• Korean Journal of Materials Research
• /
• v.12 no.6
• /
• pp.499-507
• /
• 2002

The carbon nanotube emitters for field emission displays were fabricated by using screen printing techniques. The pastes for screen printing are composed of organic binders, carbon nanotubes (multiwalled or singlewalled), and some additive materials. The pastes were printed on Cr-coated/Ag-printed soda-lime glass substrates. From the I-V characteristics, the turn-on field of SWNT was lower than that of MWNT. The decrease in the mesh size of screen masks (i.e. increase in the opening size of the screen mesh) resulted in decreasing the turn-on field and increasing the electron emission current. When the carbon nanotubes were mixed with silver pastes, silver powders appeared to contribute to the vertically aligning of carbon nanotubes on a glass.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.5
• /
• pp.541-544
• /
• 2004

Multi- wall carbon nanotubes(MWNTs) were synthesized by thermal chemical vapor deposition. The paste for screen printing was composed of MWNTs, organic vehicle and glass frit. Carton nanotube paste was screen-printed on ITO(indium tin oxide) deposited soda lim을 glass, and then heat treatment was performed. Before the surface treatment, turn on field of derive was 2.6 V/$\mu\textrm{m}$. After the surface treatment, the value was changed into 1.8 V/$\mu\textrm{m}$. The anode current of the derive with 2.83 V/$\mu\textrm{m}$(turn on field) was changed 4 $\mu\textrm{A}$ into 390 $\mu\textrm{A}$ at 1,700 V. Adsorption effect of MWNTs onto phosphor of anode plate was observed by the field emission measurement and resulted in bad effects on properties of devices lifetime and emission lighting.

• Journal of the Korean Ceramic Society
• /
• v.27 no.5
• /
• pp.583-588
• /
• 1990

Glass films in the binary system B2O3-SiO2 and Al2O3-SiO2 were prepared on soda-lime-silica slide glass by the dip-coating technique from TEOS and boric acid or aluminum nitrate. Thickness of the films varying with viscosity and withdrawal speed were measured and effect of composition and firing temperature on the properties such as transmittance and refractive index were investigated. nM2O3.(100-n)SiO2(M=B or Al) films containing up to 20mol% B2O3 and 40mol% Al2O3 were transparent. Maximum transmittance at visible range were obtained for the sample containing 15mol% Ba2O3 and 32.5mol% Al2O3 and heat-treated at 50$0^{\circ}C$, respectively. Refractive index of the film containing 15mol% B2O3 was mininum in the B2O3-SiO2 binary system and minimal refractive index was appeared at the film containing 32.5mol% Al2O3. In IP spectra, addition of B2O3 were increased absorption peak intensity of B-O and Si-O-B bond and addition of Al2O3 were decreased absorption peak intensity of Si-O bond, respectively.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.12
• /
• pp.607-613
• /
• 2001

Molybdenum thin films were deposited on the soda lime glass(SLG) substrates by direct-current planar magnetron sputtering, with a sputtering power density of $4.44W/cm^2$. The working pressure was varied from 0.5 mtorr to 20 mtorr to gain a better understanding of the effect of sputtering pressure on the morphology and microstructure of the Mo film. Thin films of $CU(InGa)Se_2$ (CIGS) were deposited on the Mo-coated glass by three stage co-evaporation process. The highest efficiency device was obtained at the maximum value of the tensive stress. The morphology of Mo-coated films were examined by using scanning electron microscopy The film's microstructure, such as the preferred orientation, the full width at half-maximum(FWHM), and the residual intrinsic stress were examined by X-ray diffraction.

• Korean Journal of Optics and Photonics
• /
• v.9 no.2
• /
• pp.86-91
• /
• 1998

Multimode planar waveguides have been fabricated by an electric-field assisted ion exchange in soda-lime glass substrates. Measurements of the mode indices have been made and the index profiles modeled on modified Fermi function are explained by a comparative analysis with the concentration profiles obtained using an electron probe X-ray micro analyzer. The analytical measurements showed that no more than 95% of sodium ions were replaced by the cesium ions. We established formulas for guide depth, mobility, and refractive index change, given the applied electric field, the diffusion temperature, and the time. We have verified the linear relations in the formulas not only between guide and root of diffusion time but also between guide depth and the applied electric filed experimentally.

• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.405-420
• /
• 2020

A convergence research was conducted on glass beads excavated at the ruins of Hapgang-ri, Sejong, using the archeology and conservation approach. The period of appearance of Jugu Towangmyo in the ruins of Hapgang-ri can be estimated to begin in the late 2^nd century; for Jugu Towangmyo No. 15, the period spans from the late 2^nd to early 3^rd century. Form, color, and manufacturing techniques of complete glass beads were examined, and the cross-sections and chemical composition of 16 samples were observed. Based on these analyses, the glass beads were divided into blue, purple, and red colors. The blue-colored beads could be further sub-divided based on their gloss and brightness; in contrast, the red-colored beads were highly uniform with regard to these parameters. Based on the stripe and bubble arrangement on the surface of the glass beads, their drawing technique was identified. Traces of heat treatment or polishing were observed at the ends of the beads. According to their chemical composition, the 16 samples were classified into 3 potash glass and 13 soda glass groups; in the latter, the properties of the stabilizers were divided according to the blue and red bead colors. The stabilizers of the red beads are unique in that they allow the distinction among beads excavated in other areas in South Korea owing to their compositional differences. Colorants in blue- and red-colored beads are cobalt (containing MnO), and copper and iron, respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.86.1-86.1
• /
• 2010

Cu2ZnSnSe4는 CIS 태양전지의 In 대체 물질계로 주목을 받고 있는 저가형 태양전지 재료로 장차 차세대 태양전지 재료로 응용이 기대되고 있다. 그러나 에너지 밴드갭이 0.9~1.1eV로 다소 낮아 태양전지 광흡수층 재료로 사용하기 위해서는 wide band gab화 처리가 필요하다. 본 연구에서는 CZTSe에 S를 첨가하여 에너지 밴드갭을 확장하고자 하며, S의 첨가가 CZTSe 박막의 특성에 미치는 영향에 대하여 조사하였다. 실험의 편의성을 도모하고자 펄스레이저 법을 사용하여 증착하였다. 박막 조성 제어에는 Cu, Zn, Sn, Se, S 분말을 볼밀로 분쇄, 혼합하여 균질 혼합상 프리커서를 제조하고 이를 Cold Isostatic Press(CIP) 성형하여 Source target을 사용하였다. Pulsed YAG-Laser를 사용하여 soda lime glass상에 증착하고 조성, 구조, 조직을 관찰하고 에너지 밴드갭, 광흡수계수, 면저항, 전하밀도 등 특성을 조사하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.93.2-93.2
• /
• 2010

Recently, printing and coating technologies application fields have been expanded to the energy field such as solar cell. One of the main reasons, why many researchers have been interested in printing technology as a manufacturing method, is the reduction of manufacturing cost. In this paper, We fabricated CIGS solar cell thin film layer by doctor blade methods using synthesis of CIS precursor nanoparticles ink on molybdenum (Mo) coated soda-lime glass substrate. Synthesis CIS precursor nanoparticles ink fabrication was mixed Cu, In, Se powder and Ethylenediamine, using microwave and centrifuging. Using multi coating process as we could easily fabrication a fine flatness CIS thin-film layer ($0.7{\sim}1.35{\mu}m$), and reduce a manufacture cost and process steps. Also if we use printing and coating method and solution process in each layer of CIGS solar cell (electrode, buffer), it is possible to fabricate all printed thin-film solar cell.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.181-181
• /
• 2009

전자부품용 Pb-free sealing frit의 열팽창계수를 기판에 matching 시키기 위하여 음의 열팽창계수를 가지고 있는 $\beta$-Eucryptite, $\beta$-Spodumene를 합성하여 filler로 첨가하였다. 합성된 filler는 저온소성용 유리프리트의 높은 열팽창계수를 조절하기 용이하고, 유리프리트와 복합화 하여 소성하면 낮은 열팽창계수로 인한 우수한 열충격 저항성을 갖는다. Filler로써 $\beta$-Eucryptite, $\beta$-Spodumene의 결정성을 향상시키기 위해 $1250^{\circ}C$에서 5 시간 동안 유지하는 합성공정을 3회 반복 진행한 후 XRD를 사용하여 결정성을 분석하였고, TMA를 이용하여 filler 첨가량에 따른 유리프리트의 열팽장계수의 변화를 측정하였다. 또한, filler 입도와 함량에 따른 melting 특성을 분석하기 위해 Pill test를 진행하였으며, soda-lime glass 기판과의 접합면을 SEM을 사용하여 관찰하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.42-43
• /
• 2002

고상 소결법으로 715iO$_2$＋11$Na_2$O＋10CaO＋3Er$_2$O$_3$＋5Yb$_2$O$_3$(all wt%) 조성의 스퍼터용 유리 타겟을 제조하여, RF 마그네트론 스퍼터에 의해 희토류 원소가 첨가된 광증폭기용 다성분계 sodium calcium silicate 유리박막을 제조하였다. 최적의 공정조건을 얻기 위해 RF-power, 공정압력, 기판온도를 변화시키면서 박막을 제조하여 RF-power 150W, 공정압력 4mtorr, 기판온도 50$0^{\circ}C$, 타겟-기판 거리 6cm에서 타겟의 손상이 심하지 않으면서, 1.4$mu extrm{m}$/h의 최고 증착율을 가지는 양질의 박막을 제조하였다. (중략)