• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1867-1870
• /
• 2005

The celestial navigation is one of alternatives to GPS system and can be used as a backup of GPS. In the celestial navigation system using more than two star trackers, the vehicle's ground position can be solved based on the star trackers' attitude information if the vehicle's local vertical or horizontal angle is given. In order to determine accurate ground position of flight vehicle, the high accurate local vertical angle measurement is one of the most important factors for navigation performance. In this paper, the Earth geophysical deflection was analyzed in the assumption of using the modern electrolyte tilt sensor as a local vertical sensor for celestial navigation system. According to the tilt sensor principle, the sensor measures the tilt angle from gravity direction which depends on the Earth geoid surface at a given position. In order to determine the local vertical angle from tilt sensor measurement, the relationship between the direction of gravity and the direction of the Earth center should be analyzed. Using a precision orbit determination software which includes the JGM-3 Earth geoid model, the direction of the Earth center and the direction of gravity are extracted and analyzed. Appling vector inner product and cross product to the both extracted vectors, the magnitude and phase of deflection angle between the direction of gravity and the direction of the Earth center are achieved successfully. And the result shows that the angle differences vary as a function of latitude and altitude. The maximum 0.094$^{circ}$angle difference occurs at 45$^{circ}$latitude in case of 1000 Km altitude condition.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.147-153
• /
• 2018

Beacon enables one to measure distance indoors based on low-power Bluetooth low energy (BLE) technology, while GPS (Global Positioning System) only can be used outdoors. In measuring indoor distance using Beacon, RSSI (Received Signal Strength Indication) is considered as the one of the key factors, however, it is influenced by various environmental factors so that it causes the huge gap between the estimated distance and the real. In order to handle this issue, we propose the adaptive ANN (Artificial Neural Network) based approach to measuring the exact distance using Beacon. First, we has carried out the preprocessing of the RSSI signals by applying the extended Kalman filter and the signal stabilization filter into decreasing the noise. Then, we suggest the multi-layered ANNs, each of which layer is learned by specific training data sets. The results showed an average error of 0.67m, a precision of 0.78.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.4
• /
• pp.49-57
• /
• 2008

The cemetery areas which are occupied more than 1.0 percent of whole land of Korea have widened gradually but the reconnaissance is not being conducted for the cemetery investigation due to deficiencies for budget and manpower of the government. The aim of this study is to find a method to establish the lower cost GIS-based cemetery management system by using hand-held DGPS receiver and Mobile GIS software system for easy cemetery management. The results were evaluated and compared to the RTK GPS method. Since the Cemetery Management System shows every tomb's position on the high resolution satellite imagery with a cadastral data, the map helps to find the interesting places easily. Therefore the system data can be used for various purposes such as planning for land development, dealing with real estate as well as cemetery management.

• Journal of Advanced Navigation Technology
• /
• v.21 no.3
• /
• pp.272-278
• /
• 2017

In order to meet performance requirements specified by the ICAO in drone operation, a system that provides augmentation information such as SBAS is needed. However, the operating range of the drone is limited in situation where the drone can not received the SBAS message continuously. In this paper, we propose a system to transmit SBAS augmentation message using a separate communication channel assuming the SBAS satellite signal to the drone has been shielded. We implemented the proposed system and verified its performance in the static environment. The DGPS positioning results showed that the accuracy difference is about 10cm, which means the accuracy performance was very similar. In addition, the protection level calculated by the system also shows the difference within 2m from the value calculated by the airborne receiver.

• Journal of Industrial Convergence
• /
• v.18 no.1
• /
• pp.79-85
• /
• 2020

Recently, the RPAS(Remote Piloted Aircraft System), by remote control and autonomous navigation, has been increasing in interest and utilization in various industries and public organizations along with delivery drones, fire drones, ambulances, agricultural drones, and others. The problems of the stability of unmanned drones, which can be self-controlled, are also the biggest challenge to be solved along the development of the drone industry. drones should be able to fly in the specified path the autonomous flight control system sets, and perform automatically an accurate landing at the destination. This study proposes a technique to check arrival by landing point images and control landing at the correct point, compensating for errors in location data of the drone sensors and GPS. Receiving from the Google Map API and learning from the destination video, taking images of the landing point with a drone equipped with a NAVIO2 and Raspberry Pi, camera, sending them to the server, adjusting the location of the drone in line with threshold, Drones can automatically land at the landing point.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.2
• /
• pp.89-97
• /
• 2015

In this paper, we propose a handoff method supporting LBS (Location Based Services) Information in mobile clouding environment. In mobile clouding computing, handoff delay and re-authentication is occurred. A mobile node needs re-authentication procedure from cloud server whenever it arrives new AP. But Using of location information of node enables to reduce delay time due to re-authentication. To reduce re-authentication delay time, proposed method stores location information of APs on WiFi based location server to complement. GPS-based technology which can't receive satellite signal in indoor and then node collects location information of AP at handoff time. And also enables to process LBS without increasing handoff delay by splitting the process of handoff from process of requesting location information. For analysis of proposed method, We analyze handoff delay and location information process time and have compared previous handoff method in cloud environment. We confirmed that proposed method shows lower delay time without increasing LBS process time than previous method because node receives location information from location information server when handoff is occurred.

• The KIPS Transactions:PartD
• /
• v.12D no.5 s.101
• /
• pp.709-718
• /
• 2005

To correspond with the unpredictable future tactical environment, Ive expanded the application of M&S(Modeling & Simulation) that is more scientific and more economic in a field of weapon system development process. This paper describes experience in development of ADSF(Air Defense Simulation Framework) that supports not only HLA(High Level Architecture) which is an international standard in M&S but also TCP/IP as well as real-time distributed simulation. ADSF has been applied to the M-SAM(Medium Range Surface to Air Missile) System Simulator, and satisfying test results through GPS(Global Positioning System) timer has been acquired. As a result, an ADSF which is able to support HLA and TCP/IP as veil as precise real-time simulation has been successfully made. we were in need or a real-time simulation engine to support Air Defense System Simulators that were consisted of several subsystems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.632-637
• /
• 2019

Recent researches on autonomous driving of vehicles are becoming very active, and it is a trend to assist safe driving and improve driver's convenience. Autonomous vehicles are required to combine artificial intelligence, image recognition capability, and Internet communication between objects. Because mobile telecommunication networks have limitations in their processing, they can be easily implemented and scale using an easily expandable Wi-Fi network. We propose a wireless design method to construct such a vehicle control network. We propose the arrangement of AP and the software configuration method to minimize loss of data transmission / reception of mobile terminal. Through the design of the proposed network system, the communication performance of the moving vehicle can be dramatically increased. We also verify the packet structure of GPS, video, voice, and data communication that can be used for the vehicle through experiments on the movement of various terminal devices. This wireless design technology can be extended to various general purpose wireless networks such as 2.4GHz, 5GHz and 10GHz Wi-Fi. It is also possible to link wireless intelligent road network with autonomous driving.

• Journal of Positioning, Navigation, and Timing
• /
• v.13 no.1
• /
• pp.75-83
• /
• 2024

In order to reduce the time and cost of developing a navigation system, a performance evaluation platform can be used. A User Interface (UI) is required to effectively evaluate the performance, which sets parameters and gives navigation sensor signals and data display, and also displays navigation results. In this paper, a LabVIEW-based UI design method for multi-integrated navigation systems is proposed and implementation results are presented. The UI consists of a signal and data generation part and a signal and data processing part. The signal and data generation part sets parameters for the signal and data generation and displays the navigation sensor signal and data generation results. The signal and data processing part sets parameters for the signal and data processing and displays the navigation results. The signal and data generation part and signal and data processing part are designed to satisfy the requirements of the UI for a performance evaluation of the navigation system. In order to show the usefulness of the proposed UI design method, parameters of the signal and data generation and the signal and data processing are set through the LabVIEW-based UI, and the Global Positioning System (GPS) signal and inertial measurement unit data generation results and the navigation results of a GPS Software Defined Receiver (SDR) and inertial navigation system are confirmed. The implementation results show that the proposed UI design method helps users conduct an effective performance evaluation of navigation systems.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.788-797
• /
• 2023

In this paper, we introduced a test environment to test a vision-aided navigation system, as an alternative navigation system when global positioning system (GPS) is unavailable, for vertical take-off and landing (VTOL) unmanned aerial system. It is efficient to use a virtual environment to test and evaluate the vision-aided navigation system under development, but currently no suitable equipment has been developed in Korea. Thus, the proposed test environment is developed to evaluate the performance of the navigation system by generating input signal modeling and simulating operation environment of the system, and by monitoring output signal. This paper comprehensively describes research procedure from derivation of requirements specifications to hardware/software design according to the requirements, and production of the test environment. This test environment was used for evaluating the vision-aided navigation algorithm which we are developing, and conducting simulation based pre-flight tests.