• Journal of the Korean Ceramic Society
• /
• v.31 no.7
• /
• pp.723-730
• /
• 1994

Stable aqueous dispersion of magnetite colloid was obtained by allowing a fatty acid, such as nonanoic acid, decanoic acid and undecanoic acid, dissociated with NH4OH solution to adsorb on the monomolecular adsorption of oleate. To obtain a stable dispersion, added amounts of sodium oleate and nonanoic acid for magnetite 20g were more than 2.63$\times$10-2 mol and 0.04 mol respectively. In this colloid, good dispersions of magnetite which is sterically stabilized in aqueous system were achieved about pH 7.7. Water-based magnetic fluids using in this study were able to redisperse to water-based magnetic fluids by adding NH4OH solution to dried water-based magnetic fluid powders. Changing a magnetic fluid carrier such as kerosene was also attemped by adding kerosene to dried water-based magnetic fluid powders. In this study, we can obtain a kerosene-based magnetic fluids using drying process.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2367-2370
• /
• 2014

"Cat's eye"-shaped $[^{57}Co]CoO@SiO_2$ core-shell nanostructure was prepared by the reverse microemulsion method combined with radioisotope technique to investigate a potential imaging agent for a single photon emission computed tomography (SPECT) in nuclear medicine. The core cobalt oxide nanorods were obtained by thermal decomposition of $Co-(oleate)_2$ precursor from radio isotope Co-57 containing cobalt chloride and sodium oleate. The $SiO_2$ coating on the surface of the core cobalt oxide nanorods was produced by hydrolysis and a condensation reaction of tetraethylorthosilicate (TEOS) in the water phase of the reverse microemulsion system. In vivo test, micro SPECT image was acquired with nude mice after 30 min of intravenous injection of $[^{57}Co]CoO@SiO_2$ core-shell nanostructure.

• Journal of the Korean Ceramic Society
• /
• v.27 no.1
• /
• pp.109-117
• /
• 1990

Magnetite for Water-based ferrofluid was synthesized by air oxidation of aqueous suspension in the pH range 7-12 at $65^{\circ}C$. The optimum condition of magneite formation was delineated by examining various physicochemcial properties such as Fe2+ content, phase characteristics, MHC and $\sigma$max. The point of zero charge of iron oxide powders obtained at various pH conditions were correlated with the oxidation state of Fe in the iron oxide. The magnetite powder prepared at pH 9 ws dispersed using sodium oleate and sodium dodecylbenzenesulfonate (SDBS) as dispersants, and the dispersion characteristics of the magnetite ferrofluid were examined by means of the fraction of solid dispersed, zeta potential data and FT-IR spectrum. A simple calculation on the potential energy of two interacting magnetite particles showed that the dispersion stability was directly correlated with height of the potential energy barrier or the shape of zeta potential.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.9 no.3
• /
• pp.53-61
• /
• 1985

This paper has been studied on the method of washing without any damage on wool, namely foam washing method. Effect of washing was obtained with experimental equipment manufactured by way of trial. but some deflects were found that the volume of detergent solution and blow ratio changed with time passes by. This difficulties should be improved by farther studies. The solution mixed with sodium oleate ($0.5\%$) and sodium carbonate ($0.3\%$) was found suitable for detergent solution, and under the conditions of washing temperature at $50\~60^{\circ}C$ and washing time for 5 minutes, the washing effect was obtained good. Desoaping treatment with $Na_2CO_3$ solution after washing might be thought to be necessary, and from the scanning electron micrographs (SEM), no damage on wool and wool sureface washed was, observed. From the results of this study foam washing of wool may be expected to be very effective.

• Journal of the Korean Chemical Society
• /
• v.38 no.9
• /
• pp.667-675
• /
• 1994

The precipitate flotation using $La(OH)_3$ as a coprecipitant was studied for the simultaneous determination of trace three elements in a sea water. Several experimental conditions such as pH, coprecipitant and surfactant were investigated with an artificial sea water. To remove the influence of Cr(VI) the Cr(VI) was reduced to Cr(III) using $NaBH_4$ prior to the flotation. Trace amounts of Cu(II), Co(II) and total Cr in 1.0 l sea water was coprecipitated together with the precipitation of $La(OH)_3$ in the solution of pH 9.8 adjusted with 3.OM NaOH solution. The precipitate was floated by using a mixed surfactant (1 to 8 of each 0.5% ethanolic sodium oleate and sodium dodecylsulfate solution) by bubbling a nitrogen gas. The floats was separated and filtrated from the mother liquor by suction. The precipitate was dissolved in 7.0 M $HNO_3$ solution and then marked to 25.0 ml with a deionized water. These elements were determined by graphite fumace atomic absorption spectrophotometry. This method was applied to determine the elements in the sea water of the Eastern and Western coasts. And the recoveries were over 90.0% in the samples into which given amounts of the analyte elements were spiked.

• Journal of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.389-396
• /
• 1991

The pre-concentration and determination of ultratrace arsenic in water samples was studied by the precipitate flotation technique. The arsenic in 1.0l of water sample, in which all suspended materials were filtered out, was coprecipitated together with La(OH)$_3$ precipitates at pH 8.5${\pm}$0.1. After the precipitate was made to be hydrophobic by adding mixed surfactant of 1 : 8 mole ratio of sodium oleate and sodium dodecyl sulfate, it was floated with the aid of tiny bubbles of nitrogen gas in a flotation cell. The floated precipitate was quantitatively collected on a micropore glass filter by the suction, dissolved with small volume of 1.0M sulfuric acid, and accurately diluted to 25.00ml with a de-ionized water. Total arsenic was spectrophotometrically determinated by forming silver diethyldithiocarbamate complex of arsine generated from arsenic in the concentrated solution. The calibration curve was linear up to 20ng/ml in the original solution. Analytical results showed that contents of arsenic in a campus wastewater and a river water were 8.2ng/ml and l.0ng/ml, respectively, and their recoveries were 93${\%}$ and 90${\%}$ in water samples which a given amount of arsenic was added into. From above result, it could be concluded that this method was applicable to the determination of arsenic in various kinds of water at low ng/ml levels.

• Journal of the Korean Society for Heat Treatment
• /
• v.37 no.1
• /
• pp.16-22
• /
• 2024

The conventional degreasing process involves removing oil and contaminants at temperatures above 80℃, resulting in excessive energy consumption, increased process costs, and environmental issues. In this study, we aimed to find the optimal degreasing conditions for the pre-treatment process of electro-galvanizing cold-rolled steel sheets, conducted efficiently at room temperature without the need for a separate heating device. To achieve this, we developed a room temperature degreasing solution and a brush-type degreasing tool, aiming to reduce energy consumption and normalize the decrease in degreasing efficiency caused by temperature reduction. Alkaline degreasing solution were prepared using KOH, SiO₂, NaOH, Na₂CO₃, and Sodium Lauryl Sulfate, with KOH and NaOH as the main components. To enhance the degreasing performance at room temperature, we manufactured additives including sodium oleate, sodium stearate, sodium palmitate, sodium lauryl sulfate, ammonium lauryl sulfate, silicone emulsion, and EDTA-Na. Room temperature additives were added to the alkaline degreasing solution in quantities ranging from 0.1 to 20 wt.%, and the uniformity of degreasing and the adhesion of the galvanized layer were evaluated through Dyne Test, T-bending Test, OM, SEM, and EDS analyses. The results indicated that the optimal degreasing solution composition consisted of NaOH (30 g/L), Na₂CO₃ (30 g/L), SLS (6 g/L), and room temperature additives (≤1 wt%).

• Journal of the Korean Chemical Society
• /
• v.37 no.3
• /
• pp.327-333
• /
• 1993

A method was developed for the determination of trace elements in seawater by precipitate flotation preconcentration and subsequent flame atomic absorption detection. In order to quantitatively coprecipitate trace ions such as Cd(II), CuI(II), Fe(III), Mn(II), Pb(II) and Pd(II), 2.0 ml of 1.0M cerium(III) solution was added to 1.0l of seawater and the pH was adjusted to 9.5 with 5.0 M sodium hydroxide solution while stirring with a magnetic stirrer. The precipitate was floated with the aid of surfactant solution (1.0 ml of 0.3% sodium oleate) by bubbling nitrogen gas through a porous (No. 4) fritted glass disk. The floats was collected in a small Erlenmeyer flask by suction. The washed precipitate was dissolved in 8.0 M nitric acid and marked with deionized water in the volumetric flask of 10.0 ml. The analyte was determined by measuring the atomic absorbances in 100-fold concentrated solution. Above all analytes in Kangnung (East Sea) and Kanghwado (West Sea) sea waters were found to be under the detection limit of this method. The recoveries of over 92% for all analytes spiked into seawater samples showed that this method was applicable to the analysis of real seawater.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.741-744
• /
• 2000

The removal of colours from aqueous solution and/or dispersions has been studied by dispersed-air flotation, in a semi-batch column. Two colours were used for the experiments: Basic Yellow 28 (basic) and Direct Orange 31 (basic). All two were effectively removed by flotation within 8 min. Sodium dodecyl sulfate, sodium oleate and amines were found to be effective as collectors in the removal of colour, which was found to be related to the pH of the solution and the amount of collector added to it, with high collector dosages causing the process to become pH-independent.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.7
• /
• pp.582-588
• /
• 1995

The preconcentration and determination of trace Cd(Ⅱ), Cu(Ⅱ), Pb(Ⅱ), Mn(Ⅱ) and Zn(Ⅱ) in water samples were studied by the precipitate flotation using La(OH)3 as a coprecipitant. The analytes were quantitatively coprecipitated by adding 3.0 mL of 0.1 M La(Ⅲ) solution in a 1,000 mL water sample and adjusting the pH to 9.5 with NaOH solution. After the addition of the 1:8 mixed surfactant solution of each 0.1% sodium oleate and sodium lauryl sulfate, the solution was stirred with a magnetic stirrer for 10 minutes. The precipitates were floated to the surface by bubbling with nitrogen gas and collected in a small sampling bottle. The precipitates were dissolved in nitric acid and then the solutions were diluted to 25.00 mL with a deionized water. The analytes were determined by flame atomic absorption spectrometry. This procedure was applied to the waste water analysis. This technique was simple, convenient and especially rapid for the analysis of a large volume of sample. And also, from the recoveries of better than 92% which were obtained from real samples, this method could be judged to be applicable to the preconcentration and quantitative determination of trace elements in water samples.