• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.177-184
• /
• 2015

In order to use the high-volume slag cement as a construction materials, a proper activator which can improve the latent hydraulic reactivity is required. The dissolved aluminum silicon ions from ground granulated blast furnace slag (GGBFS) react with sulfate ions to form ettringite. The proper formation of ettringite can increase the early-age strength of high-volume GGBFS (80%) cement. The aim of this study is to investigate the hydration properties with sulfate activators (sodium sulfate, anhydrite). In this paper, the effects of $Na_2SO_4$ and $CaSO_4$ on setting, compressive strength, hydration, micro-structure were investigated in high-volume GGBFS cement and compared with those of without activator. Test results indicate that equivalent $SO_3$ content of 3~5% improve the early-age hydration properties such as compressive strength, heat evolution rate, micro-pore structure in high-volume GGBFS cement.

• Applied Chemistry for Engineering
• /
• v.17 no.4
• /
• pp.386-390
• /
• 2006

Colloidal silica which has high surface area and excellent surface properties are chemically stable inorganic materials and used for various applications in industry. Silica sol was prepared from sodium silicate solution by acid neutralization method and ion exchange treatment to remove sodium ions. Through the experimental analysis for controlling factors of particle growth rate, such as temperature, pH, and aging time, the uniform size distribution of silica sol could be obtained. The size distribution and shape of silica sol was measured by TEM and dynamic light scattering method. Zeta potential change and gelling phenomena of silica sol and its rheological properties also investigated.

• The Korean Journal of Physiology
• /
• v.10 no.1
• /
• pp.15-24
• /
• 1976

The action of aconite on the sodium plus potassium activated ATPase activity in the rabbit red cell membrane has been investigated and the experiments were also designed to determine the mechanism of action of aconite on the ATPase activity. The following results were observed. 1. The activity of the NaK ATPase from red cell membrane is stimulated by aconite, and the concentration of aconite for maximal activity is about 80 mg%. The pH optimum for the aconite sensitive component is 8.0. 2. The activating effect of aconite on the ATPase, with a given concentration of sodium in the medium, is increased by raising the potassium concentration but activity ratio is decreased. 3. The activating effect of aconite on the ATPase, with a given concentration of potassium in the medium, is increased by raising the sodium concentration but activity ratio is decreased. 4. The action of aconite on the ATPase activity is inhibited by calcium ions and the effect of inhibition is increased by small amounts of calcium but decreased by larger amounts. 5. The activating effect of aconite on the ATPase was not related to the sulfhydryl group of cysteine, the amino group of lysine, the hydroxyl group of threonine or the imidazole group of histidine. 6. The action of aconite on the ATPase activity is due to carboxyl group of the enzyme of NaK ATPase.

• The Korean Journal of Physiology
• /
• v.12 no.1_2
• /
• pp.15-23
• /
• 1978

The action of ascorbic acid on the sodium Plus potassium activated ATPase activity in the rabbit red cell membrane has been investigated and the experiments were also designed to determine the mechanism of action if ascorbic acid on the ATPase activity The following results were observed. 1. The activity of the NaK ATPase from red cell membrane is stimulated by ascorbic acid and the concentration of ascorbic acid for maximal activity is about 8 mM. 2. The activating effect of ascorbic acid on the ATPase activaty, with a given concentration of sodium in the medium, is increased by raisins the potassium concentration but activity ratio is decreased. 3. The activating effect of ascorbic acid on the ATPase activity, with a given concentration of potassium in the medium, is increased by raising the sodium concentration but activity ratio is decreased. 4. The action of ascorbic acid on the ATPase activity is stimulated by calcium ions and activity ratio is increased by raising the calcium concentration. 5. The activating effect of ascorbic acid on the ATPase activity was not related to the sulfhydryl group of cysteine or the hydroxyl group of threonine. 6. The activating effect of ascorbic acid on the ATPase activity is due to amino group and carboxyl group of the enzyme of NaK ATPase.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.628-634
• /
• 1999

The orientational binding of ${\omega}$-phenylakylammonium ions to the sodium dodecyl (SDS) micellar interface has been studied from $^{1}H\;NMR$ chemical shift data. The NMR resonaces of the methylene protons of SDS and aromatic protons embedded into the micellar interior have shown the upfield shift. The aromatic induced chemical shifts of the alkyl chain methylene protons of SDS demonstrate the deep penetration into the palisade layer by these organic salts. Alkylammonium groups have been considered to be oriented toward outside of the micellar interface. Aromatic rings have been thought to be oriented toward the micellar core. The depth of penetration by organic salts has been observed to increase with the length of alkyl chain.

• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.38-43
• /
• 2013

ETA (ethanolamine), a pH control agent, has been used as an ammonia substitute in the secondary system of nuclear power plants since 2001. It is impossible to remove ETA from the wastewater treatment system in the nuclear power plant operating currently, because it is the non-biodegradable organics in terms of the environmental. The optimum process and chemicals for the removal of chemical oxygen demand (COD) & N with the field sample were investigated. More than 95% of Ammonium ions, contained much in wastewater, was removed with a diffused aeration system. COD could be removed over 90% through the process that includes the oxidation with mixed peroxidants (sodium persulfate/sodium percarbonate) followed by the physicochemical treatment with coagulants.

• Korean Membrane Journal
• /
• v.6 no.1
• /
• pp.55-60
• /
• 2004

In recent years, an increasing interest in membrane technology has been observed in chemical and environmental industry. Membrane technology has advantages of low cost, energy saving and environmental clean technology comparing to conventional separation processes. Pervaporation is one of new advanced membrane technology applied for separation of azeotropic mixtures, aqueous organic mixtures, organic solvent and petrochemical mixtures. Sodium alginate composite membranes were prepared for the enhancement of long-term stability of pervaporation performance of water-ethanol mixture using pervaporation. Sodium alginate membranes were crosslinked with CaCl$_2$ and coated with polyelectrolyte chitosan to protect washing out of calcium ions from the polymer. The surface structures of PAN and hydrolysed PAN membrane were confirmed by ATR Fourier transform infrared (FT-IR). A field emission scanning electron microscopy (FE-SEM; Jeol 6340F) operated at 15 kV. Concentration profiles for Ca in the membrane surface and membrane cross-section were taken by an energy dispersive X-ray (EDX) analyser (Jeol) attached to the field emission scanning electron microscopy (Jeol 6340F). Pervaporation experiments were done with several operation run times to investigate long-term stability of the membranes.

• Journal of the Korean Chemical Society
• /
• v.27 no.4
• /
• pp.262-267
• /
• 1983

A study has been carried out for a scheme of the selective extraction and determination of cesium, sodium and nuclides by the ion association with dicyclohexyl-24-crown-8 and sodium tetraphenylborate from primary coolant of a pressurized water reactor. For that purpose, the effects of hydrogen, cesium and borate ions on the extraction have been investigated. Interferences of iodine and xenon nuclides were found but could be removed by reducing with sodium thiosulfate and back extraction with 1 N hydrochloric acid solution, respectively.

• The Korean Journal of Physiology
• /
• v.11 no.1
• /
• pp.1-9
• /
• 1977

Action of anthraquinone on the sodium plus potassium activated ATPase activity in the rabbit red cell membrane has been investigated and the experiments were also designed to determine the mechanism of action of anthraquinone on the ATPase activity. The following results were obtained 1. The activity of the NaK ATPase from red cell membrane is inhibited by anthraquinone and the concentration of anthraquinone for maximal inhibition is about 5mM. 2. The ratio of inhibition of NaK ATPase by anthraquinone, with a giving concentration of sodium in the medium, is increased by raising the potassium concentration. 3. The ratio of inhibition of NaK ATPase by anthraquinone, with a given concentration of potassium in the medium, is increased by raising the sodium concentration. 4. The action of anthraquinone on the NaK ATPase activity is inhibited by calcium ions and the ratio of inhibition is increased by small amounts of calcium but almost constant by larger amounts. 5. The inhibitory action of anthraquinone on the NaK ATPase activity was not related to the amino group of lysine, the hydroxyl group of threonine or the imidazole group of histidine. 6. The inhibitory action of anthraquinone on the ATPase activity is due to sulfhydryl group or the carboxyl group of the enzyme of NaK ATPase.

• Membrane and Water Treatment
• /
• v.7 no.1
• /
• pp.55-70
• /
• 2016

Microfiltration/ultrafiltration (MF/UF) Adsorptive polyamide-6 (PA-6) membranes were prepared using wet phase inversion process. The prepared PA-6 membranes are characterized by scanning electron microscopy (SEM), porosity and swelling degree. In this study, the membranes performance has examined by adsorptive removal of copper ions from aqueous solutions in a batch adsorption mode. The $PA-6/H_2O$ membranes display sponge like and highly porous structures, with porosities of 41-73%. Under the conditions examined, the adsorption experiments have showed that the $PA-6/H_2O$ membranes had a good adsorption capacity (up to 120-280 mg/g at the initial copper ion concentration ($C_0$) = 680 mg/L, pH7), fast adsorption rates and short adsorption equilibrium times (less than 1.5-2 hrs) for copper ions. The fast adsorption in this study may be attributed to the high porosities and large pore sizes of the $PA-6/H_2O$ membranes, which have facilitated the transport of copper ions to the adsorption. The results obtained from the study illustrated that the copper ions which have adsorbed on the polyamide membranes can be effectively desorbed in an Ethylene dinitrilotetra acetic acid Di sodium salt ($Na_2$ EDTA) solution from initial concentration (up to 92% desorption efficiency) and the PA-6 membranes can be reused almost without loss of the adsorption capacity for copper ions. The results obtained from the study suggested that the $PA-6/H_2O$ membranes can be effectively applied for the adsorptive removal of copper ions from aqueous solutions.