• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.4
• /
• pp.424-431
• /
• 2003

The evaporation cooling phenomenon of a droplet containing a surfactant on a heated surface has been studied experimentally. The two kinds of heater modules made of brass and Teflon$^{TM}$ were tested to investigate the cooling characteristics of droplet. Solutions of water containing Sodium Lauryl Sulfate(0 ppm, 100 ppm, 1000 ppm) were tested in the experiments. The results showed that the contact angle decrease as the concentration of surfactant increases. The tendency did not very with different heated solid materials. As initial temperature of the heated surface becomes high, time averaged heat flux increases and evaporation time decreases with the denser concentration of surfactant. Therefore, water with denser concentration of surfactant could be effective to cool flammable materials. However, the effect of surfactant becomes low as the material temperature is higher than the boiling temperature of water.

• Journal of the Korean Ceramic Society
• /
• v.35 no.12
• /
• pp.1280-1285
• /
• 1998

Foaming method is presented the preparation of porous materials from high-concentrated kaolin silica and flyash slurries. The slurries were foamed dried and sintered respectively. The porosity of sintered ma-terials was about 70-75% Mean pore-size was the range of 70-150$\mu\textrm{m}$ and pore structure was continuous Sodium lauryl sulfate anionic surfactant was used as a foaming agent. The foaming ability and the froth sta-bility were increased with increasing the concentration of the foaming agent. But the size of the constituent bubble of froth after foaming process was not affected by the concentration of the foaming agent. These results showed that the mean pore-size of sintered materials was closely related to the froth stability which is related to the change of bubble-size during the drying process.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.94-97
• /
• 2008

현재 전주 국내에서는 전주에 대한 관심이 조금씩 증가하는 추세지만 그 활용 영역은 많지 않다. 최근들어 휴대폰 관련 부품과 LCD디스플레이의 핵심부품인 도광판 사출금형에 집중되어 있다. 본 연구에서는 반도체 웨이퍼 절단용 블레이드 제작을 목표로 Ni 전주도금층에 조밀하게 $Al_2O_3$를 분산시키는데 목표를 삼았다. 전주(electroforming)를 이용한 Ni-$Al_2O_3$를 첨가한 설파민산 니켈욕에 Surfactant의 양을 조절하며 Sodium Lauryl Sulfate의 첨가량이 많아질수록 Nickel 전주도금층 표면에 $Al_2O_3$는 접착되어지지 않고, 도금층의 두께는 두꺼워졌다. Surfactant의 첨가로인하여 Ni 전주도금층의 표면 장력이 감소하여 $Al_2O_3$를 감싸고 Ni 전주도금층이 성장하여야하는데 교반하는 과정에서 $Al_2O_3$ 입자들이 용액의 흐름에 따라 떨어져 나갔다.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.1
• /
• pp.50-56
• /
• 1998

A solvent sublation was studied for the determination of trace Cd, Co, Cu and Ni in water samples. Ammonium pyrrolidine dithiocarbamate (APDC) was used as a complexing agent. Experimental conditions such as pH of solution, amounts of APDC, the type and amount of surfactant, the type of solvent, etc. were optimized for the effective sublation of analytes. After metal-PDC complexes were formed in sample solutions of pH 2.5, the precipitate-type complexes were floated in a flotation cell with an aid of sodium lauryl sulfate as a surfactant and by bubbling with nitrogen gas. The precipitates were dissolved and separated into the surface layer of methyl iso-butyl ketone (MIBK). The analytes preconcentrated were determined by a graphite furnace atomic absorption spectrophotometry (GF-AAS). Extractability of each element was 88% for Cd(Ⅱ), 86% for Co(Ⅱ), 95% for Cu(Ⅱ) and 76% for Ni(Ⅱ), respectively. And this procedure was applied to the analysis of real samples. From the recoveries of more than 92%, it was concluded that this method could be simple and applicable for the determination of trace elements in various water samples of a large volume.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.4
• /
• pp.431-435
• /
• 1999

An organic precipitate flotation of Cd(Ⅱ) and Pb(Ⅱ) was investigated by the coprecipitation with lanthanum 8-hydroxyquinolinate. Trace amounts of Cd(Ⅱ) and Pb(Ⅱ) with a significantly large amount of La(Ⅲ) were simultaneously precipitated in a 1,000 mL sample solution with the ethanolic 8-hydroxyquinoline solution. The pH was adjusted to 9.0 with 2 M ammonia solution. The precipitates were floated with the aid of tiny nitrogen bubbles and supported by the stable foam layer of sodium lauryl sulfate. The floats were collected on the fritted glass filter by a suction. The material collected was dissolved with 5.0 mL of ethanol and 1.5 mL of concentrated nitric acid, and then diluted to 25.0 mL with a deionized water. The analytes were determined by a flame atomic absorption spectrophotometry. The recoveries of the analytes spiked in the sample were 94.8% for Pb(Ⅱ) and 92.0% for Cd(Ⅱ). This flotation technique is simple and rapid, and also applicable to the determination of trace Cd(Ⅱ) and Pb(Ⅱ) at lew ppb levels.

• Food Science and Preservation
• /
• v.4 no.1
• /
• pp.45-51
• /
• 1997

In our studies on the role of $\beta$-galactosidase in fruit softening, significant difficulty, was encountered in our attempts to extract RNA from persimmon(Diospyros kaki L. cv. Fuyu) fruit due to astringency and tannin content. Initial, unsuccessful RNA extractions involved methods using guanidinium isothiocyanate/CsCl with and without polyvinylpyrrolidone(PVP), phenol/sodium lauryl sulfate(SDS), guanidinium hydrochloride, as well as polysomal RNA purification method that used 0.2 M Tris-HCI (pH 9.0) containing KCI, Mg-acetate, EDTA, $\beta$-mercaptoethanol, and sucrose. A method was devised which employed treatment of fruit with CO2 gas to diminish astringency prior to RNA extraction, followed by extraction of tissue powders with Proteinase K extraction buffer containing PVP and ascorbate at an alkaline pH. This procedure resulted in the removal of tannins and other polyphenolics and extraction of relatively large amount of high-quality RNA suitable for cDNA library construction and polymerase chain reaction(PCR). Futhermore, the procedure does not use the toxic and corrosive chemical guanidinium isothiocyanate or require ultracentrifugation.

• The Korean Journal of Physiology and Pharmacology
• /
• v.17 no.1
• /
• pp.9-13
• /
• 2013

The aim of the present study was to examine the effect of micellar systems on the absorption of beta-lapachone (b-lap) through different intestinal segments using a single-pass rat intestinal perfusion technique. B-lap was solubilized in mixed micelles composed of phosphatidylcholine and sodium deoxycholate, and in sodium lauryl sulfate (SLS)-based conventional micelles. Both mixed micelles and SLS micelles improved the in situ permeability of b-lap in all intestinal segments tested although the mixed micellar formulation was more effective in increasing the intestinal absorption of b-lap. The permeability of b-lap was greatest in the large intestinal segments. Compared with SLS micelles, the effective permeability coefficient values measured with mixed micelles were 5- to 23-fold higher depending on the intestinal segment. Our data suggest that b-lap should be delivered to the large intestine using a mixed micellar system for improved absorption.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.7
• /
• pp.582-588
• /
• 1995

The preconcentration and determination of trace Cd(Ⅱ), Cu(Ⅱ), Pb(Ⅱ), Mn(Ⅱ) and Zn(Ⅱ) in water samples were studied by the precipitate flotation using La(OH)3 as a coprecipitant. The analytes were quantitatively coprecipitated by adding 3.0 mL of 0.1 M La(Ⅲ) solution in a 1,000 mL water sample and adjusting the pH to 9.5 with NaOH solution. After the addition of the 1:8 mixed surfactant solution of each 0.1% sodium oleate and sodium lauryl sulfate, the solution was stirred with a magnetic stirrer for 10 minutes. The precipitates were floated to the surface by bubbling with nitrogen gas and collected in a small sampling bottle. The precipitates were dissolved in nitric acid and then the solutions were diluted to 25.00 mL with a deionized water. The analytes were determined by flame atomic absorption spectrometry. This procedure was applied to the waste water analysis. This technique was simple, convenient and especially rapid for the analysis of a large volume of sample. And also, from the recoveries of better than 92% which were obtained from real samples, this method could be judged to be applicable to the preconcentration and quantitative determination of trace elements in water samples.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.4
• /
• pp.39-42
• /
• 2011

The composite electroplating is accomplished by adding inert materials during the electroplating. Permalloy is the term for Ni-Fe alloy and it is used for industrial applications due to its high magnetic permeability, surface wear resistance, corrosion protection. Microhardness for microdevices is enhanced after composite coating and it increases the life cycle. However, the hydroxyl group on the silica makes their surface susceptible to moisture and it causes the silica nanoparticles to be agglomerated in the aqueous solution. The agglomeration problem causes poor dispersion which eventually interrupts uniform deposition of silica nanoparticles. In this study, the dispersion of silica nanoparticles in the permalloy electroplated layer is reported with variation of additives and current densities. The optimum current density was 20 $mA/cm^2$ and the silica content was 9 at% at $50^{\circ}C$. The amount of silica nanopowder codeposition and surface morphologies were influenced with variation of additives. In the bath, smooth surface morphology and relatively high contents of silica nanopowder codeposition were obtained with addition of sodium lauryl sulfate.

• Journal of Life Science
• /
• v.28 no.1
• /
• pp.110-115
• /
• 2018

This study was conducted to investigate the potential of medicinal plants as oral health materials derived from natural products. Among the extracts from 200 medicinal plants grown in Nepal, Laos, Mongolia, Bangladesh, Vietnam, and China, stem extracts from Diospyros malabarica (1 mg/disc) showed the highest antibacterial activity against Porphyromonas gingivalis ATCC33277 and Streptococcus mutans ATCC25175. The D. malabarica stem extracts showed antibacterial activity similar to chlorhexidine, sodium lauryl sulfate, and triclosan, which were used as a positive control, as well as higher antibacterial activity against S. mutans ATCC25175 than P. gingivalis ATCC33277. The D. malabarica stem extracts showed bactericidal action (MBC, 0.4 mg/ml) against P. gingivalis ATCC33277 and bacteriostatic action against S. mutans ATCC25175. The biofilm production rate of S. mutans ATCC25175 and the expression of the comX gene associated to biofilm formation in the cultures treated with 0.2-1.0 mg/ml of D. malabarica stem extracts were suppressed in a concentration-dependent manner. Based on the above results, it can be concluded that D. malabarica stem extracts can be used as oral health material derived from natural materials, as demonstrated by the bacteriostatic action and inhibition of biofilm formation against S. mutans ATCC25175.