• 한국군사과학기술학회지
• /
• 제13권1호
• /
• pp.114-119
• /
• 2010

There are a number of studies on chemically strengthened glass. Most of them are strengthened in molten salt bath below transformation range of glass. This research is distinguished from the aforementioned studies in that single $KNO_3$ powder was used by employing screen printing technique. In this study soda-lime-silicate(SLS) glasses for bulletproof glass application with various thicknesses were used. The maximum value of the bending strength is 791MPa heat treated at $480^{\circ}C$, which is about 4.3 times higher than the parent glass, which is the highest strength of all soda-lime glasses. In this study, it is also observed that Vickers hardness increased to $657H_v$, which is about 15% higher than the parent glass($568.7H_v$) and fracture toughness was not changed. Depth profiles measured by electron probe micro analyzer(EPMA) showed a correlation between the migrations of $K^+$ ions with bending strength of ion exchanged glasses.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1625-1627
• /
• 2000

Cu(InGa)$Se_2$(CIGS) thin film absorbers with various Cu/(In+Ga) atomic ratios were prepared by a three-stage process using a co-evaporation appartus. The effect of Na on the structural and electrical properties of CIGS films were studied and their effects on the CIGS/Mo thin film solar cells were investigated. Soda-lime glass and Corning glass were used as substrates to compare the effect of Na diffusion into CIGS film. The resistivity of CIGS films was not changed in the Cu-poor lesion due to diffusion of Na from soda-lime glass but was mainly determined by the surface resistivity controlled by excess Na.

• Composites Research
• /
• 제13권4호
• /
• pp.75-82
• /
• 2000

유리섬유/에폭시 복합재료로 피막한 유리판의 표면파괴거동을 연구하기 위하여 미소강구 충격실험을 수행하였다. 본 연구에서는 다섯 종류의 재료, 단순소다유리판(soda-lime glass plates), 유리섬유/에폭시박막(glass/epoxy lamina)을 1층 접착, 비접착한 시편과 박막을 3층 접착, 비접착한 시편을 사용하였다. 충격속도 범위 40∼120m/s에서 유리판 배면에서의 최대 응력과 흡수파괴에너지를 측정하였다. 충격 속도증가에 따라 링균열, 콘균열, 레이디얼 균열이 시편 내부에서 발생하였다. 복합재료 박막으로 피막한 결과, 소다유리판의 균열은 현저히 감소하였으며 측정한 최대 응력과 흡수파괴에너지를 이용하여 표면 파괴거동 특성을 평가할 수 있었다.

• 한국세라믹학회지
• /
• 제52권2호
• /
• pp.123-127
• /
• 2015

Soda-lime silicate (SLS) glass was strengthened by ion exchange for application of thin and lightweight bulletproof windows. The optimal conditions for ion exchanged SLS glass (thickness of 3 and 10 mm) at $480^{\circ}C$ were 10 and 17 min, respectively. The Vickers hardness values of the strengthened SLS glass samples with thicknesses of 3 and 10 mm were $5.9{\pm}0.22$ and $6.7{\pm}0.17GPa$, respectively, which values were about 22% higher than those of parent SLS glass. By laminating a multilayer defense film and polycarbonate sheet with ion exchanged SLS glass, we were able to make a thin and lightweight bulletproof window (24.25 mm, 4.57 kg, $50.06kg/m^2$, $V_{50}$ 901.8 m/s). As a result, the thickness of the bulletproof window was decreased by about 39% from 40 to 24.25 mm. The light transmittance in the visible range satisfied the standard (over 76%) for bulletproof windows.

• 한국재료학회지
• /
• 제16권12호
• /
• pp.743-746
• /
• 2006

ZTA tubes were prepared by centrifugal casting and sintered at $1600^{\circ}C$ for 2 hrs. The ZTA tubes were machined into specimens of $3{\times}4{\times}40$ mm. Molten Soda lime glass (SLG) was penetrated into the surface of ZTA at an optimized condition of $1500^{\circ}C$ for the holding time of 5 h and furnace cooled. The extra glass on the surface was removed using a resin bonded diamond wheel. The glass penetrated samples were tested for their flexural strength using four point bend test. Vickers Indentation cracks were made on the glass penetrated surface at different loads of 9.8 N, 49 N, 98 N and 196 N. The residual compression on the surface enhanced the flexural strength and crack arrest behaviour remarkably. This was attributed to the thermoelastic mismatch between the glass and ZTA matrix during cooling.

• 한국결정성장학회지
• /
• 제33권1호
• /
• pp.7-14
• /
• 2023

유리병 제조 공장에서 생산한 유리 조성을 4년간 40 차례 분석하여 Lakatos 모델로 점도를 구하였다. log η가 3, 6.6, 10, 12.3 Pa·s 일 경우의 isokom 온도를 구하여 조성과 isokom 온도와의 상관관계를 분석하였다. 조성에서 함량에 편차가 가장 큰 것은 MgO로 변동계수가 0.890이었다. 그러나 MgO 함량 편차가 점도 변화에 주는 영향은 제한적 이었다. 반면 CaO는 연화점 이하에서 비가교산소를 감소시키는 작용에 의하여 isokom 온도를 낮추고 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.136-137
• /
• 2021

The soda lime waste glass powder was dissolved in NaOH-4M solution to synthesize an alkaline activator, which was used to activate Class-C fly ash (FA). Compressive and flexural strength tests were conducted to determine the mechanical properties. Archimedes' principle was applied to measure the porosity of samples, (SEM-EDX) and XRD was used to study the microstructure and phase changes of samples. Through Inductive Coupled Plazma technique, the solution was found to increase the concentration of Si as the amount of dissolved glass powder was increased. Owing to the increased concentration of Si in an alkaline solution, the reactivity of FA was accelerated resulting in an increased strength and reduced porosity. Additionally, the dissolution of FA was improved as well as the formation of amorphous phases in the matrix was also enhances with the concentration of increased Si in an alkaline solution.

• 한국결정성장학회지
• /
• 제20권1호
• /
• pp.43-52
• /
• 2010

삼척 도계지역의 탄광에서 석탄채취시에 발생되는 석탄폐석을 이용하여 유리를 제조하였다. 소다라임계 화학조성을 갖는 유리를 제조하기 위하여 화학원료로서 소다회, 탄산칼슘 등의 원료를 추가로 사용하였고, 화학원료인 탄산칼슘 대신에 천연광물원료인 석회석을 사용하였을 때의 특성을 검토하였다. 전기로를 사용하여 $1,550^{\circ}C$에서 1시간 용응하여 투명한 유리를 제조할 수 있었다. 석탄폐석의 종류 및 파유리의 종류에 따라 다양한 종류의 유리샘플이 제조되었다. 유리샘플의 투과율 및 색차와 같은 광학적 특성을 UV/VIS/NIR Spectrometer를 이용하여 측정하였고, 또한 열팽창계수 및 연화점과 같은 열적특성도 측정하였다. 그 결과, 일반 선탄경석으로는 70% 이상의 가시광선투과율을 갖는 투명한 유리를 제조할 수 있었으며, 또한 쉘(shell) 타입의 선탄경석으로는 0~35%의 가시광선 투과율을 갖는 검정색의 칼라유리를 제조할 수 있었다. 따라서 석탄폐석을 이용하여 건축재료로서 유리타일이나 발포유리와 같은 유리 2차제품을 제조하는데 활용할 수 있으리라 판단되었다.

• 태양에너지
• /
• 제20권2호
• /
• pp.43-54
• /
• 2000

동시 진공증발법을 이용하여 coming glass, soda-lime glass, Mo가 증착된 soda-lime glass 위에 $Cu(In_{1-x}Ga_x)Se_2$ 박막을 증착하였다. Soda-lime glass 위에서 제조된 $Cu(In_{0.5}Ga_{0.5})Se_2$ 박막의 전기비저항값과 정공농도는Cu/(In+Ga)비에 큰 영향을 받지 않았다. Soda-lime glass위에서의 $Cu(In_{1-x}Ga_x)Se_2$ 박막내부와 표면에는 Na이 검출되었고, 표면의 Na는 산소와 결합하고 있었으며, Cu가 부족한 조성에서 이차상이 형성되었다. Ga/(In+Ga)비가 증가할수록 $Cu(In_{1-x}Ga_x)Se_2$ 박막은 회절 peak들의 큰 회절각으로 이동, 초격자 peak등의 분리, 결정립 크기의 감소가 관찰되었다. $Cu_{0.91}(In_{1-x}Ga_x)Se_2$ 박막은 Ga/(In+Ga)비에 무관하게 전기적으로 p-type을 나타내었다. Ag/n-ZnO /i-Zno/CdS/$Cu_{0.91}(In_{0.7}Ga_{0.3})Se_2$/Mo/glass구조의 태양전지를 제조하였으며, 태양전지변환효율(Eff.) = 14.48%, 단락전류밀도(Jsc) = $34.88mA/cm^2$, 개방전압(Voc) =581.5 mV, 충실도(F.F) = 0.714을 나타내었다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 INTERNATIONAL SYMPOSIUM ON SOIL & GROUNDWATER ENVIRONMENT
• /
• pp.59-61
• /
• 2005

In Korea, hundreds of abandoned and closed coal and metallic mines are present in the steep mountain valleys due to the depression of the mining industry since the late 1980s. From these mines, enormous amounts of coal waste were dumped on the slopes, which causes sedimentation and acid mine drainage (AMD) to be discharged directly into streams causing detrimental effects on soil and water environments. A limestone slurry by-product (lime cake) is produced from the Solvay process in manufacturing soda ash. It has very fine particles, low hydraulic conductivities ($10^{-8}{\sim}10^{-9}cm/sec$), high pH, high EC due to the presence of CaO, MgO and $CaCl_2$ as major components, and traces of heavy metals. Due to these properties, it has potential to be used as a neutralizer for acid-producing materials. A field plot experiment was used to test the application of lime cake for reclaiming coal wastes. Each plot was 20 x 5 m (L x W) in size on a 56% slope. Treatments included a control (waste only), calcite ($CaCO_3$), and lime cake. The lime requirement (LR) for the coal waste to pH 7.0 was determined and treatments consisted of adding 100%, 50%, and 25% of the LR. The lime cake and calcite were also applied in either a layer between the coal waste and topsoil or mixed into the topsoil and coal waste. Each plot was hydroseeded with grasses and planted with trees. In each plot, surface runoff and subsurface water were collected. The lime cake treatments increased the pH of coal waste from 3.5 to 6, and neutralized the pH of the runoff and leachate of the coal waste from 4.3 to 6.7.