• Journal of Environmental Science International
• /
• v.5 no.2
• /
• pp.203-210
• /
• 1996

To improve coagulation characteristics and to reduce dossage of chemicals in watertreatment, polyaluminium sulfate was manufactured by reaction of polymerization between aluminium sulfate and sodium aluminate. As the results of affirmation and performance test, the yield of product was about 24% from molecular cut on levels by ultrafilteration method. The type of molecular is nearly affirmated as a kind of complex like AIm(OH)n(3m-n)+ from Scanning Electron Microscopy (S.E.M.) and X-ray diffraction test. Since the synthesized polymer was supposed to be quasi, further study for stabilization was required.

• Journal of the Korean Ceramic Society
• /
• v.37 no.10
• /
• pp.987-993
• /
• 2000

Bayer 공정은 보오크사이트로부터 수산화알루미늄을 추출시키는 가장 일반적인 방법으로서 공정 조건에 따라 수산화알루미늄의 1차입자경, 입도분포도 및 생산효율 등이 달라지게 된다. 이러한 수산화알루미늄의 특성에 영향을 미치는 석출인자로는 가성소다 농도, 석출온도, 종자투입량 및 알루미나와 가성소다 농도비 등이 있다. 본 실험에서는 이러한 각각의 인자들이 수산화알루미늄 석출시 입자성장에 미치는 영향을 연구하였다. 그 결과 입자성장에 가장 큰 영향력을 미치는 인자는 석출온도와 종자 투입량이며 A/C비 및 가성소다 농도는 큰 영향을 주지 않음을 알 수 있었다.

• Journal of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.149-155
• /
• 1988

Pentasil zeolites, including ZSM-5, ZSM-8, ZSM-11 and silicalites, were synthesized using various organic cations. Synthesis run was carried out in a Parr pressure reactor of $2{\ell}$ capacity and a self-constructed reactor with a magnetic stirring system. The reactant materials used are colloidal silica (Snowtex), sodium aluminate, sodium chloride, TEA, TPA, TBA, Choline and water. The composition of starting materials and the reaction temperature were found to be important factors for the synthesis of uniform pentasil zeolites.

• Applied Chemistry for Engineering
• /
• v.16 no.2
• /
• pp.267-274
• /
• 2005

Preparation of cellulose type underwater non-segregation admixture was attempted and the hardening characteristics of underwater concrete according to the addition of this admixture was investigated in order to make underwater concrete with the compressive strength ratio of 0.8 to that of concrete manufactured in common atmosphere. The proposed underwater non-segregation admixture consisted of methyl cellulose of 0.4% by weight, silicon type antifoaming agent of 20% by weight, and sodium aluminate of 0.1% by weight to the amount of cement as setting accelerant, respectively. As the proposed non-segregation admixture was increased, the amount of suspended solid decreased, air content in concrete was increased but the flow loses by elapsed time did not change. The proper amount added of the proposed non-segregation adimixture was 0.8 wt% to the amount of cement. The compressive strength of the test sample underwater concrete manufactured by the addition of the proposed admixture was $325Kg/cm^3$, and the ratio of compressive strength of this sample concrete to that of a concrete manufactured in air was 0.94.

• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.4
• /
• pp.209-216
• /
• 2011

Surface coatings were prepared on SKD11 core mold steel by plasma electrolytic oxidation (PEO). The coatings were investigated about the formation condition of core mold steel. SKD11 were coated by PEO in a mix solution of Sodium Aluminate $NaAlO_2$ (10 g/l), Sodium Silicate powder $Na_2SiO_3$ (0.5 g/l), Sodium tungstate dihydrate $Na_2WO_42H_2O$ (0.5 g/l) at less than $30^{\circ}C$. The electrical condition were voltage : 500~600 V; Pulse : 600~1800 Hz; current density 15~20 $A/dm^2$ various time : 3 min~40 min. The coatings surface morphology, cross-section, friction coefficient, hardness were investigated. The PEO coatings on SKD11 core mold steel showed the extended service life.

• KSBB Journal
• /
• v.26 no.2
• /
• pp.143-150
• /
• 2011

The aim of the study was to optimize harvesting method for concentrating microalgae from microalgae mass culture. It is well known that the mass density of microalgae is usually very low and these are small size (5-20 ${\mu}m$) in the culture medium. It is essential that microalgae is harvested and concentrated economically for economical biodiesel production from microalgae. In this study, to determine optimized conditions for microalgae harvesting by chemical flocculation. Flocculation of three algae, Chlorella ellipsoidea, Dunaliella bardawil, and Dunaliella tertiolecta, was performed using various chemical flocculants, such as inorganic flocculants (aluminium sulfate, aluminium potassium sulfate, ferrous sulfate, ferric sulfate, ferric chloride, calcium hydroxide, sodium carbonate, sodium nitrite, and sodium aluminate), organic flocculant (polyacrylamide), and biopolymer flocculants (chitosan and starch). The results indicated that aluminium based inorganic flocculants is suitable for microalgae harvesting such as Chlorella ellipsoidea, Dunaliella bardawil, and Dunaliella tertiolecta. The results also recommended that flocculant doses, agitation speed, agitation time, sedimentation time for economical microalgae harvesting method using chemical flocculants.

• Journal of the Korean Ceramic Society
• /
• v.26 no.4
• /
• pp.575-582
• /
• 1989

The effects of raw material feeding procedures and gelation temperatures on zeolite synthesis are investigated. Thus, the synthesis of zeolite 4A from sodium aluminate and sodium silicate solutions is chosen as a model reaction, for which equi-molar hydrogelation is performed with variation of feeding procedures and gelation temperatures. The formation of crystal nuclei, often being referred to as precursors, is induced under different conditions, the variation being examined by means of viscosity and water contents. The final products of zeolite 4A are evaluated by XRD, SEM morphology, particle size analysis and cation exchange capacity. Evidence shows that the viscosity of the initial products and their water contents are markedly influenced by the feeding methods of the reactant materials and by the gelation temperature. Further, it is found that the gelation at an elevated temperatures near 7$0^{\circ}C$ can be made possible through modification of mixing procedures. This provides convenient means of controlling the particle size of the final products. In this regard, a continuous flow-type mixing technique is proposed, which is demonstrated to be superior to the conventional batch-type mixings. The significance of this finding may lie in savings of equipment as well as energy costs, especialy on a large scale commercialization of zeolite production.

• Journal of the Korean Ceramic Society
• /
• v.38 no.3
• /
• pp.267-273
• /
• 2001

Bayer process는 보오크사이트로부터 수산화알루미늄을 추출시키는 가장 일반적인 방법으로서 공정 조건에 따라 수산화알루미늄의 1차입자경, 입도분포도 및 생산효율 등이 달라지게 된다. 이러한 수산화알루미늄의 특성에 영향을 미치는 석출인자로는 석출시간, 석출온도차($\Delta$T), 종자 첨가시 함께 투입되는 공정순환액(spent liquor) 및 종자크기 등이 있다. 본 실험에서는 이러한 각각의 인자들이 수산화알루미늄 석출시 입자성장에 미치는 영향을 연구하였다. 그 결과 석출시간이 길수록, 정온석출 보다는 냉각석출의 경우가, 또한 공정순환액이 첨가되지 않을수록 석출율은 증가하나 입자크기에는 영향을 주지 않았으며 입자성장에 가장 큰 영향력을 미치는 인자는 투입 종자크기로 나타났다.

• Journal of environmental and Sanitary engineering
• /
• v.12 no.1
• /
• pp.49-58
• /
• 1997

A study on the synthesis of zeolite from bituminous coal ESP fly ash as a raw material, which was emitted from the power plant, was carried out to reduce environmental problems and reuse of the industrial wastes. Bituminous coal fly ash was used as the source of silica and alumina. Zeolite was synthesized by hydrothermal reaction in aqueous NaOH solution with sodium aluminate as additive. The objective of this study is to elucidate the effect of several experimental variables on the synthesis of zeolite. The effects of preroasting temperature, mixing speed, leaching alkalinity, and molar ratio of Na$_{2}$O/SiO$_{2}$ and SiO$_{2}$/Al$_{2}$O of the products were investigated. The synthesized zeolite was proved to be NaA, which is known as 4A type, by comparing with SEM images, and X-ray diffraction analysis. And also we know that the transformation of zeolite A take places into other types of zeolites, i.e. Hydroxysodalite, zeolite P, with the variation of leaching alkalinity.

• Journal of the Korean Ceramic Society
• /
• v.36 no.7
• /
• pp.725-733
• /
• 1999

It is a fundamental experiment to use blast-furnace slag in solidification/stabilization process. The compressive strength and leaching test of Pb and Cr doped samples were evaluated and the effects of heavy-metal ions on the hydration of slag was investigated. Sodium silicates(5wt%) was added as alkali-activator and the effects of replacing a part of slag with flyash or gypsum was also discussed. Pb ion was solidified by encapsulation of matrix. In of slag${\pm}$gypsum binder microstructure was densified by accelerating to form AFt/AFm phase and compressive strength was improved resulting in reducing leaching amount of Pb ion. Cr ion was solidified by substituting with Al ion in aluminate product. Slag+fly ash binder improved compressive strength and decreased leaching amount of Cr ion.