• 대한기계학회논문집B
• /
• 제27권4호
• /
• pp.424-431
• /
• 2003

The evaporation cooling phenomenon of a droplet containing a surfactant on a heated surface has been studied experimentally. The two kinds of heater modules made of brass and Teflon$^{TM}$ were tested to investigate the cooling characteristics of droplet. Solutions of water containing Sodium Lauryl Sulfate(0 ppm, 100 ppm, 1000 ppm) were tested in the experiments. The results showed that the contact angle decrease as the concentration of surfactant increases. The tendency did not very with different heated solid materials. As initial temperature of the heated surface becomes high, time averaged heat flux increases and evaporation time decreases with the denser concentration of surfactant. Therefore, water with denser concentration of surfactant could be effective to cool flammable materials. However, the effect of surfactant becomes low as the material temperature is higher than the boiling temperature of water.

• 한국세라믹학회지
• /
• 제35권12호
• /
• pp.1280-1285
• /
• 1998

Foaming method is presented the preparation of porous materials from high-concentrated kaolin silica and flyash slurries. The slurries were foamed dried and sintered respectively. The porosity of sintered ma-terials was about 70-75% Mean pore-size was the range of 70-150$\mu\textrm{m}$ and pore structure was continuous Sodium lauryl sulfate anionic surfactant was used as a foaming agent. The foaming ability and the froth sta-bility were increased with increasing the concentration of the foaming agent. But the size of the constituent bubble of froth after foaming process was not affected by the concentration of the foaming agent. These results showed that the mean pore-size of sintered materials was closely related to the froth stability which is related to the change of bubble-size during the drying process.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2008년도 추계학술대회 초록집
• /
• pp.94-97
• /
• 2008

현재 전주 국내에서는 전주에 대한 관심이 조금씩 증가하는 추세지만 그 활용 영역은 많지 않다. 최근들어 휴대폰 관련 부품과 LCD디스플레이의 핵심부품인 도광판 사출금형에 집중되어 있다. 본 연구에서는 반도체 웨이퍼 절단용 블레이드 제작을 목표로 Ni 전주도금층에 조밀하게 $Al_2O_3$를 분산시키는데 목표를 삼았다. 전주(electroforming)를 이용한 Ni-$Al_2O_3$를 첨가한 설파민산 니켈욕에 Surfactant의 양을 조절하며 Sodium Lauryl Sulfate의 첨가량이 많아질수록 Nickel 전주도금층 표면에 $Al_2O_3$는 접착되어지지 않고, 도금층의 두께는 두꺼워졌다. Surfactant의 첨가로인하여 Ni 전주도금층의 표면 장력이 감소하여 $Al_2O_3$를 감싸고 Ni 전주도금층이 성장하여야하는데 교반하는 과정에서 $Al_2O_3$ 입자들이 용액의 흐름에 따라 떨어져 나갔다.

• Bulletin of the Korean Chemical Society
• /
• 제19권1호
• /
• pp.50-56
• /
• 1998

A solvent sublation was studied for the determination of trace Cd, Co, Cu and Ni in water samples. Ammonium pyrrolidine dithiocarbamate (APDC) was used as a complexing agent. Experimental conditions such as pH of solution, amounts of APDC, the type and amount of surfactant, the type of solvent, etc. were optimized for the effective sublation of analytes. After metal-PDC complexes were formed in sample solutions of pH 2.5, the precipitate-type complexes were floated in a flotation cell with an aid of sodium lauryl sulfate as a surfactant and by bubbling with nitrogen gas. The precipitates were dissolved and separated into the surface layer of methyl iso-butyl ketone (MIBK). The analytes preconcentrated were determined by a graphite furnace atomic absorption spectrophotometry (GF-AAS). Extractability of each element was 88% for Cd(Ⅱ), 86% for Co(Ⅱ), 95% for Cu(Ⅱ) and 76% for Ni(Ⅱ), respectively. And this procedure was applied to the analysis of real samples. From the recoveries of more than 92%, it was concluded that this method could be simple and applicable for the determination of trace elements in various water samples of a large volume.

• Bulletin of the Korean Chemical Society
• /
• 제20권4호
• /
• pp.431-435
• /
• 1999

An organic precipitate flotation of Cd(Ⅱ) and Pb(Ⅱ) was investigated by the coprecipitation with lanthanum 8-hydroxyquinolinate. Trace amounts of Cd(Ⅱ) and Pb(Ⅱ) with a significantly large amount of La(Ⅲ) were simultaneously precipitated in a 1,000 mL sample solution with the ethanolic 8-hydroxyquinoline solution. The pH was adjusted to 9.0 with 2 M ammonia solution. The precipitates were floated with the aid of tiny nitrogen bubbles and supported by the stable foam layer of sodium lauryl sulfate. The floats were collected on the fritted glass filter by a suction. The material collected was dissolved with 5.0 mL of ethanol and 1.5 mL of concentrated nitric acid, and then diluted to 25.0 mL with a deionized water. The analytes were determined by a flame atomic absorption spectrophotometry. The recoveries of the analytes spiked in the sample were 94.8% for Pb(Ⅱ) and 92.0% for Cd(Ⅱ). This flotation technique is simple and rapid, and also applicable to the determination of trace Cd(Ⅱ) and Pb(Ⅱ) at lew ppb levels.

• 한국식품저장유통학회지
• /
• 제4권1호
• /
• pp.45-51
• /
• 1997

In our studies on the role of $\beta$-galactosidase in fruit softening, significant difficulty, was encountered in our attempts to extract RNA from persimmon(Diospyros kaki L. cv. Fuyu) fruit due to astringency and tannin content. Initial, unsuccessful RNA extractions involved methods using guanidinium isothiocyanate/CsCl with and without polyvinylpyrrolidone(PVP), phenol/sodium lauryl sulfate(SDS), guanidinium hydrochloride, as well as polysomal RNA purification method that used 0.2 M Tris-HCI (pH 9.0) containing KCI, Mg-acetate, EDTA, $\beta$-mercaptoethanol, and sucrose. A method was devised which employed treatment of fruit with CO2 gas to diminish astringency prior to RNA extraction, followed by extraction of tissue powders with Proteinase K extraction buffer containing PVP and ascorbate at an alkaline pH. This procedure resulted in the removal of tannins and other polyphenolics and extraction of relatively large amount of high-quality RNA suitable for cDNA library construction and polymerase chain reaction(PCR). Futhermore, the procedure does not use the toxic and corrosive chemical guanidinium isothiocyanate or require ultracentrifugation.

• The Korean Journal of Physiology and Pharmacology
• /
• 제17권1호
• /
• pp.9-13
• /
• 2013

The aim of the present study was to examine the effect of micellar systems on the absorption of beta-lapachone (b-lap) through different intestinal segments using a single-pass rat intestinal perfusion technique. B-lap was solubilized in mixed micelles composed of phosphatidylcholine and sodium deoxycholate, and in sodium lauryl sulfate (SLS)-based conventional micelles. Both mixed micelles and SLS micelles improved the in situ permeability of b-lap in all intestinal segments tested although the mixed micellar formulation was more effective in increasing the intestinal absorption of b-lap. The permeability of b-lap was greatest in the large intestinal segments. Compared with SLS micelles, the effective permeability coefficient values measured with mixed micelles were 5- to 23-fold higher depending on the intestinal segment. Our data suggest that b-lap should be delivered to the large intestine using a mixed micellar system for improved absorption.

• Bulletin of the Korean Chemical Society
• /
• 제16권7호
• /
• pp.582-588
• /
• 1995

The preconcentration and determination of trace Cd(Ⅱ), Cu(Ⅱ), Pb(Ⅱ), Mn(Ⅱ) and Zn(Ⅱ) in water samples were studied by the precipitate flotation using La(OH)3 as a coprecipitant. The analytes were quantitatively coprecipitated by adding 3.0 mL of 0.1 M La(Ⅲ) solution in a 1,000 mL water sample and adjusting the pH to 9.5 with NaOH solution. After the addition of the 1:8 mixed surfactant solution of each 0.1% sodium oleate and sodium lauryl sulfate, the solution was stirred with a magnetic stirrer for 10 minutes. The precipitates were floated to the surface by bubbling with nitrogen gas and collected in a small sampling bottle. The precipitates were dissolved in nitric acid and then the solutions were diluted to 25.00 mL with a deionized water. The analytes were determined by flame atomic absorption spectrometry. This procedure was applied to the waste water analysis. This technique was simple, convenient and especially rapid for the analysis of a large volume of sample. And also, from the recoveries of better than 92% which were obtained from real samples, this method could be judged to be applicable to the preconcentration and quantitative determination of trace elements in water samples.

• 마이크로전자및패키징학회지
• /
• 제18권4호
• /
• pp.39-42
• /
• 2011

복합전기도금은 도금 중 반응성이 없는 물질을 첨가하여 도금층 내부에 함께 존재하도록 함으로써 이루어진다. 퍼멀로이는 철과 니켈의 합금을 말하는 것으로써 마모 특성과 내부식성이 우수하고 복합도금을 함으로써 도금층의 잔류응력 완화와 경도증가, 높은 투자율를 나타내기 때문에 산업 여러 분야에 응용된다. 복합도금을 통해 제품의 미세경도를 향상시킬 수 있으며 이는 제품의 수명과 연관된다. 하지만 실리카 나노분말 표면의 수산화기는 표면을 수분에 취약하게 만들고 이는 나노분말의 응집을 발생시켜 균일한 도금층의 형성을 어렵게 하는 요인이 된다. 본 연구에서는 실리카 나노분말의 zeta potential의 측정과 실리카 나노분말의 응집을 줄이기 위하여 전류밀도의 변화, 첨가제의 변화를 살펴보았다. 표면은 전류밀도 20 $mA/cm^2$에서 가장 효과적이었으며 이 때 실리카의 함량은 $50^{\circ}C$에서 9%로 확인되었다. 첨가제에 따라 표면 형상과 공석되는 실리카 나노입자의 함량 차이가 나타났다. 염기성 도금용액에서 sodium lauryl sulfate를 사용하였을 경우 표면이 매끄럽고 공석되는 실리카 나노분말의 양도 높았다.

• 생명과학회지
• /
• 제28권1호
• /
• pp.110-115
• /
• 2018

본 연구는 천연물유래 구강건강소재로써 약용작물의 이용 가능성을 알아보기 위해 수행되었으며 네팔, 라오스, 몽골, 방글라데시, 베트남, 중국 등지에 자생하는 200여 종의 약용작물로부터 추출한 메탄올 추출물 중 인도감나무 줄기 추출물(1 mg/disc)이 P. gingivalis ATCC33277와 S. mutans ATCC25175에 대해 가장 우수한 항균활성을 나타내었으며 양성대조구로 사용한 chlorhexidine, sodium lauryl sulfate, triclosan과 유사한 항균활성을 나타내었다. 인도감나무 줄기 추출물은 P. gingivalis ATCC33277에 비해 S. mutans ATCC25175에 대해 높은 항균활성을 나타내었으며 P. gingivalis ATCC33277에 대해서는 살균작용(MBC, 0.4 mg/ml)을, S. mutans ATCC25175에 대해서는 정균작용을 하는 것으로 확인되었다. 인도감나무 줄기 추출물이 0.2-1.0 mg/ml 농도로 처리된 배양액에서 S. mutans ATCC25175의 바이오필름 생성율과 바이오필름 생성관련 유전자 comX의 발현은 추출물의 농도가 높아질수록 억제되는 것을 확인할 수 있었다. 이상의 결과를 종합하면 인도감나무 줄기 추출물은 치아우식증 원인균인 S. mutans ATCC25175에 대한 정균작용과 바이오필름 생성 억제능이 우수하기 때문에 천연물유래 구강건강소재로써 이용 가능성이 높을 것으로 판단된다.