in Korea. However, bearing wall apartments have the lack of architectural plan flexibility, remodelling-incompatible, causing serious economic losses in terms of construction waste. Recently, many researchers have studied the use of Rahmen structure as a potential alternative. The beam-column connection in the paper for long-life apartment housing forms connection of a Rahmen structure utilizing the advantages of steel and reinforced concrete. In addition, reduction of cast-in place concrete and construction schedule is expected by using precast concrete. Reduction effect of quantity decreased construction costs and $CO_2$ emission of key construction materials. However, verifying the feasibility of new construction method entails numerous challenges. Accordingly, the purpose of this study is to analyze the construction feasibility of sleeve, coupler, and pressure welding connections for long-life apartment building structure. A 3D modeling software was used to perform the analysis, and a real scale model was created to verify the results of construction feasibility. By verifying the construction feasibility of beam-column connections, this study will contribute to the efficient application of these methods on construction sites.