• 제목/요약/키워드: soaking time

검색결과 465건 처리시간 0.023초

가스하이드레이트 배가스 치환 시 주입유속의 영향에 관한 실험적 연구 (Experimental Study on Injection Rate Effects during Gas Hydrate Production using Flue Gas Swapping Method)

  • 이동건;이주용;이민희;이재형
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2008년도 추계학술대회 논문집
    • /
    • pp.196-199
    • /
    • 2008
  • In this study, gas hydrate production has been followed using swapping method to investigate the effect of injection rate of flue gas and soaking period in unconsolidated artificial sand sample. The results shows that recovery factor of methane gas decreases with increasing the injection rate of flue gas. This indicates that the velocity of flue gas in porous media may act as kinds of inhibitor for production of hydrate. Also recovery factor increases with increasing the soaking time.

  • PDF

습식화학법으로 제조된 티탄산 납의 형상 (Morphology of Lead Titanate Prepared by Wet Chemical Methods)

  • 최병철;이문호
    • 한국결정학회지
    • /
    • 제3권1호
    • /
    • pp.1-8
    • /
    • 1992
  • 졸겔 및 공침법으로 제조된 티탄산 납 분말의 형태를 하소온도와 하소시간의 함수로 조사하였다. 질산 납과 사염화 티탄의 혼합용액을 사용하여 40-43℃ 및 9.0-9.7 pH에서 PbTiO3 전구체를 제조하였으며, 350-1000℃에서 1-10시간동안 공기중에서 이들을 히소시켰다. 하소온도와 시간의 증가에 따라 입자의 크기가 증가하고 응집이 심화되었다. 졸겔법으로 제조된 분말을 700℃에서 히소시킬 때, 초기에 형성된 침상형 혹은 각주 형의 입자들은 하소가 진행됨에 따라 다면체형으로 변한뒤, 모서리가 둥근 다면체형 입자로 성장하였다. 공침법으로 제조된 분말은 결정화 과정중에 형태가 변화되지 않았다.

  • PDF

이불솜의 종류에 대한 유기실리콘 제4급 암모늄염의 항미생물성 효과 -목화솜, 폴리에스테르솜, 양모솜- (A Study on The Antimicrobial Effect of Organic Silicon Quaternary Ammonium Salt Using Cotton, Polyester, and Wool)

  • 이은영
    • 대한가정학회지
    • /
    • 제33권3호
    • /
    • pp.243-253
    • /
    • 1995
  • This study has been carried out for the antimicrobial effects of organic silicon quaternary ammonium salt with which cotton, polyester, and wool were treated respectively, using Esherichia coli and Proteus bulgaris which are experimental bacteria for clothing materials. As a results, the best antimicrobial effects of organic silicon quaternary ammonium salt came out from cotton ; the next form wool ; and lower from polyester. With the changes of the temperature, the antimicrobial effect with soaking time, there was no changes with cotton after 10 minutes passed. It seemed to have reacted entirely in the early stage. The longer the soaking duration was, the higher the effect from polyester was. The effect from wool was increased until 20 minutes, but decreased after 30 minutes. The optimal processing condition of cotton was in the condition of liquor ratio 40:1, concentration 0.5%, soaking time 5 minutes, and temperature 3$0^{\circ}C$ ; wool was 1.5%, 20 minutes, and 6$0^{\circ}C$ ; polyester was 2.0%, 30 minutes, and 3$0^{\circ}C$ respectively. The changes of the effect by washing was as followings : The processing effect on cotton and wool appeared to be everlasting, since they had no changes by washing 10 times ; while, it was remarkablely decreased with polyester by washing only once, and was almost disappeared after washing 10 times, which means that polyester has no durability to washing.

  • PDF

16mol% CaO-84mol% $ZrO_2$ 고용체의 소결특성에 관한 연구 (A Study on Sintering Behavior of 16 mol% CaO-84mol% $ZrO_2$ Solid Solution)

  • 박금철;최영섭
    • 한국세라믹학회지
    • /
    • 제20권4호
    • /
    • pp.347-355
    • /
    • 1983
  • A batch mixture was prepared as 16mol% CaO-84mol% $ZrO_2$ of regeant-grade powder. The monoclinic Zirconia powder had an average particle size of $9.24 \mu\textrm{m}$ and calcium carbonate powder had a reported purity of 99.7 weight percent and mean particle size of TEX>$24, 37<\mu\textrm{m}$. The specimens were fired at 1400, 1500, 1650 and $1750^{\circ}C$ for 0. 3, 5 and 7 hours respectively. After fired the specimens were investigated using Scaning electron microscopy. Density Porosity Compressive strength Modulus of rupture and Thermal expansion were measured X-ray diffration analysis was also carried out. The results are as follows ; 1) As the firing temperature or soaking time was increased firing linear shrinkage apparent density compressive strength and modulus of rupture increased but apparent porosity decreased, 2) Cubic and monoclinic Zirconia was found at $1400^{\circ}C$ and cubic Ziconia found above $1500^{\circ}C$ 3) The specimens fired at 140$0^{\circ}C$ without soaking display thermal expansion curves by monoclinic〓tetragonal transformation and no tranformation was found at $1400^{\circ}C$ for 5hrs and above $1500^{\circ}C$. 4) The lattice parameter had constant value of 5.1345 $\AA$ through all the ranges of firing temperature 5) The higher the firing temperature was or the longer the soaking time was the larger the grain size was.

  • PDF

GA3 처리가 유색칼라 괴경의 개화에 미치는 영향 (Effect of GA3 Treatment on the Flowering in Tuber of Zantedeschia 'Black Magic')

  • 박노복;임회춘
    • 현장농수산연구지
    • /
    • 제7권1호
    • /
    • pp.90-96
    • /
    • 2005
  • GA3 침지시간과 농도에 따른 출현소요일수는 GA3 처리가 무처리에 비하여 1.1~4.0일 단축되었으며 생육특성도 GA3 처리가 양호한 경향이었으나 GA3 침지 시간과 농도에 따른 차이는 적었다. 개화소요일수는 GA3 처리가 무처리보다, 30분 침지가 10초 침지보다, 그리고 농도가 높을수록 단축되었으나 화경장, 화경폭, 화고 및 화폭 등은 처리간 차이가 없었다. 또한 개화수는 GA3 농도에 따른 효과가 커서 250~500 mg·L-1 처리가 4.0~4.3개로 최고 2배 많았으나 GA3 침지 시간에 따른 개화수 차이는 크지 않았다. 정상화율과 구근비대상황은 침지시간 및 농도에 관계없이 비슷하였다. 이로써 GA3 처리는 개화수 증가를 위해 반드시 필요하며 침지시간에 상관없이 처리농도는 250~500mg·L-1가 적당할 것으로 판단된다.

Threonine과 Sucrose 용액에 침지 및 볶음에 의한 도라지차의 색상 발현 모니터링 (Monitoring for the Color Formation of a Doraji Tea by Soaking of Threonine and Sucrose Solution and Roasting)

  • 이기동;정용진;박난영;권중호
    • 한국식품과학회지
    • /
    • 제31권4호
    • /
    • pp.938-944
    • /
    • 1999
  • 도라지의 색상발현을 위하여 반응표면분석법으로 도라지의 threonine 침지농도 및 볶음조건에 따른 도라지차의 기계적 색도 및 관능적 색상 변화를 모니터링 하였다. 기계적 색도와 관능적 색상에 대한 회귀식의 $R^{2}$는 모두 0.87 이상으로 5% 수준에서 유의성이 인정되었다. 백색도가 가장 높은 침지 및 볶음조건은 threonine 농도 0.09%에서 침지한 후 건조하여 $142.37^{\circ}C$에서 21.94분 볶음처리하는 것으로 나타났다. 적색도가 가장 높은 침지 및 볶음조건은 threonine 농도 1.24%에서 침지한 후 건조하여 $154.01^{\circ}C$에서 28.59분 볶음처리하는 것으로 나타났고, 가장 낮은 침지 및 볶음조건은 threonine농도 1.67%에서 침지한 후 건조하여 $137.61^{\circ}C$에서 24.62분 볶음처리하는 것으로 나타났다. 황색도가 가장 높은 침지 및 볶음조건은 threonine 농도 1.10%에서 침지한 후 건조하여 $154.72^{\circ}C$에서 27.12분 볶음처리하는 것으로 나타났다. 관능적 특성으로서 도라지차의 색상에 대한 관능평점은 threonine 농도 1.25%, 볶음온도 $141.81^{\circ}C$및 볶음시간 34.14분에서 가장 높았다.

  • PDF

요소수지접착제(尿素樹脂接着劑)를 사용(使用)한 곰솔 집성재(集成材)의 제조조건(製造條件)이 접착성질(接着性質)에 미치는 영향(影響) (Influence of Adhesion Condition on the Laminated Wood of Pinus thunbergii glued with Urea-formaldhyde Resin)

  • 정인오;소원택;임기표
    • Journal of the Korean Wood Science and Technology
    • /
    • 제12권2호
    • /
    • pp.35-43
    • /
    • 1984
  • This study was carried out to investigate the block shear strength of the 2ply laminated wood composed of Pinus thunbergii with ureaformaldehyde resin as adhesives according to pressure (6, 9, 12, 15kg/$cm^2$), pressing time(5, 10, 20, 30 hrs.), amount of spread(54, 108, 217, 324g/$cm^2$), hardener(10, 20, 30, 40% of 10% $NH_4CL$ on resin) and extender(0, 5, 10, 15% wheat flour on resin), and the bending strength and bending young's modulus of laminated beam according to the number of ply. The results were summarized as follows; 1. According to pressing pressure with amount of spread 217g/$cm^2$ both dry and wet shear strength of laminated wood showed the highest in 15kg/$cm^2$, and hot-cold soaking treatment showed the highest in 9kg/$cm^2$, while all shear strength of dry, wet and hot-cold soaked laminated wood have been reduced with the increasing of pressing time. 2. According to amount of spread, adhesion strength with the dry, wet and hot-cold soaking treatments revealed the highest in 217g/$cm^2$ and have been reduced under or over 217g/$cm^2$ of spread. 3. According to addition of hardener and extender, all shear strength of laminated block with the dry, wet and hot-cold soaking treatments have been reduced in increasing of addition amount of hardener and extender. The bending strength of beam according to the number of ply showed the highest in 2ply laminated wood and horizontal loading beam to glue line had the higher in strength than the vertical loading.

  • PDF

옥수수 줄기의 암모니아수 침지 전처리에 의한 효소 당화 향상 (Enhancing Enzymatic Saccharification of Corn Stover by Aqueous Ammonia Soaking Pretreatment)

  • 신수정;유주현;조남석;한심희;김문성;박종문
    • Journal of the Korean Wood Science and Technology
    • /
    • 제37권4호
    • /
    • pp.381-387
    • /
    • 2009
  • 본 연구는 암모니아수 침지 처리가 옥수수대의 화학 조성과 효소당화 특성에 미치는 영향에 대하여 연구한 것이다. 암모니아수 침지에서 처리 온도와 시간이 본 연구에서 주요 변수였다. 무 처리 분말과 침지 처리 분말의 전체 조성 분석과 탄수화물 조성 분석 결과, 3가지 다른 수준의 암모니아수 침지 조건($140^{\circ}C$ - 1 h, $90^{\circ}C$ - 16h 및 $50^{\circ}C$ - 6일)에서 고온 단기간 처리가 더 많은 양의 자이란과 리그닌을 용출시켰다. 암모니아 침지에 의한 자일란과 리그닌 용출 제거 효과가 고온 침지 처리 된 옥수수 줄기 분말에서 상업용 셀룰라아제를 사용하는 셀룰로오스와 자이란의 효소 당화를 촉진시켰다.

침수 및 예냉처리가 황벽나무의 종자 발아에 미치는 영향 (Effect of Soaking and Prechilling Treatment on Seed Germination of Phellodendron amurense Rupr.)

  • 최충호;서병수
    • 한국자원식물학회지
    • /
    • 제22권2호
    • /
    • pp.111-115
    • /
    • 2009
  • 본 연구는 주로 독립수로 분포하여 생육하고 있는 황벽나무의 종자를 다량으로 보급하기 위한 효과적인 실생 번식법으로서 침수 및 예냉 처리를 통해 발아율을 향상시키고자 실시되었다. 침수처리는 실온에서 각각 3, 5, 10일 동안 실시되었고, 예냉 처리는 실온에서 24시간 흡습시킨 후 $4^{\circ}C$ 저장고에 각각 10, 20, 30, 50일간 보관하여 실시하였다. 파종실험 결과, 황벽나무 종자는 예냉 30일 처리에서 발아율 향상에 효과적이었으며, 침수처리는 오히려 발아율을 저해하는 요인으로 작용하였다. 평균 발아일수의 경우 예냉 30일 처리만이 발아일수 단축에 효과적이었다. 발아속도에 있어서는 침수 처리의 경우 모두 무처리구 보다 낮게 나타난 반면 예냉 처리는 20일 처리를 제외하고는 모두 무처리구 보다 높게 나타났다. 특히 예냉 30일 처리에서는 현저히 높을 수치를 나타내었다. 발아균일지수 역시 발아속도와 유사한 경향을 보였는데, 침수처리는 모두 낮게 나타났으며, 예냉 30일 처리에서 가장 높은 수치를 보였다.

백일홍의 생장 및 개화에 미치는 식물생장억제제의 침종 및 경엽살포의 영향 (Effect of Seed Soaking and Foliar Spray of Plant Growth Retardants on Growth and Flowering in Zinnia elegans)

  • 이승우;안성은;김영채
    • 원예과학기술지
    • /
    • 제19권4호
    • /
    • pp.574-578
    • /
    • 2001
  • 본 실험은 왜화제 daminozide, chlormequat, uniconazole의 침종처리(8시간, 24시간)와 경엽살포가 백일홍의 생육에 미치는 영향을 조사하기 위하여 수행하였다. 침종처리의 경우 'Dream Land Rose'의 초장의 변화는 침종시간에 따른 차이가 없이 처리농도가 높을수록 왜화효과가 크게 나타났고, 특히 uniconazole $125mg{\cdot}L^{-1}$에서 큰 왜화효과를 보였다. 개화소요일수는 모든 약제처리에서 단축되었다. 'Dream Land Scarlet'의 초장은 8시간 침종에 비하여 24시간 침종에서 왜화효과가 컸으며 uniconazole이 가장 효과적이었다. 개화소요일수도 약제처리에 의하여 감소하는 경향을 보였다. 한편, 경엽살포처리에서는 'Dream Land Rose'와 'Dream Land Scar1et'모두 초장이 uniconazole 고농도에서 현저한 감소를 보였다. 개화소요일수는 chlormequat과 uniconazole 처리에서 단축되었다. Daminozide는 설상화수를 크게 감소시켰다.

  • PDF