• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.3
• /
• pp.237-254
• /
• 2019

This study is focused on the effect of sodium stearate, which is a hydrophilic gelling agent affecting on the hardness of O/W solid sunscreen cosmetic. The sunscreen of the O/W (oil in water) type is stable, good in use, and relatively easier to stabilize than the sunscreen of the W/O (water in oil) type. Methods for increasing the stability by using emulsifiers, electrolytes, and wax or oil have been studied for solid sunscreen. This study was intended to develop a solid sunscreen stabilized by increasing the hardness using sodium stearate as an O/W type containing more than 40% moisture. Response surface methodology (RSM) was used to analyze the factors affecting the hardness of cosmetics, and sodium stearate, polyol and oil were used for each factor. The hardness and the reaction value was measured using a rheometer. As a result, sodium stearate showed a meaningful value (p < 0.05) among the three factors affecting hardness. In addition, the use of sodium stearate as a hydrophilic gelling agent increased the usability and stability of the solid sunscreen.

• Applied Chemistry for Engineering
• /
• v.10 no.8
• /
• pp.1216-1220
• /
• 1999

Different amounts of zinc stearate were incorporated as a plasticizer into poly(styrene-co-sodium methacrylate) ionomers prepared by bulk-suspension plymerization and neutralization with sodium hydroxide and effects of the zinc stearate on the thermal and rheological properties were investigated. It was obseved that the crystallization of zinc stearate in the ionomers were partially suppressed depending on the content of ionic moieties. It is postulated that the ionic moieties dissolved zinc stearate and suppressed crystallization of the zinc stearates. We speculated that 0.4~0.6 mole of zinc stearate was dissolved by one mole of the ionic moiety. Poly(styrene-co-sodium methacrylate) containing only the dissolved zinc stearates showed typical rheological properties of homogeneous systems in Cox-Mertz plots. However, poly(styrene-co-sodium methacrylate) containing crystallizable zinc stearates as well as dissolved ones showed typical rheological properties of heterogeneous systems.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.5
• /
• pp.303-311
• /
• 2008

Highly hydrophobic lubricants including magnesium stearate may hinder water penetration into the tablet core resulting in delayed disintegration of fast disintegrating tablets. Alternative lubricants with equivalent lubricating properties may need to be incorporated into the tablet formulations. Sodium stearyl fumarate, glyceryl behenate and polyethylene glycol were evaluated regarding the tablet ejection energy, mechanical strength and disintegration time using Texture analyzer (TA). Resulting tablets were also compared with different particle sizes of granules and various compression forces. Among the tested lubricants, sodium stearyl fumarate was less sensitive to mixing time and also showed better or competitive tablet properties. During the experiments, TA was found to be very useful tool to investigate the tablet properties.

• Journal of the Korean Chemical Society
• /
• v.55 no.2
• /
• pp.163-168
• /
• 2011

The variations of molar conductivity of various surfactants such as sodium caprylate, sodium laurate, sodium palmitate, sodium stearate, sodium oleate, sodium dodecyl sulphate, and lithium dodecyl sulphate with concentrations of the surfactants for each of the solutions consisting of mixtures of varying concentrations of N-methyl acetamide in water at constant temperature of $30{\pm}0.2^{\circ}C$ were studied. The critical micelle concentration (CMC) for each surfactant is measured. It is found that the CMC values in mixtures of N-methyl acetamide and water solutions of various surfactants are lower than the CMC values in water, and the driving force for micelle formation correlates with solvophobicity. The surfactant-solvent interactions that drive amphiphilic self-organization in N-methyl acetamide in water are discussed. Thermodynamic parameters were evaluated for micellar system to explain the results.

• Journal of Pharmaceutical Investigation
• /
• v.32 no.2
• /
• pp.95-101
• /
• 2002

Matrix tablets of nifedipine (NP) were prepared with Eudragit, diluent (lactose or Ca. phosphate) and Mg. stearate employing two different preparation methods (wet granulation and direct compression) to develop its sustained-release dosage forms. The effects of various formulation factors on the dissolution rate of the drug were investigated. Dissolution test was studied in pH 6.8 phosphate buffer containing 1% sodium lauryl sulfate using the paddle method. Formulation factors were the type and content of Eudragit, the type of diluent and the tablet preparation method. The optimum formula of NP matrix tablet, which resulted in a similar dissolution profile to that from Adalat Oros used as a reference, was 30 mg NP, 10% Eudragit RS, 2% Mg. stearate and an adequate quantity of lactose to yield 500 mg weight using the wet granulation method.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1997.04a
• /
• pp.118-118
• /
• 1997

Solid dispersions were used to increase the dissolution rate of biphenyl dimethyl dicarboxylate (DDB) in water, with the ultimate goal of optimizing its bioavailability when incoporated into pharmaceuticals. Carriers used were Kollidon 30, Kollidon VA 64, 2-hydroxypropyl-${\beta}$-cyclodextrin (HPCD), sodium salicylate or sodium benzoate. DDB solid dispersions were prepared at drug to carrier proportions ranging from 1 : 5 to 1 : 20 (w/w) by solvent evaporation method. DDB tablets (7.5 mg) were prepared by compressing the powder mixture composed of solid dispersions, lactose, corn starch, crospovidone and magnesium stearate using a single-punch press. DDB capsules (7.5 mg) were prepared by filing the mixture into empty hard gelatin capsules (size #1). Dissolution studies of DDB from powdered solid dispersions, tablets and capsules were performed in 900 $m\ell$ of water at 100 rpm and 37$^{\circ}C$ by the paddle method. The dissolved amount was assayed by HPLC and expressed as the mean(%)of three determinations.

• Korean Chemical Engineering Research
• /
• v.59 no.2
• /
• pp.219-224
• /
• 2021

Ion flotation is an efficient method to remove metal ions from aqueous solution. In this work, ion flotation was applied to calcium removal from aqueous solution. The parameters used included sodium stearate (SS) and sodium dodecyl sulfate (SDS) as collectors, 1-butanol and 1-propanol as frothers, pH, and air-flow rate. An L16 orthogonal array was chosen according to the mentioned factors and levels, and experimental tests were conducted according to the Taguchi orthogonal array. The results showed that all of the factors except one had significant effect on the flotation performance. The percentage contribution of parameters showed that type of frother and type of collector made the greatest (43.14%) and the lowest (9.86%) contribution, respectively. In optimal conditions, the recovery of Ca (II) ion was 45.67%. Also, the results illustrated that the Taguchi method could predict calcium removal from aqueous solution by ion flotation with 2.63%. This study showed that the use of ion flotation was an effective method for Ca (II) ion removal from aqueous solution.

• Journal of the Korean Society for Heat Treatment
• /
• v.37 no.1
• /
• pp.16-22
• /
• 2024

The conventional degreasing process involves removing oil and contaminants at temperatures above 80℃, resulting in excessive energy consumption, increased process costs, and environmental issues. In this study, we aimed to find the optimal degreasing conditions for the pre-treatment process of electro-galvanizing cold-rolled steel sheets, conducted efficiently at room temperature without the need for a separate heating device. To achieve this, we developed a room temperature degreasing solution and a brush-type degreasing tool, aiming to reduce energy consumption and normalize the decrease in degreasing efficiency caused by temperature reduction. Alkaline degreasing solution were prepared using KOH, SiO₂, NaOH, Na₂CO₃, and Sodium Lauryl Sulfate, with KOH and NaOH as the main components. To enhance the degreasing performance at room temperature, we manufactured additives including sodium oleate, sodium stearate, sodium palmitate, sodium lauryl sulfate, ammonium lauryl sulfate, silicone emulsion, and EDTA-Na. Room temperature additives were added to the alkaline degreasing solution in quantities ranging from 0.1 to 20 wt.%, and the uniformity of degreasing and the adhesion of the galvanized layer were evaluated through Dyne Test, T-bending Test, OM, SEM, and EDS analyses. The results indicated that the optimal degreasing solution composition consisted of NaOH (30 g/L), Na₂CO₃ (30 g/L), SLS (6 g/L), and room temperature additives (≤1 wt%).

• Journal of Pharmaceutical Investigation
• /
• v.41 no.4
• /
• pp.217-225
• /
• 2011

The aim of this work was to prepare porous osmotic pump tablets for controlled delivery of Aceclofenac. Aceclofenac solid dispersion was prepared to improve the solubility by using the drug - carrier (Mannitol) ratio of 1:1. The osmotic pump tablets were prepared using the solid dispersed product of Aceclofenac. The formulation contains potassium chloride as osmotic agent, cellulose acetate as semipermeable membrane, poly ethylene glycol (PEG 4000) as pore former and sodium lauryl sulphate (SLS) as solubility enhancer. The formulations were designed by the general factors such as osmotic agent and pore former. All formulations were evaluated for various physical parameters and, the in vitro release studies were conducted as per USP. The drug release kinetic studies such as zero order, first order, and Higuchi and Korsmeyer peppas were determined and compared. All the formulations gave more controlled release compared to the marketed tablet studied. Numerical optimization techniques were applied to found out the best formulation by considering the parameter of in vitro drug release kinetics and dissolution profile standards. It was concluded that the porous osmotic pump tablets (F7) composed of Aceclofenac solid dispersion/Potassium chloride/Lactose/Sodium lauryl sulphate/Magnesium Stearate (400/40/95/10/5, mg/tab) and coating composition with Cellulose acetate/ PEG 4000 (60/40 %w/w) is the most satisfactory formulation. The porous osmotic pump tablets provide prolonged, controlled, and gastrointestinal environment-independent drug release.

• Journal of Pharmaceutical Investigation
• /
• v.20 no.1
• /
• pp.7-12
• /
• 1990

In case of the slowly disintegrating tablets such as enzyme preparations, disintegration time (DT) may be the important factor in formulating those preparations. The effects of tablet hardness, lubricants and disintegrants on DT were investigated in this approach. Disintegration time was significantly affected by disintegrants, moderately by lubricants, but not by tablet hardness. The effect was in the order of magnesium stearate >talc, PEG, sodium benzoate in case of lubricants, and of Ac-Di-Sol>LHPC>Primogel >Kollidon in case of disintegrants. Because lubricants and disintegrants influenced the tablet hardness and DT profile showed complicated pattern, it should be remembered that all factors mentioned above should be simultaneously considered in the formulation of enzyme tablets.