• 한국의류학회지
• /
• 제9권2호
• /
• pp.27-34
• /
• 1985

Cotton, P/C and polyester fabrics were laundered and treated with 4 kinds of aftertreating agent(antistatic and softening agents) on marketing. Some treating condition:. which include agent concenteration, treating time and rinsing extent after laundering, were varied. And then the effects of agents with each treating condition-handle value, charged voltage and half-life, and crease recovery etc.-were determined and discussed about their change. The improvement of handle and antistatic properties by treatment were indicated remarkably for cotton fabric and P/C and polyester fabrics respectively. Generally, the handle value of cotton was decreased and then increased again, and the charged voltage and half-life of P/C and polyester fabrics were decreased with increase of concenteration of agents. The effect of antistatic improvement for P/C fabric was larger than polyester fabric at even lower concenteration of agents. The effects were increased with treating time and rinsing extent. In particular, those of short time(1 minute) treatment were very small.

• 한국정밀공학회지
• /
• 제20권10호
• /
• pp.199-207
• /
• 2003

The Timoshenko beam model has been known as the most accurate model for representing beam structures. However, the Timoshenko beam model may give rise to a significant error when it is applied to multi-stepped beam structures. This paper is intended to demonstrate the modeling error of Timoshenko beam based finite element model for multi-stepped beam structures and to suggest a new modeling method to improve the accuracy. A tentative bending spring is introduced into the stepped section to represent the softening effect due to the presence of step. This paper also proposes a finite element modeling method in the light with the tentative bending spring model for the step softening effect. The proposed method rigorously adapts computation results from a commercial finite element code. The validity of the proposed method is demonstrated through a series of simulation and experiment.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2001년도 춘계 학술발표대회
• /
• pp.80-82
• /
• 2001

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 춘계 총회 및 학술발표회
• /
• pp.145-147
• /
• 1999

• Journal of Pharmaceutical Investigation
• /
• 제4권1_2호
• /
• pp.39-45
• /
• 1974

According to previous paper, the hardness of semi-solid as ointments and suppositories causes the tough or skin, the pain and connected with absorption, the state of spread or the efficiency of drug. When the hardening agent or the softening agent is added to ointment whid, is registered on the pharmacopeia of the republic of Korea, the experimertal data by apparent logarithmic hardness are shown is Table 1. The results are as the folloring. 1) In case of the softening agent which is added to ointment base, each has shown two different equation with differnented slope as $K_1$ and $K_2$ value determined (Fig. 1,2). 2) When the hardening agent is added to same ointment base, these studies indicated that there is a direct correlation between $K_1$ and $K_2$. However, in case of softening agent $K_1$ and $K_1$ are not correlated as indicated in Fig. $3{\sim}8$. 3) On condition of same ointment base, the critical poit is proportional to $K_1$ 4) The second effect is at least $3{\sim}17$ times more. sensitive than the first effect or in average 8.3 times more sensitive, Therefore, the results presented in this paper. Suggest that, when the drug is added to a certain ointment base, it should be added within this first effect before the critical point is reached.

• 한국식품과학회지
• /
• 제28권2호
• /
• pp.393-395
• /
• 1996

배추조직의 연화방지를 위해 0.05 M $CaCI_2$ 용액중에서 배추의 예비열처리와 pectinesterase 주입전처리 및 효소의 침투를 용이하게 하기 위한 감압처리의 효과를 조사하였다. $CaCI_2$ 용액중 예비열처리에 의해 줄기는 약 50% 이상 경도가 증가하였고, 잎사귀의 경우는 약 4-5배 증가하였으며, PE 효소를 첨가한 경우 줄기 및 잎사귀 모두에서 경도가 더욱 증가하여 상승효과를 나타내었다. 배추를 감압처리한 후 효소를 주입 처리한 경우. 잎사귀 부분에서는 별다른 변화가 없었으나 줄기 부분의 경우 감압처리후 효소주입처리한 시료들은 모두 경도가 증가하였으며, 저장시험에 따르면 김치제조 4일째까시 경도유지 효과가 있었으나 그 후 점차 감하였다.

• 한국식품영양과학회지
• /
• 제35권1호
• /
• pp.104-108
• /
• 2006

건고사리에 Co-60 감마선을 0, 3, 5, 7 kGy로 달리하여 조사한 후 습열 조리 조건에 따른 연화정도를 분석하였다. 건고사리의 경도는 5 kGy이상의 조사선량에서 유의적으로 감소하였다(p<0.05). 습열 조리 조건에 따른 고사리의 경도는 조사선량이 높을수록 대조군에 비하여 유의적으로 감소하였다. 고사리의 경도가 대조군에 비하여 $50\%$ 감소되는 시간인 $DT_{50}$은 조사선량이 높을수록 단축되었다. 즉, $60^{\circ}C$에서 조리시 대조군은 23분, 5및 7 kGy 조사군은 $2.2\~5.0$ 분이었다. 건고사리 습열 조리시 연화에 따른 활성화 에너지는 조사선량이 높을수록 크게 낮아져 대조군은 4.30 kcal/mole, 5 및 7 kGy 조사군은 $1.85\~1.88 kcal/mol$이었다. 또한, 조사선량이 높을수록 일정온도에서 습열 조리 시간 경과에 따른 수분함량, 부피 증가율, 수화 복원력은 대조군에 비해 유의적으로 증가하였으나 관능검사 시 이취 및 냄새에 대한 점수는 대조군과 유의적인 차이가 없었다. 이상의 결과로부터 건조 채소류에 적정 선량의 방사선을 조사할 경우 조리시 재수화 및 연화에 필요한 시간 및 에너지를 단축시킬 수 있었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.427-733
• /
• 2003

Adiabatic shear bands have been observed in the serrated chip during high strain rate metal cutting process of medium carbon steel and titanium alloy. The recent microscopic observations have shown that dynamic recrystallization occurs in the narrow adiabatic shear bands. However the conventional flow stress models such as the Zerilli-Armstrong model and the Johnson-Cook model, in general, do not predict the occurrence of dynamic recrystallization (DRX) in the shear bands and the thermal softening effects accompanied by DRX. In the present study, a strain hardening and thermal softening model is proposed to predict the adiabatic shear localized chip formation. The finite element analysis (FEA) with this proposed flow stress model shows that the temperature of the shear band during cutting process rises above 0.5T$\sub$m/. The simulation shows that temperature rises to initiate dynamic recrystallization, dynamic recrystallization lowers the flow stress, and that adiabatic shear localized band and the serrated chip are formed. FEA is also used to predict and compare chip formations of two flow stress models in orthogonal metal cutting with AISI 1045. The predictions of the FEA agreed well with the experimental measurements.

• Computers and Concrete
• /
• 제22권3호
• /
• pp.305-317
• /
• 2018

Steel reinforced Engineered Cementitious Composite (ECC) components have been proposed for seismic structural applications, for example in coupling beams, infill panels, joints, columns, and flexural members. The development of strain in the steel reinforcement of cementitious components has been shown to vary based on both the steel reinforcement ratio and the applied deformation history. Strain in the steel reinforcement of reinforced ECC components is an important structural response metric because ultimate failure is often by fracture of the steel reinforcement. A recently proposed bond-slip model has been successfully calibrated to cyclically tested reinforced ECC beams wherein the deformation history contained monotonically increasing cycles. This paper reports simulations of two-dimensional finite element models of reinforced ECC beams to determine the appropriateness and significance of altering a phenomenological bond-slip model based on the applied deformation history. The numerical simulations with various values of post-peak bond-slip softening stiffness are compared to experimental results. Varying the post-peak bond-slip softening stiffness had little effect on the cracking patterns and hysteretic response of the reinforced ECC flexural models tested, which consisted of two different steel reinforcement ratios subjected to two different deformation histories. Varying the post-peak bond-slip softening stiffness did, however, affect the magnitude of strain and the length of reinforcing bar that strain-hardened. Overall, a numerical model with a constant bond-slip model represented well various responses in reinforced ECC beams with multiple steel reinforcement ratios subjected to different deformation histories.

• Journal of Biosystems Engineering
• /
• 제27권4호
• /
• pp.335-340
• /
• 2002

Recently, in Korea, round bale wrapping silage made by fresh rice straw are partially utilized. The colors of stretch film using far wrapping the fresh rice straw round bale are white, green and black. The light transmittance of green and white color stretch film was not founded the difference. However, the light transmittance of black color stretch film was largely difference of two stretch films. This study was carried out to measure qualities of fresh rice straw wrapping silage by softening processing of fresh rice straw and colors effects of wrapping stretch film. The analyzed factors were the light transmittance of stretch film, variation of the temperature in fresh rice straw round bale and qualities of the silage in crude protein, ADF, NDF, organic acid, etc. It was difficult to find in this study the colors effects of stretch film on silage qualities by the silage wrapping. But, when make fresh rice straw wrapping silage, wrapping silage fermentation effect goes well more if handle softening the fresh rice straw.