• Journal of the Korean Wood Science and Technology
• /
• 제51권1호
• /
• pp.1-13
• /
• 2023

Sengon (Falcataria moluccana Miq.) tree offers a wood of low quality and durability owing to its low density and thin cell walls. This study aimed to improve the properties of sengon wood by making the wood magnetic, producing new functions, and characterizing magnetic sengon wood. Each wood sample was treated using one of the following impregnation solutions: Untreated, 7.5% nano magnetite-furfuryl alcohol (Fe₃O₄-FA), 10% nano Fe₃O₄-FA, and 12.5% nano Fe₃O₄-FA. The impregnation process began with vacuum treatment at 0.5 bar for 2 h, followed by applying a pressure of 1 bar for 2 h. The samples were then tested for dimensional stability and density and characterized using scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM-EDX), Fourier transform infrared spectrometry (FTIR), X-ray diffraction (XRD) analysis, and vibrating sample magnetometry (VSM) analysis. The results showed that the Fe₃O₄-FA impregnation treatment considerable affected the dimensional stability, measured in terms of weight percent gain, anti-swelling efficiency, water uptake, and bulking effect, as well as the density of sengon wood. Changes in wood morphology were detected by the presence of Fe deposits in the cell walls and cell cavities of the wood using SEM-EDX analysis. XRD and FTIR analyses showed the appearance of magnetite peaks in the diffractogram and Fe-O functional groups. Based on the VSM analysis, treated sengon wood is classified as a superparamagnetic material with soft magnetic properties. Overall, 10% Fe₃O₄-FA treatment led to the highest increase in dimensional stability and density of sengon wood.

• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.135-151
• /
• 1982

In order to investigate the effectiveness of Osmose process for the practical treatment of wood this study has been made using water soluble preservatives such as Malenit and chromated zinc chloride. The results obtained in this investigation are as follows: 1. The penetration of Malenit in sapwood has been observed deeper than that of chromated zinc chloride for all species tested in this investigation. 2. The penetration of preservatives applied in soft wood, ie. Pinus densiflora and Larix leptolepis has been observed better results than that of hard wood, i.e., Quercus accutissima and Carpinus laxiflora. 3. The longer stack covering, despite of preservatives applied and size of wood tested, has given better penetration for all species tested, and the fastest diffusion has been occured in 15 days from they day started. Following after 15 days diffusion had gradualy become slower. 4. The length of time needed for effective penetration has taken 45 days for all species tested, reaching twenty millimeters (20mm) in depth in case of Malnit, that means also more than 50% of penetration into sapwood portion. However it has taken 45 days fer Pinus densiflora and Larix leptolepis, reaching fifteen millimeters (15mm) and 60 days for Quercus accutissima and Carpinus laxiflora, reaching same fifteen millimeters in case of chromated zinc chloride, that means also less than 50% (except 50% for Larix) of penetration into sapwood portion. 5. Deeper penetration of preservatives from the wood surface has been observed in the larger wood than the smaller wood for all species tested, although the penetration ratio between the width of sapwood and the length penetrated has been observed smaller in larger wood than smaller wood. 6. The relation between moisture content of wood and the penetration of preservatives into wood tested has shown the linear regression, that is, the more moisture content brought the deeper penetration. 7. Following the result obtained at this investigation osmose process with Malenit applied has indicated as a useable process for the none pressure treatment of wood.

• Journal of the Korean Wood Science and Technology
• /
• 제15권2호
• /
• pp.1-15
• /
• 1987

This experiment was undertaken for the purpose of investigation of relative durability about thirty sorts of the korean native wood and nine sorts of the wood destroying fungi Polystictus versicolor, Irpex consors. Poria vaporaria, Merulius lacrymans, Schizophyllum commune, Trametes pini, Lenzites betulina, Paxillus panuoides by means of a laboratory methods. The results obtained are; (from the table 2 to 10) 1. By measuring the percentage of loss in weight with regard to Polystictus versicolor, the sap wood contained in Junipeus chinesis was calculated at 18.2%, therefore it is much higher durability than any others and the sap wood contained in Pinus densiflora was measured at 44.10%, therefore it is much lower durability than any others. 2. By measuring the percentage of loss in weight with regard to Irpex consors, the heart wood contained in Butula schmidtii was calculated at 1.23%, therefore durability is very high and the heart wood contained in Quercus dentata was calculated at 26.79%, therefore durability is very low. 3. By measuring the percentage of lass in weight with regard to Lenzites betulina, the heart wood contained in Betula schmidtii was calculated at 5.33%, therefore it is much higher durability than any others and the sap wood with regard to Abies holophylla was measured at 45.48%, therefore durability is very low. 4. By measuring the percentage of loss in weight with regard to Poria vaporaria, the sap wood contained in Fraxinus rhynchophylla was calculated at 5.57%, therefore durability is very high and the sap wood contained in Paulownia coreana was calculated at 35.6%, therefore it is much lower durability than any others. 5. By measuring the percentage of loss in weight with regard to Merulius lacrymans, the heart wood contained in Castanea crenata was measured at 0.09% and in the next place, the heart wood contained in Abies holophylla calculated at 0.15% did not decay almost and the sap wood contained in Cornus controversa was measured at 32.88%, therefore it is lower durability than any others. 6. By measuring the percentage of loss in weight with regard to Schizophyllum commune, the sap wood cantained in Junipensis chinensis was calculated at 1.09%, therefore durability is very high and the sap wood contained in Populus deltoides was calculated at 36.87%, it is much lower durability than any others. 7. By measuring the percentage of loss ill weight with regard to Trametes pini, the sap wood contained in Robinia pseudo-acacia was calculated at 1.33%, therefore durability is very high and the sap wood contained in Comus controversa was calculated at 33.19%, it is much lower durability than any others. 8. By measuring the percentage of loss ill weight with regard to Paxillus panuoides. the heart wood contained in Zelkova serrata was calculated at 1.73%, therefore durability is very high and the sap wood contained in Populus deltoides was calculated at 42.30%, therefore durability in very low. 9. By measuring the percentage of loss in weight with regard to Dardalea quercina, the heart wood contained in Castanea crenata was calculated at 0.92%, therefore durability is very high and the sap wood contained in Cornus controversa was calculated at 32.00% therefore durability is very low. The above results are summarized as follows 1. Durability between the heart wood and the soft wood find that it is nonsignificant, while durability is higher heart wood than sap wood. 2. Special sorts including in the element like Castanea cenata, Robinia pseudo-acacia, Juniperus chinensis and heart wood like Betula schmiditii and Styrax obasia are highly durable and soft wood like Cornus controversa, Populus davidiana, Salix koreensis, Celtis jessensis are lowly durable in general. 3. Among the wood destroying fungi Paxillus panuoides is highly durable and as follows. Poria vaporaria, Lenzites betulina and the Daedalea quercina is less in general and Irpex consors, Mersulius lacrymans are a middle degree.

• Journal of the Korean Wood Science and Technology
• /
• 제18권2호
• /
• pp.49-66
• /
• 1990

In order to identify an unknown wood sample native to Korea. the softwood databases(KSWCHUN; Korean SoftWood CHUN) and the hardwood databases(KHWCHUN; Korean HardWood CHUN) had been built. and the new computer searching programs(IDINEX; IDentification INformation EXpress) has been written in Turbo Pascal(V.5.0) and in Macro Assembly(V.5.0). The characters of the data were based on the 74 features of softwood and on the 148 features of hardwood which are a part of new "IAWA list of microscopic features for hardwood identification" published in 1989. For the purpose of this investigation the wood anatomical nature of 25 species of softwood(13 genera of 5 families) and of 112 species of hardwood(57 genera of 31 families) were observed under a scanning electron microscope and light microscope. and a lot of literature used. The IDINEX programs are based on edge-punched card keys. with several improvements. The maximum number of features in the IDINEX is 229. but that is fixed for a given database. Large numbers of taxa are handled efficiently and new taxa easily added. A search may be based on sequence numbers of features. Comparisons are made sequentially by feature and taxon using the entire suite of features specified to produce the list of possible matching taxa. The results are followings. (1) The databases of Korean wood and the searching programs(IDINEX) had been built. (2) The databases of Korean wood could be an information to search an unknown wood. (3) The databases would be valuable. for the new features, which were not mentioned in Korean wood up to the present. were observed in details. (4) The ultrastructures of the cell walls(warty layer) and crystals observed under a scanning electron microscope will be helpful to search an unknown wood in particular. (5) The searching process is more quick and accurate than the others. 6) We can obtain the information on the differences of a species from the other and search an unknown wood using probability. in IDINEX, (7) The IDINEX will be utilized to identify and classify an animal life, vegetable world, mineral kingdom, and so on.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 2000년도 춘계 학술논문발표회 논문집
• /
• pp.174-179
• /
• 2000

목재를 취급하는 사업장에서는 작업시에 발생하는 목재분진과 합께 포롬알데이드 및 소음에 대한 노출이 근로자의 직업병발생에 관여하는 중요한 인자가 된다. 목재의 종류는 크게 두가지로 나눌 수 있으며 이것은 경질목재(hard wood)와 연질목재(soft wood)를 말한다. 근로자가 목재분진에 노출되었을 때 건강에 미치는 영향은 매우 복잡하지만, 특히 경질목재를 사용하는 사람은 코에 대한 영향의 징후가 높다고 알려져 있다. (중략)

• Journal of the Korean Wood Science and Technology
• /
• 제44권6호
• /
• pp.842-851
• /
• 2016

The objective of this study was to improve physical and mechanical properties of soft-inner part of oil palm trunk (S-OPT) after impregnation with phenol formaldehyde (PF) resin and densification by close system compression (CSC) method. Effect of different methods of PF resin impregnation (i.e., no vacuum-pressure, vacuum, and vacuum-pressure) was evaluated. The results showed that PF resin impregnation and CSC significantly improved the physical and mechanical properties of S-OPT up to: (1) 176% in density; (2) 309% in modulus of rupture (MOR); (3) 287% modulus of elasticity (MOE); and (4) 191% in the compressive strength. Physical and mechanical properties of S-OPT showed their best performances when PF resin impregnated with vacuum-pressure method as shown by higher weight gain, density, MOR, MOE, compressive strength, and lower recovery of set due to better penetration of PF resin into S-OPT. Combining PF resin impregnation and densification by CSC method could be a good method to improve physical and mechanical properties of S-OPT.

• Archives of Plastic Surgery
• /
• 제41권2호
• /
• pp.126-132
• /
• 2014

Background Extensive degloving injuries of the extremities usually result in necrosis of the flap, necessitating comprehensive skin grafting. Provided there is a sufficient tool to evaluate flap viability, full-thickness skin can be used from a nonviable avulsed flap. We used a Wood's lamp to determine the viability of avulsed flaps in the operation field after intravenous injection of fluorescein dye. Methods We experienced 13 cases during 16 months. Fifteen minutes after the intravenous injection of fluorescein dye, the avulsed skin flaps were examined and non-fluorescent areas were marked under Wood's lamp illumination. The marked area was defatted for full-thickness skin grafting. The fluorescent areas were sutured directly without tension. The non-fluorescent areas were covered by defatted skin. Several days later, there was soft tissue necrosis within the flap area. We measured necrotic area and revised the flap. Results Among all the cases, necrotic area was 21.3% of the total avulsed area. However, if we exclude three cases, one of a carelessly managed patient and two cases of the flaps were inappropriately applied, good results were obtained, with a necrotic area of only 8.4%. Eight patients needed split-thickness skin grafts, and heel pad reconstruction was performed with free flap. Conclusions A full-thickness skin graft from an avulsed flap is a good method for addressing aesthetic concerns without producing donor site morbidity. Fluorescein dye is a useful, simple, and cost-effective tool for evaluating flap viability. Avulsed flap injuries can be managed well with Wood's lamp illumination and a full-thickness skin graft.

• Journal of the Korean Wood Science and Technology
• /
• 제28권1호
• /
• pp.1-17
• /
• 2000

황철나무와 양황철나무는 전형적인 다습심재(wetwood)로써, 심재 전체가 변재보다 높은 함수유를 나타냈다. 황철나무와 양황철나무의 목부중에 존재하는 결정은 주로 심재중에서도 일부연룬을 따라 또는 착색얼룩을 따라 또는 국소에 집중하여, 수에 가까울수록 많았다. 또한 1연륜 내에서는 만재보다 조재에 많은 경향이 있었다. 심재에서의 결정은 전 종류의 세포에 존재하였으나, 대부분의 결정은 도관과 섬유상가도관에 존재하였다. 수피중에 있는 결정은 내수피에서 외수피까지 비교적 산재하여 존재했다. 양황철나무에서는 잎옹이의 출현빈도가 높았으나 황철나무에서는 그 출현 빈도가 낮았다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.257-263
• /
• 2006

This paper examines the physico-chemical properties and structural features of thio lignin and alcohol lignin preparations extracted from fast-growing poplar wood. The lignin preparations were characterized using UV, IR and alkaline nitrobenzene oxidation methods. The yield was higher in thiolignin due to its preparation from wood under drastic alkaline conditions and almost the total amount of alkaline degraded lignin was precipitated except acid soluble lignin. In case of ethanol lignin, structural modifications were comparatively less and form a cream colored lignin more or less similar to its original natural color. The methoxyl values were higher due to syringyl unit present in hard wood lignin in addition to guaicyl unit present in soft wood. The higher values of methoxyl content of isolated lignin revealed that it was built up of high syringyl units. The elementary analysis, methoxyl group and hydroxyl groups were presented by $C_{9}$ formula indicated that it was made up of phenyl propane monomers. Nitrobenzene oxidation of thio lignin and ethanol lignin yield more or less the chromatograms of similar pattern, except difference in relative percentage. The ultra violet spectra of lignins were quite similar, irrespective of the source and method of isolation. Infrared spectroscopy studies of poplar deltoides, thio and ethanol lignin shown different absorption bands which have been utilized for structural investigations.

• Carbon letters
• /
• 제3권1호
• /
• pp.1-5
• /
• 2002

The regional bio-wastes available in abundance in India were converted into porous carbon by heat treatment at different temperatures from $650-950^{\circ}C$. The wood retain shapes after pyrolysis though shrinkage occured both in axial and radial directions. The shrinkage in radial direction was found to be more than in axial direction in all woods. The density of woods and chars from these at a given temperature has been found to follow linear relationship. Chars were steam activated at temperature $700-800^{\circ}C$ for different times between 45-240 min. Both the temperature and time of activation with steam has a profound effect on surface area. Chars from softwoods like bagasse and castor oil plant were activated at lower temperature, i.e. $700-750^{\circ}C$ whereas hard wood chars have to be activated at higher temperature around $800^{\circ}C$. The morphology of wood as well as of chars has been studied by SEM. The comparison of the two showed that the nature of porosity in chars depends on precursor morphology, nature and physical state of wood and presence of inorganic compounds in the wood. Hard wood results in cross inter connected pores while softwood leads to fibriller structure. The present studies show that activated carbon with reasonably good surface area (${\sim}1000m^2/gm$) can be prepared from soft wood bio-wastes like bagasse and castor oil plant, while surface area ${\sim}1370m^2/gm$ was achieved from hard wood bio waste of pine wood.