• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.799-805
• /
• 2008

In general, anionic and cationic surfactants are incompatible because their mixtures form insoluble complexes and precipitate in the water. There are, however, some equimolar complexes of anionic and cationic surfactant that are soluble and behave like regular surfactants, specifically like nonionic surfactants, thus named pseudo-nonionic surfactant complexes. Pseudo-nonionic complexes are more effective and efficient in surface activities than their ionic surfactant components as shown by their equilibrium and dynamic surface tensions. They pack at the interface more than their ionic components. When a novel cationic surfactant, diglyceryl dodecyl dimethyl ammonium chloride(DGDAC), having the polyhydroxyl group at the hydrophilic head group, was mixed with a conventional anionic surfactant (sodium dodecyl sulfate; SDS) at equimolar ratio, we found that the aqueous equimolar mixture showed strong positive synergism in which molecular interaction parameter ${\beta}^M$ was very low, -17.2. According to the studies of equilibrium phase behavior and microscopy, this mixed system could form homogenous solutions containing vesicles.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.61-61
• /
• 2008

Nanocomposites of metal (gold and silver) nanoparticles and multi-walled carbon nanotubes (MWNTs) were prepared with the assistance of various stabilizers for metals and MWNTs. Especially common surfactants such as poly(4-vinylpyridine) (PVP), sodium dodecyl sulfate (SDS), poly(sodium 4-styrene sulfonate) (PSS), and poly(diallyldimethylammonium) chloride (PDDA) were used for the sample preparation. Metal/MWNT nanocomposites were structurally characterized in by transmission electron microscopy (TEM), x-ray photoelectron spectroscopy (XPS), x-ray diffraction (XRD), UV/Vis spectroscopy. In addition, the electrical properties of the nanocomposites were studied by cyclic voltammetry (CV).

• Korean Chemical Engineering Research
• /
• v.59 no.2
• /
• pp.219-224
• /
• 2021

Ion flotation is an efficient method to remove metal ions from aqueous solution. In this work, ion flotation was applied to calcium removal from aqueous solution. The parameters used included sodium stearate (SS) and sodium dodecyl sulfate (SDS) as collectors, 1-butanol and 1-propanol as frothers, pH, and air-flow rate. An L16 orthogonal array was chosen according to the mentioned factors and levels, and experimental tests were conducted according to the Taguchi orthogonal array. The results showed that all of the factors except one had significant effect on the flotation performance. The percentage contribution of parameters showed that type of frother and type of collector made the greatest (43.14%) and the lowest (9.86%) contribution, respectively. In optimal conditions, the recovery of Ca (II) ion was 45.67%. Also, the results illustrated that the Taguchi method could predict calcium removal from aqueous solution by ion flotation with 2.63%. This study showed that the use of ion flotation was an effective method for Ca (II) ion removal from aqueous solution.

• Membrane and Water Treatment
• /
• v.2 no.3
• /
• pp.137-145
• /
• 2011

Membrane processes are major breakthrough for the removal of organic pollutants in water remediation. The separations of solutes depend on nature of the membranes and solutes. The separation performance depends on the nature of the solutes (i.e., molecular volume, polarity, and hydrophobicity) for the same membrane. As 4-chlorophenol is of more dipolemoment compared to 2-chlorophenol, the orientation of the molecule enables it pass through the pores of the membrane, which is of negatively charged and thus separation order follows: 2-chlorophenol > 4-chlorophenol. Hydrophobicity factor also supports the order. Addition of sodium dodecyl sulfate (SDS) to chlorophenol solution shows remarkable increase in separation performance of the membrane. The improvement in separation is 1.8 and 1.5 times for 4- and 2- chlorophenol consecutively in case of 0.0082 M SDS (1cmc = 0.0082 M) in the solution. 4-chlorophenol has better attachment tendency with SDS because of its relatively more hydrophobic nature and thus reflects in performance i.e. the separation performance of 4-chlorophenol with SDS through the membrane is better compared to 2-chlorophenol.

• Environmental Engineering Research
• /
• v.24 no.3
• /
• pp.456-462
• /
• 2019

Hydrocarbon contamination is among the most challenging problems in soil remediation. Electrokinetic method can be a promising method to remediate hydrocarbon-contaminated soils. Electrokinetic method consists of different transport phenomena including electro-migration, electrophoresis, and electroosmotic flow. Electroosmotic flow is the main transport phenomenon for hydrocarbon removal in soil porous media. However, the main component of hydrocarbons is the hydrophobic organic which indicates low water solubility; therefore, it makes the electroosmotic flow less effective. The objective of the present study is to enhance electrokinetic remediation of diesel-contaminated silty sand by increasing the solubility of the hydrocarbons in the soil and then increase the efficiency. For this purpose, sodium dodecyl sulfate (SDS) was used as a catholyte. In this content, SDS 0.05 M was used as catholyte and $Na_2SO_4$ 0.1 M was used as an anolyte. Low (1 V/cm) and high (2 V/cm) voltage gradients were used in periodic and continuous forms. The best removal efficiency was observed for high voltage gradient (2 V/cm) in a periodic form, which was 63.86. This result showed that a combination of periodic voltage application in addition to the employment of SDS is an effective method for hydrocarbon removal from low permeable sand.

• Journal of Microbiology and Biotechnology
• /
• v.2 no.2
• /
• pp.135-140
• /
• 1992

The partitioning of recombinant human interleukin-2(rhII-2) in PEG 8000-dextran 38800 aqueous two-phase system has been investigated using three different sources of rhIL-2. In the case of pure rhIL-2, the solubility in a PEG-dextran two-phase system was low and most of rhIL-2 was partitioned into the bottom phase. For the recovery of rhIL-2 from insoluble protein aggregates, the inclusion bodies of recombinant E. coli were solubilized by the treatment with sodium dodecyl sulfate (SDS). The addition of SDS significantly enhanced not only the solubility of rhIL-2 but also the partitioning of rhIL-2 to the top phase. When the ratio of SDS to rhIL-2 was 2.0, the partition coefficient(K) and the recovery yield(Y) at the top phase were 4.5 and 88%, respectively, at pH 6.8. In order to reduce the recovery steps further, SDS was directly added to the intact recombinant E. coli cells and then partitioned into the PEG/dextran aqueous two-phase system. The observed partition coefficient ($K{\cong{3.0$) and recovery yield ($Y{\geq}80%$ )of this method were comparable to the rhIL-2 recovery from insoluble protein aggregates. The results obtained in this work indicate that PEG-dextran two-phase partitioning might provide a simple way for the recovery and partial purification of recombinant proteins which are produced as inclusion bodies.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.4
• /
• pp.670-675
• /
• 2008

A laccase was isolated from the culture filtrate of the basidiomycete Fomitella fraxinea. The enzyme was purified to electrophoretical homogeneity using ammonium sulfate precipitation, anion-exchange chromatography, and gel-filtration chromatography. The enzyme was identified as a monomeric protein with a molecular mass of 47 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and gel-filtration chromatography, and had an isoelectric point of 3.8. The N-terminal amino acid sequence for the enzyme was ATXSNXKTLAAD, which had a very low similarity to the sequences previously reported for laccases from other basidiomycetes. The optimum pH and temperature for 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) were 3.0 and $70^{\circ}C$, respectively. The enzyme also showed a much higher level of specific activity for ABTS and 2,6-dimethoxyphenol (DMP), where the $K_m$ values of the enzyme for ABTS and 2,6-DMP were 270 and $426{\mu}M$, respectively, and the $V_{max}$ values were 876 and $433.3{\mu}M/min$, respectively. The laccase activity was completely inhibited by L-cysteine, dithiothreitol (DTT), and sodium azide, significantly inhibited by $Ni^+,\;Mn^{2+}$, and $Ba^{2+}$, and slightly stimulated by $K^+$ and $Ca^{2+}$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.4
• /
• pp.259-263
• /
• 1998

High molecular weight glutenin (HMW-Glu) subunit compositions of 73 Korean wheat cultivars and experimental lines were evaluated by using one dimensional sodium dodecyl sulfate-polyacrylamide gel electrophoresis. This method is suitable for obtaining a good resolution of 1Dx2 and 1Ax2$^*$ without adverse effects on separation of other HMW-Glu subunits. Korean wheats examined in this study could be divided into 15 different groups on the basis of HMW-Glu subunit compositions. From the wheat lines tested, it was identified that there were three alleles at the Glu-Al, five at the Glu-Bl and three at the Glu-D1 loci. The null allele of the Glu-Al was occurred in high frequency (79.4%), while low frequencies for 1Ax1 (12.3%) and 1Ax2$^*$(8.2%) were found. High frequency (75.3%) of the subunit pairs of 1Bx7+1By8 at the Glu-Bl loci compared with other subunits was found. The frequencies of subunits 1Dx2. 2+1Dy12 and 1Dx2+1Dy12 from the Glu-D1 loci were 54. 8% and 37.0%, respectively. However, a few Korean wheat lines (8.2%) carried 1Dx5 + 1Dy10 subunit pair which are responsible for good breadmaking quality. The information of HMW-Glu subunit compositions provide a useful tool to characterize wheat lines, and can be directly used in selection of breeding lines of different end-use properties.

• Asian Journal of Atmospheric Environment
• /
• v.6 no.1
• /
• pp.33-40
• /
• 2012

In this study, we characterized the physical form of allergenic Cry j 1 in the urban atmosphere. Through an immunofluorescence antibody method, we showed that allergenic Cry j 1 exists as fine particles (${\leq}1.1{\mu}m$). To determine Cry j 1 concentrations and its particle size distribution, we used the ELISA method to confirm that most Cry j 1 exists as fine particles in the urban atmosphere and is found at high concentrations on fine day next to rainy day. Furthermore, we evaluated Cry j 1 denaturation by using the Biacore J system based on the surface plasmon resonence (SPR) principle and sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). We showed that the dissociation constant ($K_D$) of Cry j 1 that has been exposed to urban polluted air is lower ($1.76{\times}10^{-14}$ M) than that of Cry j 1 ($1.32{\times}10^{-9}-3.37{\times}10^{-9}$ M) of original pollen grains that has not been exposed to air pollutants. Cry j 1 turns into low molecular weight proteins by reacting with various acidic solutions. In sum, we showed that allergenic Cry j 1 exists as fine particles that can deposit in the lower respiratory tract. This finding clarifies the relationship between Japanese cedar pollinosis and air pollutants.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.353-353
• /
• 2008

Carbon nanotubes (CNTs) are attractive for field emitter because of their outstanding electrical, mechanical, and chemical properties. Several applications using CNTs as field emitters have been demonstrated such as field emission display (FED), backlight unit (BLU), and X-ray source. In this study, we fabricated a CNT cathode using transparent ultra-thin CNT film. First, CNT aqueous solution was prepared by ultrasonically dispersing purified single-walled carbon nanotubes (SWCNTs) in deionized water with sodium dodecyl sulfate (SDS). To obtain the CNT film, the CNT solution in a milliliter or even several tens of micro-litters was deposited onto a porous alumina membrane through vacuum filtration process. Thereafter, the alumina membrane was solvated by the 3 M NaOH solution and the floating CNT film was easily transferred to an indium-tin-oxide (ITO) glass substrate of $0.5\times0.5cm^2$ with a film mask. The transmittance of as-prepared ultra-thin CNT films measured by UV-Vis spectrophotometer was 68~97%, depending on the amount of CNTs dispersed in an aqueous solution. Roller activation, which is a essential process to improve the field emission characteristics of CNT films, increased the UV-Vis transmittance up to 93~98%. This study presents SEM morphology of CNT emitters and their field emission properties according to the concentration of CNTs in an aqueous solutions. Since the ultra-thin CNT emitters prepared from the solutions show a high peak current density of field emission comparable to that of the paste-base CNT emitters and do not contain outgassing sources such as organic binders, they are considered to be very promising for small-size-but-high-end applications including X-ray sources and microwave power amplifiers.