• 한국유기농업학회지
• /
• 제23권2호
• /
• pp.291-299
• /
• 2015

본 연구에서는 인산가용화 균주인 Kluyvera sp. CL2 처리시기가 과실품질에 미치는 영향을 구명하고자 본 연구를 실시하였다. 토양의 화학성 변화는 경핵기 처리구에서 인산이 가장 많이 증가하였고, K, Ca, Mg도 증가됨을 알 수 있었으며, pH의 변화는 토양 완충능에 의하여 적었다. 인산가용화균 처리에 따른 수용성 인산의 변화는 처리 시부터 20일 까지 효과적이었으며, 과립연화기 처리구부터 인산가용화율이 좋았다. 또한 과립연화기 처리구에서 과방중과 당도가 증가됨을 알 수 있었다. 인산가용화 균주 처리구에서 안토시아닌, 명도, 적색도, 황색도가 경핵기와 과립연화기 처리구에서 유의성을 보였으며, 특히 적색도가 향상되어 착색증진 효과가 있었다. 결론적으로 과실특성과 과실품질을 모두 비교하였을 때 과립연화기에 인산가용화 균주를 투입하는 것이 수량성과 품질면에서 가장 효과적이라고 생각된다.

• 한국자원식물학회지
• /
• 제8권2호
• /
• pp.183-188
• /
• 1995

땅두릅 여룹철 연화재배(軟化栽培) 가능성(可能性)을 검토(檢討)하기 위하여 흑색(黑色) PE와 은색(銀色) 단섬유불직포(短纖維不織布)를 이용하여 5월 정식(定植)을 포함하여 6월, 7월, 8월 정식기(定植期)에 대하여 시험(試驗)한 결과(結果)는 다음과 같다. 1. 수확소요일수(收穫所要日數)는 5월 정식(定植)에서 20일(日)이고 7월, 8월 정식(定植)에서는 15일로 단축(短縮)되었으나 생육기간중(生育期間中)의 적산온도(積算溫度)는 $400^{\circ}C$ 범위이었다. 2. 7월 정식(定植)에서 땅두릅 연화수(軟化莖)의 수량(收量)은 고온(高溫)으로 인한 연부현상(軟腐現狀)으로 낮은 경향(傾向)이었다. 3. 각(各) 부위별(部位別) 경도(硬度)는 상위부(上位部)가 연(軟)하고 하위부(下位部)가 단단한 경향(傾向)이고, 저온저장(低溫貯藏) 7일후(日後)에도 신선도(新鮮度)는 유지(維持) 되었다. 4. 5월, 6월 정식재배시(定植栽培時) 18,000천원/ha 이상(以上)의 소득(所得)을 얻을 수 있었다.

• 한국응용과학기술학회지
• /
• 제11권2호
• /
• pp.69-74
• /
• 1994

Durable softening water repellents for nylon fiber were synthesized, using two compounds: quaternized octadecyl methacrylate-2-diethylaminoethyl methacrylate copolymer as a mother resin of water repellent and quaternized fatty carbamide for improving softness and hydrostatic pressure, of which syntheses were studied in the previous papers. They were blended with waxes and emulsifiers in a variety of ratios and synthesized into water repellent PADWC, and it was nylon taffeta treated with and without textile finishing resin. The synthesized water repellents can be used either or without resin. The optimum curing temperature was 150 to 160$^{\circ}C$ and the optimum concentration was 3 to 5wt%. In the independent and conjunct treatment, the water repellency of nylon taffeta samples have no remarkable changes between initial value and that after three times washing, so these prove that the synthesized compounds are durable water repellent. The water repellency of PADWC-3 and -4 were around 90. Also, comparison of crease recovery and tear strength after repelling treatment showed that the synthesized water repellents have a very high softening effect.

• 원예과학기술지
• /
• 제18권3호
• /
• pp.395-398
• /
• 2000

본 연구는 떫은감 "청도반시"를 조기착색과는 9월 21일, 적숙과는 10월 11일에 수확하여 수확시기에 따른 연화정도를 조사하고, 연시제조의 적정온도를 설정하고자 10, 15, $20^{\circ}C$에서의 품질변화를 조사하였다. 경도는 처리온도 15, $20^{\circ}C$에서 처리 2일만에 전체 경도 감소량에 70% 정도 감소되었으며, 6일 이후에는 경도의 감소가 완만하게 되었다. 처리온도 $10^{\circ}C$는 다른 처리온도에 비하여 높은 경도를 나타내어 연시제조에는 효과가 없었다. 가용성탄닌은 수확시기에 관계없이 15, $20^{\circ}C$의 처리구에서 6일째에 급격히 감소하였으나, 무처리구는 가용성탄닌이 약간 감소되었다. 조기수확과의 Hunter 'L', 'b' value는 모든 처리온도에서 2일째까지 증가한 후 감소하였고, 적숙과는 초기부터 감소하기 시작하여 8일째부터는 비교적 일정한 경향을 보였다.

• 한국의류학회지
• /
• 제14권4호
• /
• pp.262-273
• /
• 1990

The purpose of this study is to investigate the softening effect of cellulase-treated cotton fabric and the damage on the fabric which is accompanied by the treatemnt. Cotton fabric is treated with cellulase under various concentrations and time, and the weight loss, hand values (by KES), surface characteristics, moisture regain, tensile strength, copper number and intrinsic viscosity of the treated samples and untreated samples have been compared. The results are as follows: 1. The weight loss of cotton fabric increased as the concentration of cellulase and the treating time increased. 2. The enzyme treatment had little effect on the stiffness of the treated samples but anti- drape stiffness decreased for the treated samples. Fullness and softness of the treated samples increased and crispness decreased with the lowest level reaching after two hours of the treatment for all concentrations. Scrooping feeling of the treated samples increased and flexibility with soft feeling increased as the treating time and the concentration of cellulase increased. 3. Moisture regain of the samples decreased as the treating time and the concentration of the enzyme increased and the treated fabric showed cracks on the fiber surface, and much surface fibers on the fabric have been removed after the treatment. 4. Tensile strength of the samples decreased as the treating time and as the concentration of cellulase increased, and the copper number increased while the intrinsic viscosity decreased as the treating time increased, but cellulase concentration had a little effect.

• 대한토목학회논문집
• /
• 제7권2호
• /
• pp.69-77
• /
• 1987

철근 콘크리트 구조물의 재료적 비선형 해석을 위해 유한요소법을 적용하였다. 2 축응력 상태에서의 콘크리트 거동은 인장균열과 균열사이의 인장증강효과(tension stiffening effect) 그리고 최대압축 강도를 넘어서의 변형연화(strain-softening) 효과를 고려하는 비선형 구성 방정식으로 나타냈다. 콘크리트를 직교성 (orthotropic) 재료로 가정함으로써 비선형 탄성체로 간주하고, 등가일축변형도 개념을 사용한 등가 일축 응력-변형도(equivalent uniaxial stress-strain) 관계식으로 모형화하고, 철근 보강재는 Bauschinger 효과를 갖는 탄소성 변형 경화재료(elasto-plastic strain-hardening material)로 모형화 했다. 평면 응력 상태에서 철근콘크리트 보의 모형화는 각 절점에 2 개의 자유도를 갖는 사각형요소로 모형화하여 적용 시쳤으며, 이로부터 구한 유한요소해석의 결과치를 실험결과치의 중앙처짐, 응력, 변형율 그리고 균열성장과정에 대하여 비교 검토 하였다.

• 열처리공학회지
• /
• 제29권5호
• /
• pp.220-226
• /
• 2016

The mechanical properties of Ti-6Al-4V can be improved by microstructural control through the heat treatment in ${\alpha}+{\beta}$ region. The heat treatment was carried out with a variety of heat treatment temperatures and holding times to find the optimized heat treatment conditions and it was analyzed by linking the microstructural characteristics and mechanical properties. The part of ${\beta}$ phase with $10{\pm}2wt%$ vanadium was transformed into ${\alpha}^{{\prime}{\prime}}$ martensite phase after quenched, so the hardness and tensile properties were decreased below $900^{\circ}C$. The higher the heat treatment temperature is, the smaller is the vanadium-rich region, which leads to transformation into hcp ${\alpha}^{\prime}$ martensite above $900^{\circ}C$. The hardness and tensile properties were improved due to the hard ${\alpha}^{\prime}$ martensite. As the holding times were longer, the hardness and tensile properties decreased below $900^{\circ}C$ because of the softening effect by the grain growth. When varying the holding times above $900^{\circ}C$, the change of mechanical properties was slight because the softening effect of grain growth and the strengthening effect of ${\alpha}^{\prime}$ phase were counteractive. Therefore, the best conditions of heat treatment, which is in the range of $920{\sim}960^{\circ}C$, 40 min, WQ, can effectively improve the mechanical properties of Ti-6Al-4V.

• Current Research on Agriculture and Life Sciences
• /
• 제33권2호
• /
• pp.65-68
• /
• 2015

Hunter's color value "a" in dried-persimmon of table and full ripe fruit was higher than that in unripe fruit. In case of soluble solid content, full ripe fruit was $50^{\circ}Brix$, the highest degree, while unripe fruit was $40^{\circ}Brix$, the lowest degree. PPO activation of unripe fruit was 4.7, which was higher than table-ripe fruit (0.7) and full ripe (1.0). Polyphenol oxidase activation remained even while drying, but there was no difference in PPO activation degree as drying period increased. Total phenol content of unripe fruit was 101.4, which was higher than table-ripe fruit (57.5) and full ripe fruit (67.4). Total phenol content level increased as drying period increased, which was based on fresh weight. Hardness of unripe and table ripe fruit continued to decrease until three weeks during softening. After that, hardness was high and it started drying. However, in full ripe fruit, hardness increased after two weeks and softening was fast during the drying period, and its weight reduction rate was lower than that of unripe and table ripe fruit.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1231-1236
• /
• 2007

This study presents the static and dynamic actuating performances of a bending piezoelectric actuator with a thin sandwiched PZT plate under a static load. The stored elastic energy within the actuators which occurs during a curing process is obtained through a flexural bending test. An actuating performance is evaluated in terms of an actuating displacement at the simply supported condition. The results reveal that an actuator that consists of a top layer having a high elastic modulus and a low coefficient of thermal expansion exhibits a better performance than the rest of actuators due to the formation of the large stored elastic energy within the actuator system. When actuators are excited at the alternating current voltage, the effect of PZT ceramic softening results in a slight reduction in the resonance frequency of each actuator as the applied electric field increases. It is thus suggested that the static and dynamic actuating characteristics of bending piezoelectric actuators with a thin sandwiched PZT plate should be simultaneously considered in controlling their performances.

• 대한치과기공학회지
• /
• 제31권4호
• /
• pp.25-30
• /
• 2009

Zirconia($ZrO_2$) has attracted much attention in science and technology because of its high refractive index, high melting temperature, hardness, low thermal conductivity and corrosion barrier properties. And it is widely used as the dental restoration material because of its esthetic appearance. In this research, we analyzed the particle size and composition of the imported dental porcelain for zirconia. And the glass frit was produced. To decrease the glass transition temperature and softening temperature of the glass frit, $Li_2O$ was added into it and the effect of $Li_2O$ on the firing temperature was researched. Then the glass which contains leucite crystal with a high coefficient of thermal expansion(CTE) was manufactured and it was mixed with the glass frit to control the CTE. The phase composition were analyzed using the X-ray diffraction. The morphologies of the samples were observed by the scanning electron microscope. The 4wt% $Li_2O$-added glass frit has the optimal glass transition temperature and softening temperature. And 6 wt% leucite crystal was mixed with the glass frit to control the CTE. From the experimental results of crystallization, the crystal phase was found only leucite crystal.