• Korean Journal of Agricultural Science
• /
• v.6 no.1
• /
• pp.21-26
• /
• 1979

To compare the effect of dikegulac (sodium 2,3 : 4, 6-di-O-isopropylidene-2-keto-L-gulonate) and ancymidol (${\alpha}$-cyclopropyl-${\alpha}$-(4-methoxyphenyl)-5-pyrimidinemethanol) on the growth and flowering responses of Salvia splendens cv. Bonfire, foliar spray of dikegulac at rates of 0.06 and 0.12% and ancymidol at rates of 50 and 100 ppm, and soil drench of ancymidol at rates of 0.1 and 0.5 mg/pot were treated. Dikegulac reduced the plant height and induced the lateral shoot development by disrupting apical dominance, and thus increased the number of inflorescences and retarded flowering date. Dikegulac treatment greatly increased chlorophyll content of leaf, especially chlorophyll a. Ancymidol reduced the plant height without disrupting apical dominance and retarding flower ing date, but did not increase inflorescence number except soil drench at rate of 0.1 mg/pct. Ancymidol treatment significantly increased chlorophyll content of leaf, especially chlorophyll a. Dikegulac can be effectively used as a pinching agent and branching agent for salvia.

• Journal of dental hygiene science
• /
• v.10 no.4
• /
• pp.295-300
• /
• 2010

The aim of this study were to elucidate effects of fluoridated bleaching agents and post-treatment fluoride application on the color and microhardness of enamel surface. Twenty freshly extracted human adult molar were each sectioned into halves, the specimens divided and treated according to four experimental groups: 1, untreated controls: 2, treatment with 10% carbamide peroxide (CP) bleaching agent; 3, treatment with 10% CP containing 0.11% fluoride; 4, treatment with 10% CP followed by a 0.9% sodium fluoride gel application. Group 2-4 were compared with the baseline data. treated 8 h per day for 14 days then immersed in distilled water for 2 weeks. Changes in enamel color and microhardness were evaluated on Days 7 and 14. All the bleached enamel specimens revealed increased whiteness and overall color value. Groups 2 and 4 showed significantly decreased enamel microhardness compared to their baseline. The specimens treated with fluoridated bleaching agents showed relatively less reduction in enamel microhardness than those treated with nonfluoridated agents during the bleaching treatment. The addition of fluoride did not impede the tooth whitening. The fluoridated bleaching agents reduced the microhardness loss of enamel.

• The Journal of Dong Guk Oriental Medicine
• /
• v.2 no.1
• /
• pp.19-54
• /
• 1993

To see both $Sh{\grave{u}}nq{\grave{i}}daot{\acute{a}}nt{\bar{a}}ng$(dissipate phlegm and promote vital energy circulation) and $Hu{\grave{a}}y{\bar{u}}t{\bar{a}}ng$(blood circulation and disperse blood stasis) influencing on thrombosis, contusion-hyperemia, and hyperlipidemia, at first we measured the density of FDP, the quantity of fibrinogen, prothrombin time, and the number of platelet of rat taken thrombosis by endotoxin. Secondly we measured the increase-rate of "paw swelling", the number of platelet, the quantity of fibrinogen, and prothrombin time of rat taken contusion-hyperemia. And then we measured the quantity of total cholesterol in serum and of H.D.L-cholesterol and of triglyceride and of phospholipid and of ${\beta}-lipoprotein$, its weight, and the variation of the quantity of electrolyte of rat taken hyperlipidemia by the oral-injection of choleserol. As a result, we can conclude as follows : 1. Out of the test of thrombosis, we can recognize not only the noticeable increae of the number of platelet and the quantity of fibrinogen, but also the noticeable decrease of prothrombin time and the density of FDP in case of $Sh{\grave{u}}nq{\grave{i}}daot{\acute{a}}nt{\bar{a}}ng$-injected rat and $Hu{\grave{a}}y{\bar{u}}t{\bar{a}}ng$-injected rat. 2. Out of the test of contusion-hyperemia, we can recognize not only the noticeable increase of the number of platelet and the quantity of fibrinogen, but also the noticeable decrease of prothrombin time and "increase-rate of paw swelling" in case of $Sh{\grave{u}}nq{\grave{i}}daot{\acute{a}}nt{\bar{a}}ng$-injected rat and $Hu{\grave{a}}y{\bar{u}}t{\bar{a}}ng$-injected rat. 3. Out of the test of hyperlipidemia, at first we can recognize that test rat's weight increased as close as that of normal rat. And we can recognize the noticeable decrease of the triglyceride and phospholipid and ${\beta}-lipoprotein$." Also, in case of the variation of electrolyte we can recognize the decrease of calcium and potassium in $Sh{\grave{u}}nq{\grave{i}}daot{\acute{a}}nt{\bar{a}}ng$-injected rat, and of sodium and magnesium in $Hu{\grave{a}}y{\bar{u}}t{\bar{a}}ng$-injected rat. Thus, as the above-mentioned, in covering thrombosis, contusion-hypermia, and hyperlipidemia, the effect of $Sh{\grave{u}}nq{\grave{i}}daot{\acute{a}}nt{\bar{a}}ng$ and $Hu{\grave{a}}y{\bar{u}}t{\bar{a}}ng$ can be recognized. Granting that $Hu{\grave{a}}y{\bar{u}}t{\bar{a}}ng$ reveals its effectiveness in thrombosis and contusion-hyperemia, and $Sh{\grave{u}}nq{\grave{i}}daot{\acute{a}}nt{\bar{a}}ng$ in hyperlipidemia, it can be inferred that contusion-hyperemia is like "model of blood stasis form" as thrombosis and hyperlipidemia "phlegm-retention diseases form", and both phlegm-retention and blood stasis have correlation each other.

• Journal of the Korean Dietetic Association
• /
• v.23 no.3
• /
• pp.263-273
• /
• 2017

Numerous studies have investigated quantifying dietary intake according to the weight status of children and adolescents. However, studies on differences in quality among diets remain scarce. This study compared diet quality by weight status and examined correlations between quality of diet and obesity in children and adolescents. Two hundred fourteen children and adolescents aged between 9 and 18 years participated in this study (Normal weight n=104, Obesity n=110). The data related to food intake were investigated by dietary records, Diet Quality Index-International (DQI-I), and Nutrition Quotient (NQ) and then compared with Dietary Reference Intakes for Korean (KDRIs). In DQI-I, moderation factor (control of unhealthy foods) score was 21.7 in the normal weight group and 19.5 in the obesity group. The normal weight group showed a higher score for moderation factor than the obesity group (P<0.001). Compared with KDRIs, vitamin $B_6$, folate, vitamin C, vitamin E, calcium, potassium, and zinc intakes were insufficient in both groups. Multiple logistic regression analysis revealed that DQI-I moderation was negatively associated with obesity (OR=0.77, 95% CI 0.69-0.87) after adjustment for age, gender, income, and total energy intake. Our results suggest that children and adolescents require nutritional education to understand the importance of vitamin and mineral consumption. Especially, education for children and adolescents with obesity needs to emphasize moderation of nutrient intake that can cause diseases with hyper-ingestion such as sodium and high calorie-low nutrition foods.

• Composites Research
• /
• v.13 no.4
• /
• pp.42-53
• /
• 2000

A study has been made to establish an optimum condition in the surface treatment and curing method that is important for the fabrication of Al 7075/CFRP laminates. PAA(Phosphoric Acid Anodizing) provided a good adhesive strength and FPL(Sulfuric / Sodium Dichromate Acid Etching) had a similar adhesive strength with PAA. On the other hand, the poor adhesive strength was shown on vapor degrease and CAA(Chromic Acid Anodizing). By using the atomic force microscope(AFM), it was found that the PAA oxide surface obviously had a greater degree of microroughness as compared to vapor degrease, CAA and FPL treated surfaces. These results support the concept of a mechanical interlocking of the adhesive with-in the oxide pores as the predominant adhesion mechanism. In curing methods, the adhesive strength of co-curing method was higher than that of secondary curing method. With respect to stability of specimen shape, the secondary curing method was better than co-curing method. DMA(Dynamic Mechanical Analysis) test revealed $T_g$ in curing times over 60 min is nearly same, so it is estimated they will have similar degree of curing and joint durability in using FM300M adhesive film.

• Advances in concrete construction
• /
• v.10 no.2
• /
• pp.171-183
• /
• 2020

The main objective of this study is the assessment of the ability of limestone mortars to resist to different chemical attacks. The ability of polypropylene (PP) fibres waste used as reinforcement of these concrete materials to enhance their durability is also studied. Crushed sand 0/2 mm which is a fine limestone residue obtained by the crushing of natural rocks in aggregates industry is used for the fabrication of the mortar. The fibres used, which are obtained from the waste of domestic plastic sweeps' fabrication, have a length of 20 mm and a diameter ranging between 0.38 and 0.51 mm. Two weight fibres contents are used, 0.5 and 1%. The durability tests carried out in this investigation included the water absorption by capillarity, the mass variation, the flexural and the compressive strengths of the mortar specimens immersed for 366 days in 5% sodium chloride, 5% magnesium sulphate and 5% sulphuric acid solutions. A mineralogical analysis by X-ray diffraction (XRD) and a visual inspection are used for a better examination of the quality of tested mortars and for better interpretation of their behaviour in different solutions. The results indicate that the reinforcement of limestone mortar by PP fibres waste is an excellent solution to improve its chemical resistance and durability. Moreover, the presence of PP fibres waste does not affect significantly the water absorption by capillarity of mortar nether its mass variation, when exposed to chloride and sulphate solutions. While in sulphuric acid, the mass loss is higher with the presence of PP fibres waste, especially after an exposure of 180 days. The results reveal that these fibres have a considerable effect of the flexural and the compressive behaviour of mortar especially in acid solution, where a reduction of strength loss is observed. The mineralogical analysis confirms the good behaviour of mortar immersed in sulphate and chloride solutions; and shows that more gypsum is formed in mortar exposed to acid environment causing its rapid degradation. The visual observation reveals that only samples exposed to acid attack during 366 days have showed a surface damage extending over a depth of approximately 300 ㎛.

• Journal of Ginseng Research
• /
• v.39 no.4
• /
• pp.398-405
• /
• 2015

Background: Ginseng has been used as a tonic for invigoration of the human body. In a previous report, we identified a novel candidate responsible for the tonic role of ginseng, designated gintonin. Gintonin induces $[Ca^{2+}]_i$ transient in animal cells via lysophosphatidic acid receptor activation. Gintonin-mediated $[Ca^{2+}]_i$ transient is linked to anti-Alzheimer's activity in transgenic Alzheimer's disease animal model. The previous method for gintonin preparation included multiple steps. The aim of this study is to develop a simple method of gintonin fraction with a high yield. Methods: We developed a brief method to obtain gintonin using ethanol and water. We extracted ginseng with fermentation ethanol and fractionated the extract with water to obtain water-soluble and water-insoluble fractions. The water-insoluble precipitate, rather than the water-soluble supernatant, induced a large $[Ca^{2+}]_i$ transient in primary astrocytes. We designated this fraction as gintonin-enriched fraction (GEF). Results: The yield of GEF was approximately 6-fold higher than that obtained in the previous gintonin preparation method. The apparent molecular weight of GEF, determined using sodium dodecyl sulfate-polyacrylamide gel electrophoresis, was equivalent to that obtained in the previous gintonin preparation method. GEF induced $[Ca^{2+}]_i$ transient in cortical astrocytes. The effective dose (ED50) was $0.3{\pm}0.09{\mu}g/mL$. GEF used the same signal transduction pathway as gintonin during $[Ca^{2+}]_i$ transient induction in mouse cortical astrocytes. Conclusion: Because GEF can be prepared through water precipitation of ginseng ethanol extract and is easily reproducible with high yield, it could be commercially utilized for the development of gintoninderived functional health food and natural medicine.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.3 s.47
• /
• pp.409-414
• /
• 2004

Kojic acid is well known for its anti-pigmentation effect with tyrosinase inhibition activity. However, kojic acid is a unstable compound. In order to improve stability, kojic acid derivative, kojic acid $6-O-2',3',4',6'-tetraacetyl-{\beta}-D-glucopy-ranoside\;(KTGP)$, was synthesized with $O-pentaacetyl-{\beta}-D-glucose$ through the regio- and stereo-selective glycosylation of 6-OH group of kojic acid. High yield $(80\%)$ was obtained by the use of Lewis acid and organic base in nonpolar solvent. Hydrolysis of KTGP with the aid of sodium methoxide in methanol afforded kojic acid $6-O-{\beta}-D-glucopyranoside$ (KGP), which was confirmed by $^1H-NMR\;and\;^{13}C-NMR$ KGP is freely soluble in water and soluble in methanol and ethanol. Inhibition activity of KGP for tyrosinase was investigated by measuring the activity of mushroom tyrosinase compared with those of ascorbic acid, kojic acid, and arbutin. The free radical-scavenger activity was determined by the 1,1-diphenyl- 2-picrylhydrazyl (DPPH) assay. In toxicity assay, KGP was much less toxic than kojic acid and arbutin, Therefore, glycosylation of kojic acid may be useful for the development of stable kojic acid derivatives.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.3 s.47
• /
• pp.369-375
• /
• 2004

In this study, liquid crystalline (LC) is formed using Gemini surfactant (GS) type and moisturizing effect in vivo is measured. $3.0\;wt\%$ of sodium dicocoyl ethylene diamine (PEG)-15 sulfate (SCD-PEG-15S) is used as GS and $4.0\;wt\%$ of hydrogenated dimer acid esters (HDAE) as booster. For stabilizers, $2.0\;wt\%$ of behenyl alcohol (BA) and $1.0\;wt\%$ of Iyso-lecithin (LyL) are utilized. It is stabilized in pH from 4.0 to 10.5 and the best condition is in pH 6.5. The value of viscosity is $8,000\pm500$ cP. The most excellent particles are formed within the range of 4.0 to 15.5 um. Formed LC is observed around LC particles using polarization microscope. It is also observed that lamellar gel network structure is formed around LC particles. Moisturizing effect is improved by $13.6\%$ (P<0.05) compared to control when measured 30 min later after coating samples. After 1 h, moisturizing effect is improved by 1$12.6\%$ (P<0.05) than control while showing $28.3\%$ (P<0.05) of improvement after 4 h. These results may be caused from that manufactured LC forms lamellar structure so that it has better water-holding ability and absorbance of oil increases. This formula could be utilized by delivery system (DS) on skin so that this technology can be applied for manufactuing pharmaceuticals and cosmetics.

• Current Optics and Photonics
• /
• v.2 no.3
• /
• pp.269-279
• /
• 2018

We are currently investigating the feasibility of a 1.6 m telescope with a laser-guide star adaptive optics (AO) system. The telescope, if successfully commissioned, would be the first dedicated adaptive optics observatory in South Korea. The 1.6 m telescope is an f/13.6 Cassegrain telescope with a focal length of 21.7 m. This paper first reviews atmospheric seeing conditions measured over a year in 2014~2015 at the Bohyun Observatory, South Korea, which corresponds to an area from 11.6 to 21.6 cm within 95% probability with regard to the Fried parameter of 880 nm at a telescope pupil plane. We then derive principal seeing conditions such as the Fried parameter and Greenwood frequency for eight astronomical spectral bands (V/R/I/J/H/K/L/M centered at 0.55, 0.64, 0.79, 1.22, 1.65, 2.20, 3.55, and $4.77{\mu}m$). Then we propose an AO system with a laser guide star for the 1.6 m telescope based on the seeing conditions. The proposed AO system consists of a fast tip/tilt secondary mirror, a $17{\times}17$ deformable mirror, a $16{\times}16$ Shack-Hartmann sensor, and a sodium laser guide star (589.2 nm). The high order AO system is close-looped with 2 KHz sampling frequency while the tip/tilt mirror is independently close-looped with 63 Hz sampling frequency. The AO system has three operational concepts: 1) bright target observation with its own wavefront sensing, 2) less bright star observation with wavefront sensing from another bright natural guide star (NGS), and 3) faint target observation with tip/tilt sensing from a bright natural guide star and wavefront sensing from a laser guide star. We name these three concepts 'None', 'NGS only', and 'LGS + NGS', respectively. Following a thorough investigation into the error sources of the AO system, we predict the root mean square (RMS) wavefront error of the system and its corresponding Strehl ratio over nine analysis cases over the worst ($2{\sigma}$) seeing conditions. From the analysis, we expect Strehl ratio >0.3 in most seeing conditions with guide stars.