• Advances in concrete construction
• /
• 제9권3호
• /
• pp.279-287
• /
• 2020

This paper focuses on the engineering properties of Bentonite-Cement-Sodium silicate (BCS) grout, which was prepared by partially replacing the ordinary Portland cement in Cement-Sodium silicate grout with lithium bentonite (Li-bent) and sodium bentonite (Na-bent), respectively. The effect of different Water-to-Solid ratio (W/S) and various replacement percentages of bentonite on the apparent viscosity, bleeding, setting time, and early compressive strength of BCS grout were investigated. The XRD method was used to detect its hydration products. The results showed that both bentonites played a positive role in the stability of BCS grout, increased its apparent viscosity. Na-bent prolonged the setting time of BCS, while 5% of Li-bent shortened the setting time of BCS. The XRD analysis indicated that the hydration products between the mixture containing Na-bent and Li-bent did not differ much. Using bentonite as supplementary cementitious material (SCM) to replace partial cement is a promising way to cut down on carbon dioxide emissions and to produce low-cost, eco-friendly, non-toxic, and water-resistant grout. In addition, Li-bent was superior to Na-bent in improving the strength and the thickening of BCS grouts.

• Geomechanics and Engineering
• /
• 제14권6호
• /
• pp.553-562
• /
• 2018

Road construction is becoming increasingly important in marine and desert areas due to population growth and economic development. However, the load carrying capacity of pavement is of gear concern to design and geotechnical engineers because of the poor engineering properties of the soils in these areas. Therefore, stabilization of the soils is regarded as an important issue. Besides, due to the fuels combustion and carbonate decomposition, cement industry generates around 5% of global $CO_2$ emission. Thus, using bentonite as a natural pozzolan in soil stabilization is more eco-friendly than using cement. The aim of this research is to experimentally study of the stabilized marine and desert sands using deep mixing method by ordinary Portland cement and sodium bentonite. Different partial percentages of cement along with different weight percentages of sodium bentonite were added to the sands. Unconfined compression test (UCS), Energy Dispersive X-ray (EDX), and Scanning Electron Microscope (SEM) were conducted on the specimens. Moreover, a mathematical model was developed for predicting the strength of the treated soils.

• 한국지반공학회지:지반
• /
• 제13권2호
• /
• pp.17-28
• /
• 1997

이 연구에서는 화학액으로서 해안가에서 쉽게 영향 받는 염분을 사용하였다. 염분 용액으로 포화된 모래 벤토나이트 혼합토를 사용하여 압밀 비배수 삼축압축 시험을 실시하였다. 변형과 강도정수를 삼축압축시험을 통하여 구속응력과 염수의 농도 변화에 따라 구하였다. 실험 결과 영수로 포화된 흙과 벤토나이트의 점착력은 염수의 농도가 증가함에 따라 증가하며 내부마찰각은 변화가 없고 탄성계수는 증가하는 것으로 나타났다.

• 대한화학회지
• /
• 제17권1호
• /
• pp.47-52
• /
• 1973

우리나라 영일산 Bentonite를 0.5-6 N NaOH로 $70-90^{\circ}C$에서 $Na_2:SiO_2$의 비율로 $1:1{\sim}4:1$로 2-30일의 범위에서 처리하여 그 겨정성의 변화를 X선회절법으로 조사하였다. 그 결과 2N NaOH로 $70^{\circ}C$에서 Zeolite Species가 좋은 수율로 생성되었다. 그러나 NaOH의 농도가 더 크고 온도가 더 높으면 이 Zeolite는 Hydrozysodalite로 변한다. 이 결정 외에도 처리조건에 따라서는 raujasite, sodium A zeolite, mordemite등의 결정도 소량 생겼다.

• Geomechanics and Engineering
• /
• 제16권1호
• /
• pp.71-83
• /
• 2018

Compacted bentonites were chosen as the backfill material and buffer in high level nuclear waste disposal due to its high swelling pressure, high ion adsorption capacity and low permeability. It is essential to estimate the swelling pressure in design and considering the safety of the nuclear repositories. The swelling pressure model of expansive clay colloids was developed based on Gouy-Chapman diffuse double layer theory. However, the diffuse double layer model is effective in predicting low compaction dry density (low swelling pressure) for certain bentonites, and invalidation in simulating high compaction dry density (high swelling pressure). In this paper, the new relationship between nondimensional midplane potential function, u, and nondimensional distance function, Kd, were established based on the Gouy-Chapman theory by considering the variation of void ratio. The new developed model was constructed based on the published literature data of compacted Na-bentonite (MX80) and Ca-bentonite (FoCa) for sodium and calcium bentonite respectively. The proposed models were applied to re-compute swelling pressure of other compacted Na-bentonites (Kunigel-V1, Voclay, Neokunibond and GMZ) and Ca-bentonites (FEBEX, Bavaria bentonite, Bentonite S-2, Montigel bentonite) based on the reported experimental data. Results show that the predicted swelling pressure has a good agreement with the experimental swelling pressure in all cases.

• 한국지반신소재학회논문집
• /
• 제18권2호
• /
• pp.1-10
• /
• 2019

본 연구에서는 칼슘 벤토나이트를 차수재로 활용하기 위해 칼슘 벤토나이트-모래 혼합물의 투수특성 및 구조를 평가하였다. 본 연구에서는 칼슘 벤토나이트와 모래에 대한 기본적인 물리 화학적 특성 분석, 다짐시험, 투수시험 및 전자주사현미경 분석(SEM)을 진행하였다. 칼슘 벤토나이트의 혼합 비율이 증가함에 따라 칼슘 벤토나이트-모래 혼합물의 건조 밀도, 투수계수는 낮아지고 최적함수비는 증가하였다. 특히, 전자주사현미경 분석은 칼슘 벤토나이트의 비율이 증가함에 따라 칼슘 벤토나이트 내 몬모릴로나이트의 면적이 증가하는 것을 확인하였다. 결론적으로, 칼슘 벤토나이트의 혼합비가 40% 이상일 때 매립시설의 차수재 조건($1.0{\times}10^{-7}cm/sec$ 이하)을 만족하였다. 본 연구는 차수재로 칼슘 벤토나이트의 이해도를 향상시킬 수 있다. 칼슘 벤토나이트는 40% 이상 혼합 시 나트륨 벤토나이트 7%와 비슷한 투수 특성을 나타낸다. 따라서 칼슘 벤토나이트는 차수재로써 활용이 가능하다.

• 한국지반신소재학회논문집
• /
• 제1권1호
• /
• pp.43-51
• /
• 2002

본 연구에서는 차수재의 차수성를 결정짓는 벤토나이트 팽윤재를 이용하여 증류수, 침출수, 바닷물 및 3% NaCl 용액등의 반응물에 대한 자유팽윤도를 측정하였으며 Poly(acrylic acid)와 PVA(polyvinyl Alcohol), SCMC(Sodium Carboxymethyl Cellulose)를 각각 첨가한 벤토나이트의 자유팽윤도의 변화를 비교 평가하였다. 또한 바닷물에서의 토목섬유점토차수재의 투수계수를 측정하였으며 바닷물이 차수성에 어떤 영향을 미치는지 확인하였다. 벤토나이트의 평균 자유팽윤도는 증류수>침출수>바닷물 순으로 감소하였다. 바닷물에서와 3% NaCl 용액에서의 자유팽윤도 값은 근소한 차이를 보였다. Poly(acrylic acid)가 첨가된 벤토나이트는 모든 반응물에서 팽윤성 향상을 나타내었고 PYA가 첨가된 벤토나이트는 증류수를 제외한 반응물에서는 팽윤성 향상을 보이지 않았다. SCMC가 첨가된 벤토나이트의 팽윤성은 3% NaCl 용액에서 다소 자유팽윤도가 떨어지나 전반적으로 팽윤성이 향상되었다.

• 한국세라믹학회지
• /
• 제16권4호
• /
• pp.201-205
• /
• 1979

Domestic Yungil bentonite (montmorillonite) was treated with 1N sodium hydroxide solution in an autoclave at several temperatures, between 100 to 200℃, for 1 to 24 hrs. The products were examined by X-ray diffraction analysis. The following concecutive reaction was valid. montmorillonite→amorphous aluminosilicate→analcime The reaction rate constants k and k' at 200℃ were 0.35hr-1 and 0.22hr-1, respectively. The activation energies for the conversion from montmorillonite to amorphous aluminosilicate and from amorphous aluminosilicate to analcime were 10 kcal/mol and 12kcal/mol, respectively.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2010년도 제3회 국제학회
• /
• pp.68-69
• /
• 2010

• 한국환경복원기술학회지
• /
• 제3권1호
• /
• pp.52-61
• /
• 2000

Permeability is important factor in the geotechnical problems, such as seepage discharge and dissipation of excess pore water pressure. The Kozeny-Carman equation works well for graded soils but serious discrepancies are found in clays. Major factor for these discrepancies is the tortuous flow path and unequal pore size. To estimate the permeability of fine grained soils, a permeability equation in which swelling potential is coupled with Kozeny-Carman equation is proposed in this study. To verify proposed equation, a series of variable head permeability test was carried out for steel making slag and sludge mixed with bentonite. The coefficients of permeability which is measured in the laboratory is compared with the values by the proposed equation. From the comparison, it is shown that the proposed equation can predict the coefficient of permeability of clays with satisfaction. As steel making slag and sludge is industry waste, it is reused as material of road foundation and cement but the rate of use is low. It mixed sodium-bentonite with high swelling property and permeability decrease effect. Then, Admixture investigates reuse possibility as liner of waste fill.