• The Journal of the Acoustical Society of Korea
• /
• v.13 no.3
• /
• pp.63-70
• /
• 1994

In this Paper, we propose a new codeword tying algorithm based on a tree structured classfier. The proposed algorithm which can be viewed as a kind of soft decision using statistical properties between codewords and states has an advantage of fast construction, and guarantees a unique optimal solution. Also, it can easily be applied to any speech recognition system based on discrete hidden Markov model (HMM). Experimental results on speaker-independent isolated word recognition show error reduction of $6\%$ for the codebook of size 256 and $9\%$ for 512 size and also HMM parameter reduction of about $20\%$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2766-2770
• /
• 2009

Recently, the Green IT is noticed because of the effects of greenhouse gas emissions, a drain on natural resources and pollution. In this paper, Visible Light Communication (VLC) systems with Turbo Coded scheme using LED is proposed and simulated in an optical wireless channel. As a forward error correction scheme to reduce information losses, turbo coding was employed. To decode the codewords, The Map (Maximum a Posteriori) algorism and SOVA (Soft Output Viterbi Algorithm) is used. The above mentioned schemes are described and simulation results are analyzed. As using turbo codes scheme, BER performance of proposed VLC systems is improved about 5 [dB].

• Journal of Advanced Navigation Technology
• /
• v.13 no.3
• /
• pp.385-392
• /
• 2009

Simplified minimum mean square error (MMSE) detection technique combined with soft interference cancellation(SoIC) is proposed for iterative receivers in multiple antenna systems. To avoid repeated matrix inversions required to obtain the MMSE filter coefficients during the iteration between the soft detector and decoder, simplified matrix inversion techniques are applied to calculate the filter coefficient matrix. Simulation results show that the proposed MMSE detections with SoIC indicate a comparable or slightly degraded detection performance while achieving a significantly reduced complexity as compared to the conventional MMSE detection with SoIC.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1132-1136
• /
• 2005

In this paper, adaptive equalizer receiver for a turbo code direct sequence code division multiple access (DSCDMA) by using least mean square (LMS) adaptive algorithm is presented. The proposed adaptive equalizer is using soft output of decision feedback adaptive equalizer (DFE) to examines the output of the equalizer and the Log- maximum a posteriori (Log-MAP) algorithm for the turbo decoding process of the system. The objective of the proposed equalizer is to minimize the bit error rate (BER) of the data due to the disturbances of noise and intersymbol interference (ISI)phenomenon on the channel of the DS-CDMA digital communication system. The computer program simulation results shown that the proposed soft output decision feedback adaptive equalizer provides a good BER than the others one such as conventional adaptive equalizer, infinite impulse response adaptive equalizer.

• Journal of Periodontal and Implant Science
• /
• v.30 no.2
• /
• pp.483-490
• /
• 2000

The aim of this study was to analyze the reliability of an ultrasonic device(SDM) measuring soft tissue thickness in relation to tooth position, and to find factors which can influence the reliability. The results showed that 1. measurement error was the largest in the maxillary second molar position and the smallest in the mandibular central incisor position. 2. in a box whisker plot, the difference between two measurements was most widely distributed in molar positions. 3. in Pearson correlation analysis, the relationship between two measurements was the highest in the maxillary lateral incisor position and, the lowest in the maxillary second molar, mandibular first and second premolar position. 4. a stepwise multiple regression analysis could explain the difference of two measurements with various independent variables in 29.7% (P<0.0001). Gingival thickness was the only variable influencing the measurement difference in a statistically significant level(P<0.0001). It can be concluded that its high reliability, ease to use and patient comfort justified the application of the SDM in measurement of soft tissue thickness.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42 no.5
• /
• pp.133-143
• /
• 2000

A large scale field test of prefabricated vertical drains was performed to anayze the effect of parameters of the very soft clay at a test site. compression index and the coefficient of horizontal consolidation obtained by back-analysis of settlement data were compared with those obtained by means of laboratory tests. Hyperbolic method, Asaoka meoth and curve fitting method were used to compute final settlement of coefficient of consolidation. The relationships of settlement measurement(Sm) versus design settlement(St) and the measurement consolidation ratio(Um) versus design consolidation (Ut) were shown as Sm=(1.0~1.1) St , Um=(1.13~1.17) Ut at 1.0m spacing of drain and Sm=(0.7~0.8)St, Um= (0.92~0.99) Ut at 1.5 m spacing of drain, respectively . The relationships of the field compression index(CcField) and virgin compression index(vcc lab) were shown as Ccfield =(1.0~1.2)vcc lab . But it was nearly within the same range when considering the error factor with the determination method of virgin compression index and the prediction back-analysis of the settlement data was larger than the coefficient of vertical consolidation, and the ratio of consolidation coefficient (Ch/Cv) was Ch =(2.4~2.9) Cv , Ch=(3.4~4.2) Cv at 1.0m and 1.5m spacing of drain, respectively.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.715-719
• /
• 2009

In this study, a method to predict the consolidation behavior of soft clays and marine clays was developed by combining the equation of Terzaghi's 1-dimensional consolidation and CPTu dissipation. The special attention was given to the consolidation anisotropy due to the difference between 1-D consolidation and radial consolidation of CPTu dissipation. The analysis combining two equations enables direct application of CPTu results. And above all it doesn't require to sample undisturbed specimens and determine consolidation coefficient which is both costly and time consuming and often contains measuring error. It is also advantageous that CPTu test can be carried out any position and any depth. Clays typically have a greater horizontal permeability, $k_h$, than vertical permeability, $k_v$, and the coefficient of consolidation in the horizontal direction is generally higher than the vertical direction. Various data of horizontal and vertical consolidation coefficient ratio were collected and analyzed to develop and verify the method.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.4
• /
• pp.24-32
• /
• 2012

Of many approaches to reduce motion analysis errors, the compensation method of anatomical landmarks estimates the position of anatomical landmarks during motion. The method models the position of anatomical landmarks with joint angle or skin marker displacement using the data of the so-called dynamic calibration in which anatomical landmark positions are calibrated in ad hoc motions. Then the anatomical landmark positions are calibrated in target motions using the model. This study applies the compensation methods with joint angle and skin marker displacement to three lower extremity motions (walking, sit-to-stand/stand-to-sit, and step up/down) in ten healthy males and compares their performance. To compare the performance of the methods, two sets of kinematic variables were calculated using different two marker clusters, and the difference was obtained. Results showed that the compensation method with skin marker displacement had less differences by 30~60% compared to without compensation. And, it had significantly less difference in some kinematic variables (7 of 18) by 25~40% compared to the compensation method with joint angle. This study supports that compensation with skin marker displacement reduced the motion analysis STA errors more reliably than with joint angle in lower extremity motion analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.9
• /
• pp.738-745
• /
• 2012

This paper proposes an approximated soft decision demapping algorithm with low computational complexity for coded 4+12+16 amplitude phase shift keying (APSK) in an additive white Gaussian noise (AWGN) channel. To derive the proposed algorithm, we approximate the decision boundaries for 4+12+16 APSK symbols, and then decide the log likelihood ratio (LLR) value for each bit from the approximated decision boundaries. Although the proposed algorithm shows about 0.6~1.1dB degradation on the error performance compared with the conventional max-log algorithm, it gives a significant result in terms of the computational complexity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7A
• /
• pp.568-573
• /
• 2009

This paper presents a step-down DC-DC converter with On-chip Compensation for battery-operated portable electronic devices which are designed in O.13um CMOS standard process. In an effort to decrease system volume, this paper proposes the on chip compensation circuit using capacitor multiplier method. Capacitor multiplier method can minimize error amplifier's compensation capacitor size by 10%. It allows the compensation block of DC-DC converter be easily integrated on a chip and occupy less layout area. But capacitor multiplier operation reduces DC-DC converter efficiency. As a result, this converter shows maximum efficiency over 87.2% for the output voltage of 1.2V (input voltage : 3.3V), maximum load current 500mA, and 25mA output ripple current. This voltage mode controled buck converter has 1MHz switching frequency.