• Journal of the Korean Chemical Society
• /
• v.16 no.4
• /
• pp.249-256
• /
• 1972

Hadong-Kaolin was treated with aqueous sodium hydroxide solution. The crystalline structure was studied by X-ray powder diffraction method. The optimum conditions for various crystal formation were as follows: Crystal Concentration Temp. reating time Halloysite 1~4 N NaOH $60^{\circ}C$ 0.5${\sim}$4 hr Sodium A zeolite 0.5${\sim}$2 N NaOH 80${\sim}$$100^{\circ}C$ 6${\sim}$20 hr Hydoxysodalite > 4 N NaOH 80${\sim}$$100^{\circ}C$ > 4 hr The ratio of $Na_2O to SiO_2$ for crystallizing sodium A zeolite was 0.5-1.5. The $Ca^{++}$ ion exchange capacity of produced sodium A zeolite for 0.2 N $CaCl_2$ solution at $25^{\circ}C$ was amounted to 65% of theoretical value.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.20 no.3
• /
• pp.155-160
• /
• 2000

This syudy was conducted to increase the utility of forage rye which are suitable to be cultivated at high altitude Taekwllyong area. For that purpose two cultivars of rye (winter-more, kool-glazer) were cultivated for 3years using a randomized block design with 3 replications. The dry matter digestibility (DMD) was evaluated with the pelleted rye hay produced by adding sodium hydroxide and then the TDN value was calculated by the DMD. By adding NaOH, DMD and TDN value of rye pellets (Y=46.92+ 1.8X, ~ 0 . 9 7 )w ere increased significantly (p<0.05) and NDF (neutral detergent fiber) decrease significantly. However, ADF (acid detergent fiber) and lignin did not significantly decrease (p<0.05). Rye could be cultivated as a second crop after com at high altitude area in the same year and pelleted with NaOH in order to increase the nutritive values (p< 0.05). (Key words : Dry matter digestibility (DMD), Forage rye, NDF, ADF, Sodium hydroxide)

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.26-33
• /
• 2012

This paper reported on the effect of blended activator on the physical properties of alkali-activated slag mortar. Five different activators(caustic alkalis) were used: sodium hydroxide(NaOH, A Case), calsium hydroxide($Ca(OH)_2$, B Case), magnesium hydroxide($Mg(OH)_2$, C Case), aluminum hydroxide($Al(OH)_3$, D Case), and potassium hydroxide(KOH, E Case). We blended five caustic alkalis with sodium carbonate($Na_2CO_3$). The dosage of five caustic alkalis was 3M and sodium carbonate was 1M, 2M and 3M. The result of flow and setting time was decrease as the dosage of sodium carbonate increase. But the compressive strength was increase as the dosage of sodium carbonate increase. It was shown that there is a good effect of blended caustic alkalis with sodium carbonate in alkali-activated slag mortar.

• Journal of the Korea Concrete Institute
• /
• v.24 no.6
• /
• pp.745-752
• /
• 2012

This paper studies the effect of the compressive strength for combined alkali-activated slag mortars. The effect of activators such as alkali type and dosage factor on the strength was investigated. The alkalis combinations made using five caustic alkalis (sodium hydroxide (NaOH, A series), calcium hydroxide ($Ca(OH)_2$, B series), magnesium hydroxide ($Mg(OH)_2$, C series), aluminum hydroxide ($Al(OH)_3$, D series), and potassium hydroxide (KOH, E series)) with sodium carbonate ($Na_2CO_3$) were evaluated. The mixtures were combined in different dosage at 1M, 2M, and 3M. The study results showed that the compressive strength of combined alkali-activated slag mortars tended to increase with increasing sodium carbonate. The strength of combined alkali-activated slag mortars was better than that of control cases (without sodium carbonate). The result from scanning electron microscopy (SEM) analysis confirmed that there were reaction products of calcium silicate hydrate (C-S-H) and alumina-silicate gels from combined alkali-activated slag specimens.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.4
• /
• pp.334-341
• /
• 1998

Sodium hydroxide concentrations were adjusted to 2.0, 2.5, 3.0 and 3.5M by dissolution in seawater. The fly ash was hydrothermally reacted with sodium hydroxide solutions (1:8, W:V) at $100^{\circ}C$ under the closed system. X-ray diffractogram proved that Na-P1 type zeolite was produced from bituminous coal fly ash. It is different from the X-ray of artificial zeolite produced by using sodium hydroxide solution dissolving in distilled water. Solid sieve structure was developed well by hydrothermal reaction with the ash and 3.0M sodium hydroxide. However chinks were observed in the structure of the product by 3.5M sodium hydroxide. CEC of the artificial zeolite was $244.5cmol^+\;kg^{-1}$ at 2.0M, 259.8 at 3.0M, 263.4 at 3.0M and 179.8 at 3.5M after 24 hours hydrothermal reaction; Artificial zeolite having high CEC, above $244.5cmol^+\;kg^{-1}$ could produce by using lower concentration of NaOH prepared in seawater than other production methods.

• Resources Recycling
• /
• v.32 no.3
• /
• pp.38-44
• /
• 2023

Leaching tests were conducted using sulfuric acid and sodium hydroxide solutions to remove impurities from domestic graphite concentrate. As a result of the leaching experiment using sulfuric acid solution and sodium hydroxide solution, respectively, the difference of removal efficiency was insignificant when the concentration of sodium hydroxide or sulfuric acid was 2 mol/L or more. The fixed carbon content increased with increasing the temperature in the sulfuric acid solution leaching, while it remains constant above 150℃ in sodium hydroxide solution. For the repeated sequential leaching tests, the leaching conditions were 2 mol/L NaOH, 200℃, 1 hour in the sodium hydroxide solution leaching and 2 mol/L H₂SO₄, 100℃, 1 hour in the sulfuric acid solution leaching, respectively. When sulfuric acid leaching followed by sodium hydroxide solution leaching was repeated 5 times, the fixed carbon increased to 99.95% and ash content decreased to 0.048%, while the fixed carbon increased to 99.98% and ash content was reduced to 0.018 when sodium hydroxide solution leaching followed by sulfuric acid solution leaching was repeated 5 times.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.199-200
• /
• 2019

The purpose of the research is assessing the possibility of strength recovery for mortar added with accidently high amount of fly ash. For compressive strength at 28 day, the sample painted with sodium hydroxide showed higher compressive strength than the sample painted with calcium hydroxide. Regarding the curing conditions, the curing temperature 65℃ provided better conditions than the curing temperature 20℃ in aspect of solution penetration depth and reactivity of fly ash. In the case of drying after saturation, the case painted with sodium hydroxid 65℃ showed the clearest engrossing mark.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.110-117
• /
• 2016

In the existing research, the ammonia aqueous solution was used in order to remove the Nitrogen dioxide using the scrubber. However, ammonia is poisonous and stench is extreme. So, the system application follows the difficulty. Experiments were conducted to find a substitute material ammonia. The sodium hydroxide(NaOH), sodium thiosulfate ($Na_2S_2O_3$), and urea were used with the substitute substance. The experimental condition proceeded as the optimum conditions in the existing ammonia use. The experimental result NaOH and $Na_2S_2O_3$ was available. NaOH showed the efficiency which is the highest in 2.5%. And $Na_2S_2O_3$ showed the efficiency which is the highest in 5.0%. The efficiency was not fixed and the urea was inappropriate with the substitute substance.

• The Journal of Natural Sciences
• /
• v.8 no.2
• /
• pp.119-127
• /
• 1996

The effect of sodium hydroxide treatment on some physicochemical properties of zeolite mordenite mineral was studied with chemical analyses, powder X-ray diffraction, thermal analyses, infrared analysis, measurement of carbon dioxide adsorption and gas chromatography. Mordenite mineral from tuffaceous rocks in Yeongil and Wolsung area was used as a starting material and treated with 0.1-5N NaOH aqueous solution at about $95^{\circ}C$ in the water bath for three hours.At the concentration of sodium hydroxide below 0.5N, all chemical compositions in the tuff were virtually insoluble and the mordenite structure did not change. At the concentration above 1N, the chemical compositions such as silica, alumina, etc., were dissolved. The dissolution ratio of silica was lager than that of alumina, and the ratio of silica to alumina in the tuff decreased sharply in the concentration range of 2 to 3N. Intensity of X-ray diffraction peak of mordenite (202) plane and the adsorbed amount of carbon dioxide also decreased with the increasing concentration of sodium hydroxide above 1N. These decreases corresponded to the degree of mordenite structure collapsed.The separation of gas chromatography of nitrogen, oxygen and carbon monoxide was not affected by the sodium hydroxide treatment, but elution peaks of methane and krypton tended to be broadened and their retention time was shortened. The elution peaks of both methane and krypton tended to be overlapped with those of nitrogen and oxygen.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.6
• /
• pp.1-7
• /
• 2014

Dissolving part of xylan and lignin in lignocellulosic biomass by base can be used as pretreatment technique. Cork oak was pretreated with sodium hydroxide solution and the pretreatment effects were evaluated with two critical factors - NaOH concentration and pretreatment temperature. Some of xylan and lignin were removed by base pretreatment. At $90^{\circ}C$ and 13% NaOH pretreatment, 22.0% of lignin and 78.8% of xylan removed by base treatment. Enzymatic hydrolysis of cork oak which was pretreated at higher temperature or concentration was further improved. After pretreatment of cork oak with 13% NaOH at $90^{\circ}C$, the conversion rate of cellulose to fermentable sugars were reached up to 91.3%. At ethanol fermentation with enzymatic hydrolysate from different pretreatment conditions, all enzymatic saccharification liquids were well fermented by Saccharomyces cerevisiae.