• Korean Journal of Organic Agriculture
• /
• v.6 no.1
• /
• pp.63-75
• /
• 1997

This study aims to find out the devices to minimize the amount of nitrate ingested from kimchi, the main way of vegetable intake for Koreans, and the basic data to deliver to calculate the total daily intake for Korean, investigating the year-round changes of nitrate content in vegetables for Kimche raw material, and changes of nitrate content by salting of chinese cabbage, and stewed kimchi through the use of different cooking methods. The results obtained were summarized as follow: over between 205-6655mg/kg f.w. in chinese cabbage, 480-3970mg/kg f.w. in chinese radish, 157-5820mg/kg f.w. in lettuce and 29-520mg/kg f.w. in cucumber respectively. Therefore it was strongly adviced to introduce the nitrate limit value of vegetables in Korea if the nitrate content in Kimchi should be reduced to meet the nitrate ADI(Acceptable Daily Intake, 219mg60kg b.w) of FAO.WHO, because the nitrate content in Kimchi reflects the nitrate content in vegetables. In order to keep the low nitrate content in Kimchi. it was adviced to remove the outer leaf which contains 2-3 times higher nitrate content compare to the inner leaf at the time of preparation, i.e. chinese cabbage, before the soaking treatment in salt solution for Kimchi making process. The dehydration by soaking treatment in salt solution occurred at 0.9%~4.7% in leaf midrib and more than 13%~24% in leaf blade. The nitrate content after soaking in salt solution was increased 107%~123% compared with before soaking, increasing rates of nitrate content in the outer and inner leaf midrib were higher than those in leaf blade. The increase of nitrate content in salt solution after soaking due to the dehydration of chinese cabbage by soaking treatment. The Kimchi stew(Kimchi JJige) was processed with and without animal oil, but the amount of nitrate in kimchi stew did not decrease both treatments, but it increased after the processing since the water in Kimchi stew has got low by boiling.

• Korean Journal of Plant Resources
• /
• v.26 no.5
• /
• pp.636-644
• /
• 2013

We examined the effects of soaking, saturation, and aging conditions of raw cowpea seeds, on the yield and growth responses of cowpea sprouts. The absorption caused rapid growth for the first two hours of soaking, then the growth slowed. The longer the soaking period (varied from 1 to 6 hours), the lower the germinability, yield ratio, and lateral root output became. A five-day saturation (moist $96{\pm}1%$, $20^{\circ}C$) treatment led to higher germinability, yield ratio, and lateral root output than no treatment and one- or three-day saturation treatment. High-temperature aging treatment led to lower germinability and yield ratio compared to no such treatment. Taking these findings into account, the optimal treatment conditions of raw cowpea seeds are a five-day saturation (moist $96{\pm}1%$, $20^{\circ}C$) treatment followed by cleaning and growing.

• Macromolecular Research
• /
• v.16 no.5
• /
• pp.411-417
• /
• 2008

The surfaces of henequen fibers, which can be obtained from the leaves of agave plants, were treated with two different media, tap water and sodium hydroxide, that underwent both soaking and ultrasonic methods for the fiber surface treatment. Various biocomposites were fabricated with untreated and treated, chopped henequen fibers and polypropylene using a compression molding method. The result is discussed in terms of interfacial shear strength, flexural properties, dynamic mechanical properties, and fracture surface observations of the biocomposites. The soaking (static method) and ultrasonic (dynamic method) treatments with tap water and sodium hydroxide at different concentrations and treatment times significantly influenced the interfacial, flexural and dynamic mechanical properties of henequen/polypropylene biocomposites. The alkali treatment was more effective than the water treatment in improving the interfacial and mechanical properties of randomly oriented, chopped henequen/PP bio-composites. In addition, the application of the ultrasonic method to each treatment was relatively more effective in increasing the properties than the soaking method, depending on the treatment medium and condition. The greatest improvement in the properties studied was achieved by ultrasonic alkalization of natural fibers, which was in agreement with the other results of interfacial shear strength, flexural strength and modulus, storage modulus, and fracture surfaces.

• Journal of Bio-Environment Control
• /
• v.19 no.1
• /
• pp.55-62
• /
• 2010

This study was conducted to find out the effect of diniconazole treatment by seed soaking on the stretching of tomato and cucumber seedlings. The emergence rate of tomato and cucumber seed was decreased as diniconazole concentration was higher and soaking period was longer. The emergence rate of tomato seedlings was lower as the soaking period was longer in $1mg{\cdot}L^{-1}$ concentration treatments, although there was no significant difference. The other concentration treatment (10, 50, and $100mg{\cdot}L^{-1}$) reduced emergence rate of tomato seedlings outstandingly in higher concentration and longer treated period, but 90% of treated seeds emerged at 10 days after sowing. As the concentration of diniconazol was higher and soaking period was longer, plant height and growth rate of seedlings were retarded. There covery of internodes growth was faster in lower concentration and shorter soaking period. The top and root fresh weight and dry weight of tomato and cucumber seedlings was not influenced by $1mg{\cdot}L^{-1}$ concentration, but these growth characteristics were reduced in higher concentration and longer soaking period. The dwarfed cucumber seedlings treated by diniconazol showed normal growth rate after planting and their male and female flower was set normally. These results suggest that the proper concentration and soaking period of diniconazol may be $10mg{\cdot}L^{-1}$ concentration for 12 hours in tomato seed, and $1mg{\cdot}L^{-1}$ concentration for 24 hours in cucumber seed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.3
• /
• pp.320-326
• /
• 2009

The crops showing hard seed character have high seed viability after seed storage for long period. The low germination rate due to hard seed coat, however, cause a problem of low seedling establishment in field condition. Three legumes used in the experiment, lablab bean (Dolichos lablab L.), asparagus bean (Vigna sesquipedalis L. Fruwirth), and soybean (Glycine max L. Merr.), showed low germination rate (26, 17, and 5%, respectively) due to thick and hard seed coat. In this study artificial treatment for breaking dormancy was tested in hard seeds. The effect of proper treatment was various depending on species. The germination rate of lablab bean was highly improved up to 94% by soaking into water for 24 hours. In the case of asparagus bean, the rate was increased up to 90% by soaking for eight hours near boiling water until it cools. The germination rate of small hard seed soybean was increase to 96% by soaking into concentrated sulfuric acid for 10 minutes. Ultrastructural change revealed by scanning electron microscope (SEM) reflects that the structure of micropyle was changed and water uptake was facilitated with all treatments tested in the experiment. Especially, sulfuric acid treatment resulted in the degradation of micropylar tissue. These results demonstrate that the artificial treatment including sulfuric acid and (hot) water soaking treatment for promoting water uptake can be applied to improve seed germination in legume seed with thick and hard seed coat.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.1
• /
• pp.61-66
• /
• 2009

Effects of aqueous ammonia soaking treatments to yellow poplar (Liriodendron tulipifera L.) were investigated to focus on chemical compositional changes and enzymatic hydrolysis characteristics changes by this treatment. Treatment temperature and time were main variables. At 3 different levels of aqueous ammonia soaking temperature and time ($145^{\circ}C$ -1 h, $90^{\circ}C$ -16 h and $45^{\circ}C$ - 6 days), lower temperature and longer soaking time led to more xylan removal based on carbohydrate compositional analysis. However, at higher temperature treatment led to more enzymatic saccharification of cellulose to glucose by commercial cellulose mixtures (Celluclast 1.5L and Novozym 342 from Novozyme, Denmark). Cellulose hydrolysis was gradually increased with increasing enzymatic hydrolysis time but xylan hydrolysis was leveled out at early stage (less than 10 h) of enzymatic hydrolysis.

• Korean Journal of Plant Resources
• /
• v.22 no.2
• /
• pp.111-115
• /
• 2009

The seeds of Phellodendron amurense have difficulty to obtain because these plants show dioecism with independent distributions. This experiment was conducted to find the effects of soaking and prechilling treatment on the germination of P. amurense seeds. Seeds were soaked for 3, 5 and 10 days (soaking treatment), and placed on petri-dish at $4^{\circ}C$ for 10, 20, 30 and 50 days after soaked at room temperature for 24 hours (prechilling treatment). After the treatments, germination percentage, mean germination time, germination speed and germination performance index were analyzed. As a result of sowing, prechilled seeds for 30 days had the highest percent of germination, whereas all of the soaked seeds showed lower percent of germination than non-treatment (control). In case of mean germination time, only prechilling for 30 days was more effective than control. In germination speed, all of the soaked seeds had lower values than control whereas all prechilled seeds except prechilled seeds for 20 days showed higher values than control. Especially prechilled seeds for 30 days showed the highest rate among the prechilling treatments. Germination performance index was similar to germination speed.

• Journal of Bio-Environment Control
• /
• v.1 no.2
• /
• pp.169-174
• /
• 1992

This experiment was carried out to investigate the possibility of practical use of intermittent soaking system(ISS) in hydroponicaly growing tomato. There were four treatments which were NFT, Aeroponics, and ISS with 10 and 15 minute soaking intervals. 1. Plant height is highest in NFT, but main root length is longest in ISS. While stem diameter and leaf number were not significantly difference. 2. Fresh and dry weight were heavier in NFT than those of other systems at early growth stage, but the heavier in ISS system, the growth more develop. 3. In 43 days after treatment, the number of flowerlet was largest in aeroponics, and then ISS and NFT in order. Fruit weight per plant was also heaviest in aeroponics. 4. Average yield per plant were 1929.1g in aeroponics, 1475.2g in ISS with 10 minute soaking interval, 1276.2g in NFT and 1084.8g in ISS with 15 minute soaking interval. 5. Average fruit number per plant were 11.0 in aeroponics, 9.7 in NFT, 8.3 in ISS with 15 minute soaking interval, and 7.7 in ISS with 10 minute soaking interval. Average fruit weight were 192.9g in aeroponics, 172.4g in ISS with 10 minute soaking interval, 134.0g in NFT and 126.0g in ISS with 15 minute soaking interval. 6. Average fruit length was longer in aeroponics and ISS with 10 minute soaking interval than in the NFT and ISS with 15 minute soaking interval. Average fruit width was similarly wider in NFT, aeroponics and ISS with 10 minute soaking interval than in ISS with 15 minute soaking interval.

• Journal of Ginseng Research
• /
• v.9 no.1
• /
• pp.42-53
• /
• 1985

This study was carried out to obtain the basic information about the large scale propagation of ginseng (Panax ginseng C.A. Meyer). Therefore, the stem cuttings of 1-year old ginseng, treated with various concentrations of plant growth regulators for 5 seconds (quick dipping) and 24 hours (prolonged soaking), were cultured. The root formation of stem cuttings was varied with the concentrations, kinds, and treatment methods of plant growth regulators. Besides normal-looking roots various malformed roots were observed. In the prolonged soaking method, the culture of stem cuttings, treated with 10 ppm of IBA or NAA, resulted in profuse root regeneration. And stem cuttings, in quick dipping method, treated with 2000 ppm of IBA or NAA resulted in more excellent root regeneration. In general, IBA was more vigorous for the root formation than NAA, The treatment with 50 ppm kinetin or 100 ppm BA brought good result for the retardation of senescence of stem cuttings and BA treatment was more effective than kinetin. As for the saponin content of roots derived from stem cutting culture, the roots, formed by non-treatment of growth regulators, were higher in saponin content than those formed by treatment of growth regulators.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.6
• /
• pp.392-403
• /
• 2022

Currently, composite board manufacturing using natural fibers has the potential to expand owing to environmental awareness. To produce a composite board, treatment is required to improve the mechanical and physical properties of the natural fibers. In this study, sodium chloride (NaCl) was used for the chemical treatment. However, studies on chemical treatments using NaCl are limited. This study aimed to investigate the characteristics of kenaf fibers after NaCl treatment. The NaCl treatment concentrations were 1, 3, and 5 wt.% at room temperature, with soaking durations of 1, 2, and 3 h. The tensile strength, strain, and Young's modulus were measured to evaluate the mechanical properties of the fibers. The fiber bundle diameter, weight change owing to treatment, and contact angle were determined to analyze the effect of NaCl treatment. The kenaf fiber bundle treated with 5 wt.% NaCl for 3 h exhibited the highest tensile strength, Young's modulus, reduction in fiber bundle diameter, weight change, and decrease in contact angle compared to those of untreated fiber bundles. The tensile properties of the fiber bundle exhibited a tendency to decrease with increasing fiber bundle diameter. Increasing the soaking duration from 1 to 2 h did not result in a significant decrease in the fiber bundle diameter or an increase in tensile strength. However, a further increase in the soaking duration from 2 to 3 h resulted in a considerable decrease in the fiber bundle diameter and an increase in the tensile strength.