• 대한약학회:학술대회논문집
• /
• 대한약학회 2002년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2
• /
• pp.313.2-313.2
• /
• 2002

Environmentally benign protein staining method in sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) using both an acidic dye, zincon (ZC) and a basic dye. ethyl violet (EV) is described. It is based on a counter ion-dye staining technique that employs oppositely charged two dyes to form an ion-pair complex. The selective binding of the free dye molecules to proteins in an acidic solution produces bluish violet colored bands. It is a rapid procedure, involving only fixin and staining steps that are completed in 45 min. (omitted)

• 한국식품영양학회지
• /
• 제37권1호
• /
• pp.48-56
• /
• 2024

Effects of glutamic acid (Glu) and monosodium glutamate (MSG) on oxidative stability of oil-in-water (O/W) emulsions with different emulsifier charges during riboflavin (RF) photosensitization were evaluated by analyzing headspace oxygen content and conjugated dienes. Cetyltrimethylammonium bromide (CTAB), Tween 20, and sodium dodecyl sulfate (SDS) were used as cationic, neutral, and anionic emulsifiers, respectively. Glu acted as an antioxidant in CTAB- and Tween-20-stabilized O/W emulsions during RF sensitization, whereas Glu acted as prooxidants in SDS-stabilized O/W emulsions in the dark. However, adding MSG did not have a constant impact on the degree of oxidation in O/W emulsions irrespective of the emulsifier charge. In RF-photosensitized O/W emulsions, the emulsifier charge had a greater influence on antioxidant properties of Glu than on those of MSG.

• Journal of Microbiology
• /
• 제33권3호
• /
• pp.244-251
• /
• 1995

An extracellular protease of Salmonella schottmulleri was purified from culture filtrate by using 0-75% ammonium sulfate precipitation, DEAE Sepharose Fast Flow ion exchange chromatography, Ultrogel HA chromatography and Sephacryl S-200 HR molecular sieve chromatography. To measure enzyme activity, synthetic dipeptide substrate (CBZ-arg-arg-AFC) with low molecular weight was employed as substrate. The molecular weight of the purified enzyme was approximately 80 kDa when determined by gel filtration on Sephacryl S-200 HR and 73 kDa when estimated by SDS-PAGE. The isoelectric point was 5.45. The activity of the purified enzyme was inhibited by metal chelating agesnts such as EDTA and 1.10-phenanthroline. The divalent cations, such as Ca$\^$2+/, Zn$\^$2+/, Fe$\^$2+/, Mg$\^$2+/ enhanced its activity. These results suggested that it was a metalloprotease. It had a narrow pH optimum of 6.5-7.5 with a maximum at pH 7.0 and a temperature optimum of 40.deg.C. It was stable at least for 1 week at 40.deg.C and maintained its activity for 24 hours at 50.deg.C, but it was rapidly inactivated at 65.deg.C. This protease was shown to be sensitive to sodium 50.deg.C, but it was rapidly inactivated at 65.deg.C. This protease was shown to be sensitive to sodium 50.deg.C, but it was rapidly inactivated at 65.deg.C. This protease was shown to be sensitive to sodium 50.deg.C, but it was rapidly inactivated at 65.deg.C. This protease was shown to be sensitive to sodium dodecyl sulfate (SDS) and was inactivated in a dose-dependent manner. However, it was resistant to Triton X-100 and the activity was enhanced to 32.3% with treatment of 0.025% Triton X-100.

• Food Science and Biotechnology
• /
• 제15권2호
• /
• pp.324-327
• /
• 2006

The food-borne pathogen Listeria monocytogenes is commonly associated with meats and unpasteurized dairy products. To identify this pathogen in meats more efficiently than has been done in the past, we purchased meats from Korean markets and performed sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and serotyping analysis on Listeria organisms isolated from meat samples. Each Listeria species showed specific protein band patterns on SDS-PAGE. Whole-cell protein SDS-PAGE profiles indicated that the organisms isolated from meats sold in local Korean markets were L. monocytogenes with the serotypes 1/2a, 1/2b, 1/2c, and 4b. We suggest that it is possible to carry out molecular subtyping of L. monocytogenes using SDS-PAGE.

• Advances in environmental research
• /
• 제5권4호
• /
• pp.213-224
• /
• 2016

This paper presents a numerical model based on a UTCHEM simulator to simulate surfactant flushing process to remediate diesel contaminated sand column. For this purpose, we modeled remediation process under 10000 and 20000 ppm initial concentrations of diesel. Various percent-mass sodium dodecyl sulfate (SDS) considered in our model. The model results indicated that 0.3 percent-mass of SDS at 10000 ppm and 0.1 percent-mass of SDS at 20000 ppm initial diesel concentration had maximum removal perdition which is in agreement with the experiment results. For 10000 ppm diesel concentrations, the coefficient of determination ($R^2$) and index of agreement (IA) between the model result and the experimental data were 0.9952 and 0.9695, respectively, and for 20000 ppm diesel concentrations, $R^2$ and IA were 0.9977 and 0.9935, respectively. The sensitivity analysis of permeability illustrated that in all diesel concentrations and SDS percent-mass with increasing permeability the model resulted in more removal efficiency.

• Bulletin of the Korean Chemical Society
• /
• 제25권9호
• /
• pp.1321-1325
• /
• 2004

Sodium dodecyl sulfate (SDS), an anionic surfactant, can strongly adsorb at the surface of a carbon paste electrode (CPE) via the hydrophobic interaction. In pH 3.0 $Na_2HPO_4$-citric acid buffer (Mcllvaine buffer) and in the presence of SDS, the cationic indole-3-acetic acid (IAA, $pK_a$ = 4.75) was highly accumulated at the CPE surface through the electrostatic interaction between the negative-charged head group of SDS and cationic IAA, compared with that in the absence of SDS. Hence, the oxidation peak current of IAA increases greatly and the oxidation peak potential shifts towards more negative direction. The experimental parameters, such as pH, varieties of surfactants, concentration of SDS, and scan rate were optimized for IAA determination. The oxidation peak current is proportional to the concentration of IAA over the range from $5\;{\times}\;10^{-8}$ mol/L to $2\;{\times}\;10^{-6}$ mol/L. The detection limit is $2\;{\times}\;10^{-8}$ mol/L after 3 min of accumulation. This new voltammetric method was successfully used to detect IAA in some plant leaves.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제16권5호
• /
• pp.90-96
• /
• 2011

Simultaneous removal of heavy metals (Cd, Pb) and diesel-fuel from a soil column was evaluated by respectively flushing with sodium dodecyl sulfate (SDS) solution, mixture of SDS and sodium iodide (SDS + NaI), and surfactant foam (SDS + NaI foam). First, this study evaluated these flushing methods to the heavy metals only-contaminated soil for removal of heavy metals from the heavy-metal only contaminated soil column. After 7 pore volume flushing of the soil column, Cd removal efficiencies from the soil were 40% by SDS solution, 50% by SDS + NaI mixture, and 60% by surfactant foam. The flushing results implied that anionic surfactant and ligand can be efficiently applied to extraction of Cd from the heavy metal contaminated soil. Furthermore, surfactant foam flushing showed an increased flushing efficiency with enhancing the contact between surfactant solution and soil. However, Pb removal efficiency by these flushing methods did not show any difference unlike those of Cd. Second, this study eventually evaluated flushing methods for simultaneous removal of heavy metals and diesel-fuel from the soil column with 7 pore volume flushing. Diesel-fuel removal efficiencies were 50% by SDS + NaI flushing and 90% by SDS + NaI foam flushing. Cd removal efficiency by the foam flushing reached to 80% which was higher than the result of the previous heavy metals onlycontaminated soil experiment. This result implied that diesel-fuel could act as a metal-solvent while it contacted to heavy metals present in the soil. This study clearly showed that surfactant foam flushing simultaneously removed heavy metals and diesel fuel from the soil column.

• 한국의류학회지
• /
• 제11권2호
• /
• pp.101-112
• /
• 1987

The purpose of this study is to investigate the influence of addition of sodium dodecyl sulfate(SDS) when wool is treated with sodium hydroxide(NaOH). Physical and chemical changes were examined on wool treated with various cone. of NaOH and SDS simultaneously. The result are as follows. 1. The higher the temperature and the longer the time of NaOH treatment are, the more alkali damage wool get : increase in weight loss and decrease in urea-bisalphite solubility and in tensile strength. But the treatment time reacts less effective than the temperature. 2. When wool is treated with NaOH, at NaOH cone. under $10^{-3}M$., the addition of SDS alleviates the alkali reaction on wool: increase in cystine contents and in urea-bisulpite solubility, and decrease in degree of swelling. On the other hand, at NaOH cone. over $10^{-2}M$., the addition of SDS promotes the alkali reaction on the wool. 3. When wool is treated with NaOH, the addition of SDS shows no changes on the tensile strength. On the other hand, at NaOH cone. under $10^{-2}M$., the addition of SDS shows no changes on the softness of wool, but at the $10^{-1}M$. NaOH cone. addition of SDS increases the soft-ness of wool. The area shrinkage of wool treated with NaOH and SDS shows less changes than with NaOH only.

• BMB Reports
• /
• 제37권4호
• /
• pp.387-393
• /
• 2004

The L-asparaginase (E. C. 3. 5. 1. 1) enzyme was purified to homogeneity from Pseudomonas aeruginosa 50071 cells that were grown on solid-state fermentation. Different purification steps (including ammonium sulfate fractionation followed by separation on Sephadex G-100 gel filtration and CM-Sephadex C50) were applied to the crude culture filtrate to obtain a pure enzyme preparation. The enzyme was purified 106-fold and showed a final specific activity of 1900 IU/mg with a 43% yield. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) of the purified enzyme revealed it was one peptide chain with $M_r$ of 160 kDa. A Lineweaver-Burk analysis showed a $K_m$ value of 0.147 mM and $V_{max}$ of 35.7 IU. The enzyme showed maximum activity at pH 9 when incubated at $37^{\circ}C$ for 30 min. The amino acid composition of the purified enzyme was also determined.

• 한국산학기술학회논문지
• /
• 제17권10호
• /
• pp.199-203
• /
• 2016

아포리포포린-III (apoLp-III)를 꿀벌부채명나방 종령 유충 혈림프로부터 KBr 농도구배 초원심분리와 겔크로마토그래피(Sephadex G-100)를 이용하여 분리, 정제하였다. KBr 농도구배 초원심분리가 끝난 후, 리포포린을 제외한 분획 (lipophorin-free fractions)을 겔크로마토그래피 시료로 사용하였으며, 겔크로마토그래피를 행한후 sodium dodecyl sulfate (SDS)-전기영동으로 apoLp-III의 정제를 확인하였다. 또한, 본 연구에서는 유충 혈림프로부터 정제된 apoLp-III가 꿀벌부채명나방의 성충 정소에 의해 흡수되는 지를 조사하였다. 우화한 지 1일 또는 2일된 성충으로부터 성충 정소를 차가운 링거액에서 분리한 후 조직 배양의 시료로 사용하였다. 순수 정제한 apoLp-III를 dimethyl sulfoxide (DMSO)에 녹인 형광물질 fluorescein isothiocyanate (FITC)와 상온에서 계속 저어가면서 1시간 동안 배양하였다. FITC로 표지된 apoLp-III (FITC-labeled apoLp-III)를 Sephadex G-25 PD-10 column을 이용하여 정제하고 확인하였다. 정제된 FITC-labeled apoLp-III와 성충 정소 조직을 상온에서 30분간 배양하였다. 배양 후 형광현미경 (fluorescence Axioskop microscope)과 SDS-전기영동을 이용하여 FITC-labeled apoLp-III가 정소 조직으로 들어가는 지의 여부를 확인하였다. 그 결과 FITC-labeled apoLp-III가 성충 정소로 흡수된다는 사실을 알 수 있었다.