• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.386-386
• /
• 2011

탄소나노튜브는 큰 길이 대 직경 비와 뛰어난 전기적 특성으로 인해 차세대 전계 방출 소자로 주목 받고 있다. 실질적인 전계방출 디스플레이로의 응용을 위한 대면적 제작과 유리 기판 사용을 위해 이용되었던 페이스트(paste)법은 높은 전기장 하에서 장시간 전계방출시 탄소나노튜브 전계방출원과 페이스트(paste)간의 낮은 접착력 때문에 발생하는 탄소나노튜브의 탈루현상(omission)과 유기물질(organic paste)에서 발생하는 탈기체(out-gassing) 문제점이 있었다. 최근 이런 문제점을 개선하기 위해 유기물질(organic paste)를 대체하여 금속바인더(metal binder) 물질을 사용한 결과들이 보고되고 있다. 본 연구에서는 유리기판 위에 제작된 탄소나노튜브 전계방출원의 수명 향상을 위하여 금속바인더와 후속 열처리법의 변화에 따른 전계방출 안정성을 분석하였다. 금속바인더는 접합층/ 접착층(soldering layer/ adhesive layer)으로 구성되어 있으며, 일반적인 소다석회유리(soda-lime glass)에 스퍼터(DC magnetron sputtering system)를 이용하여 증착하였다. 접착층은 유리기판과 접합층의 접착력 향상을 위해 사용되며, 접합층은 기판과 탄소나노튜브 전계방출원을 접합하는 역할과 전계방출 측정시 전극이 되기 때문에 우수한 전기 전도성과 내산화성을 필요로 한다. 본 실험에서는 일반적으로 유리기판과 접착력이 좋다고 알려진 Cr, Ti, Ni, Mo을 접착층으로 사용하였으며, 접합성과 전기전도성, 내산화성이 뛰어난 귀금속 계열의 금속을 접합층으로 사용하였다. 탄소나노튜브를 1,2-디클로로에탄(1,2-dichloroethane, DCE)에 분산시킨 용액을 스프레이방법을 이용하여 증착시켰으며, 후속 열처리 방법을 통하여 접합층과 결합시켰다. 금속바인더와 후속 열처리법의 변화에 따른 접착력과 표면형상(morphology)의 변화를 주사전자현미경(scanning electron microscopy)를 이용하여 분석하였으며, 다이오드 타입에 디씨 바이어스(DC bias)를 사용하여 전계방출특성을 측정하였다[1,2].

• 분석과학
• /
• 제8권4호
• /
• pp.799-806
• /
• 1995

In industrial field, a large volume of regenerants (acid and caustic soda) and their washing effluents are regularly disposed off from the water demineralization plant during regeneration of the ion-exchanger units. Of these waste effluents, a part of the wash water discharged from the single bed Anion and Mixed Bed units can be utilized at a certain stage of their washing cycles when its conductivity is fallen down and becomes considerably less than that of the input raw water. The main aim of this specific waste effluent utilization is to dilute the TDS concentration of the input raw water (fed into the single bed ion-exchanger units) by blending. The achievement is the increase of the longevity of the production cycles of the I.E. units along with the improvement of the production quality and decrease of the regeneration frequencies. As a result, regenerant consumption would be saved because of the reduction of ionic load in feed water which will ultimately reduce the water purification cost. At the same time, the environment pollution will also be protected to a considerable extent. This operational measure is quite effective and useful specially where high TDS water is demineralized only by single bed ion-exchangers. In such case, the water treatment plant is very often found to suffer from both production quality and quantity in addition to carrying out of random and restless regenerations. Proper reuses of the aforesaid wash water effluents of the Anion and MB units excellently minimizes the difficulties experienced in practice. This paper contains the utilities and techniques of reuses of the different kinds of waste effluents of the industrial water treatment plant in addition to the specific reuses of the post-regeneration wash waters of the Anion and MB ion-exchanger units.

• 한국식생활문화학회지
• /
• 제16권5호
• /
• pp.515-524
• /
• 2001

Differences in dietary intake of Korean Americans (KA) by the length of residence in the U.S. were studied in relation to health and disease patterns in Michigan. Of 1860 questionnaires mailed, 637 (34.3%) responded with demographics, anthropometrics, self-reported disease patterns, lifestyle, and dietary patterns (93-item FFQ developed for KA). Complete responses were available for 498 people (263 men,253 women, aged 30-87 yr), who were then divided into three groups based on the number of years lived in the U.S.: 15y, 16-25y, 26y. Age-adjusted weight, height, BMI, and waist to hip ratio were within the normal ranges and did not differ among the three groups. Chronic diseases frequently reported in men and women (age-adjusted) included hypertension (14.4%, 14.1%), digestive diseases (5.4%, 8.5%), diabetes (3.6%,4.9%), and arthritis(3.3%, 12.5%), respectively. The length of residence in the U.S. was inversely associated with the age-adjusted prevalence of digestive diseases (12.4%, 6.5%, 0.4% in men, 13.0%, 11.7%, 0% in women). The length of residence was positively associated with health consciousness, receiving regular health care, taking supplements regularly, and exercising, while inversely related to smoking. The majority favored American foods for breakfast and Korean foods for dinner. Foods frequently consumed included cooked rice (w/other grains). kimchi, coffee (w/cream and sugar),bread (white and dark), citrus juice, milk (low fat and skim), lettuce and cucumber, apple, seaweed, and soda. Intake frequency of the Korean starch food group was inversely associated with the length of residence for both men and women (p<0.001), but not with the American starch food group. Fat intake did not differ by the length of residence in the U.S. The dietary changes were associated with the length of residence and chronic disease patterns for the first generation of KA, which should be further examined 'for the subsequent generation of KA.

• International Journal of Human Ecology
• /
• 제12권2호
• /
• pp.13-24
• /
• 2011

This study compared actual weight with perceived weight, described the prevalence of unhealthy weight control behavior, determined the differences in psychological and personal variables between participants that reported unhealthy weight control behavior and those who did not, and examined the relationship of eating habits to unhealthy weight control behavior for Korean adolescents. The study population consisted of a nationally representative sample of middle and high school students who completed the Fifth Korea Youth Risk Behavior Web-based Survey (KYRBWS): Fifth in 2009. Among the 75,066 participants of KYRBWS, 35,473 (n = 18,851 girls and 16,622 boys) were eligible for a research focused on unhealthy weight control behavior. The results of this research were as follows: First, there were considerable discrepancies (45.1% of girls and 32.8% of boys) between the perceived weight and the actual weight. Second, overall, unhealthy weight control behavior was more prevalent in girls and fasting was the most commonly reported behavior. Third, participants that reported unhealthy weight control behavior scored significantly lower on scaled measures of happiness, health, academic achievement, and economic status; in addition, they scored higher on stress measures. Fourth, girls and boys shared common protective factors of having breakfast and vegetables more often, perceiving their weight as underweight rather than overweight, and having a correct weight conception. Protective factors unique to girls were having lunch and dinner more often. Girls and boys shared common risk factors of the consumption of soda, fast food, instant noodles, and snacks more often, while consumption of fruit more often was a risk factor only for girls. The improvement of protective factors and minimization of risk factors through Home Economics classes (and other classes relevant to health) may mitigate unhealthy weight control behavior of adolescents.

• Korean Chemical Engineering Research
• /
• 제46권6호
• /
• pp.1052-1056
• /
• 2008

소다 공정에서 탄산칼슘 결정의 평균입경과 형상 변화를 온도변화와 PAA 용액의 첨가에 대하여 연구하였다. 낮은온도($30^{\circ}C$, $60^{\circ}C$)에서는 Calcite 결정을, 높은 온도($80^{\circ}C$)에서는 Aragonite 결정을 얻었다. $30^{\circ}C$와 $80^{\circ}C$에서 용액에 PAA 용액을 첨가하여도 결정의 형상변화는 없었다. 중간온도($60^{\circ}C$)에서 PAA 용액을 첨가하여 Aragonite 결정을 얻었다. 결정의 형상변화가 PAA 분자 첨가로 인하여 일어났다. PAA 용액의 농도가 높을수록, 더 많은 Aragonite 결정을 얻었다. PAA 수용액의 농도가 높고 분자량이 클수록 탄산칼슘 결정의 평균입경은 증대하였으며, 형상변화가 일어나는 영역에서는 PAA의 분자량이 평균입경변화에 중요한 변수가 된다.

• Transactions on Electrical and Electronic Materials
• /
• 제11권2호
• /
• pp.73-76
• /
• 2010

The copper indium disulfide ($CuInS_2$) thin film was manufactured using sputtering and thermal evaporation methods, and the annealing with sulfurization process was used in the vacuum chamber to the substrate temperature on the glass substrate, the annealing temperature and the composition ratio, and the characteristics thereof were investigated. The $CuInS_2$ thin film was manufactured by the sulfurization of a soda lime glass (SLG) Cu/In/S stacked [1] elemental layer deposited on a glass substrate by vacuum chamber annealing [2] with sulfurization for various times at a temperature of substrate temperature of $200^{\circ}C$. The structure and electrical properties of the film was measured in order to determine the optimum conditions for the growth of $CuInS_2$ ternary compound semiconductor $CuInS_2$ thin films with a non-stoichiometric composition. The physical properties of the thin film were investigated under various fabrication conditions [3,4], including the substrate temperature, annealing temperature and annealing time by X-ray diffraction (XRD), field Emission scanning electron microscope (FE-SEM), and Hall measurement systems. [5] The sputtering rate depending upon the DC/RF power was controlled so that the composition ratio of Cu versus In might be around 1:1, and the substrate temperature affecting the quality of the film was varied in the range of room temperature (RT) to $300^{\circ}C$ at intervals of $100^{\circ}C$, and the annealing temperature of the thin film was varied RT to $550^{\circ}C$ in intervals of $100^{\circ}C$.

• 한국세라믹학회지
• /
• 제42권12호
• /
• pp.842-845
• /
• 2005

Glass composites containing ceramic fiber have been developed for Solid Oxide Fuel Cell (SOFC) seals. Effect of glass type, loading pressure and thermal cycle the leak rates of composite seals was investigated. Seal performance of two commercial glasses was compared with that of $SiO_2BaO-B_2O_3$ glass synthesized in this work. The leak rate for seals made of pyrex(R) increases from $\~0.0005\;to\;\~0.004sccm/cm$ as the gas pressure increases from 10 to 50 kPa. The soda lime silicate glass seal shows the leak rate two times higher than the one made of pyrex(R) or $SiO_2BaO-B_2O_3$ glass. The viscosity of glass at the seal test temperature is presumed to affect the leak rate of the glass seal. As the applied loading pressure increases from 0.4 to 0.8 MPa at $750^{\circ}C$, the leak rate decreases from 0.038 to 0.024 sccm/cm for composite seals. It has been found that during 50 thermal cycles between $450^{\circ}C\;to\;700^{\circ}C$ leak rates remained almost constant, ranging from 0.025 to 0.03sccm/cm. The results showed an excellent thermal cycle stability as well as sealability of the glass matrix ceramic fiber composite seals.

• 한국재료학회지
• /
• 제20권8호
• /
• pp.412-417
• /
• 2010

Mo thin films were used for the back electrode because of the low resistivity in the Mo/$CuInGaSe_2$ contact in chalcopyrite solar cells. $1\;{\mu}m$ thick Mo thin films were deposited on soda lime glass by varying the Ar pressure with the dc-magnetron sputtering process. The effects of the Ar pressure on the morphology of the Mo back electrode were studied and the relationships between the morphology and electro-optical properties, namely, the resistivity as well as the reflectance of the Mo thin films, were investigated. The resitivity increased from $24\;{\mu}{\Omega}{\cdot}cm$ to $11833\;{\mu}{\Omega}{\cdot}cm$; this was caused by the increased surface defect and low crystallinity as the Ar pressure increased from $3{\times}10^{-3}$ to $3{\times}10^{-2}\;Torr$. The surface morphologies of the Mo thin films changed from somewhat coarse fibrous structures to irregular and fine celled structures with increased surface cracks along the cell boundaries, as the Ar pressure increased from $3{\times}10^{-3}$ to $3{\times}10^{-2}\;Torr$. The changes of reflectances in the visible light range with Ar pressures were mainly attributed to the surface morphological changes of the Mo thin films. The reflectance in the visible light range showed the highest value of 45% at $3{\times}10^{-3}\;Torr$ and decreased to 18.5% at $3{\times}10^{-2}\;Torr$.

• 한국재료학회지
• /
• 제23권1호
• /
• pp.7-12
• /
• 2013

The $Cu_2ZnSnS_4$ (CZTS) thin film solar cell is a candidate next generation thin film solar cell. For the application of an absorption layer in solar cells, CZTS thin films were deposited by pulsed laser deposition (PLD) at substrate temperature of $300^{\circ}C$ without post annealing process. Deposition time was carefully adjusted as the main experimental variable. Regardless of deposition time, single phase CZTS thin films are obtained with no existence of secondary phases. Irregularly-shaped grains are densely formed on the surface of CZTS thin films. With increasing deposition time, the grain size increases and the thickness of the CZTS thin films increases from 0.16 to $1{\mu}m$. The variation of the surface morphology and thickness of the CZTS thin films depends on the deposition time. The stoichiometry of all CZTS thin films shows a Cu-rich and S-poor state. Sn content gradually increases as deposition time increases. Secondary ion mass spectrometry was carried out to evaluate the elemental depth distribution in CZTS thin films. The optimal deposition time to grow CZTS thin films is 150 min. In this study, we show the effect of deposition time on the structural properties of CZTS thin film deposited on soda lime glass (SLG) substrate using PLD. We present a comprehensive evaluation of CZTS thin films.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.434-436
• /
• 2013

Ga-doped ZnO (GZO) was substitutes of the SnO2:F films on soda lime glass substrate in the photovoltaic devices such as CIGS, CdTe and DSSC due to good properties and low cost. However, it was reported that the electrical resistivity of GZO is unstable above $300^{\circ}C$ in air atmosphere. To improve thermal stability of GZO thin films at high temperature above $300^{\circ}C$ an $TiO_2$ thin film was deposited on the top of GZO thin films as a barrier layer by Pulsed Laser Deposition (PLD) method. $TiO_2$ thin films were deposited at various thicknesses from 25 nm to 100 nm. Subsequently, these films were annealed at temperature of $300^{\circ}C$, $400^{\circ}C$, $500^{\circ}C$ in air atmosphere for 20 min. The XRD measurement results showed all the films had a preferentially oriented ( 0 0 2 ) peak, and the intensity of ( 0 0 2 ) peak nearly did not change both GZO (300 nm) single layer and $TiO_2$ (50 nm)/GZO (300 nm) double layer. The resistivity of GZO (300 nm) single layer increased from $7.6{\times}10^{-4}{\Omega}m$ (RT) to $7.7{\times}10^{-2}{\Omega}m$ ($500^{\circ}C$). However, in the case of the $TiO_2$ (50 nm)/GZO (300 nm) double layer, resistivity showed small change from $7.9{\times}10^{-4}{\Omega}m$ (RT) to $5.2{\times}10^{-3}{\Omega}m$ ($500^{\circ}C$). Meanwhile, the average transmittance of all the films exceeded 80% in the visible spectrum, which suggests that these films will be suitable for photovoltaic devices.