• 한국응용과학기술학회지
• /
• 제25권2호
• /
• pp.211-218
• /
• 2008

The performance of positive plates depends on the structure of the lead dioxide active mass. The positive active materials (PAM) consists of a skeleton, built up of agglomerates and macropores. Agglomerates, in their turn, comprise particles and micropores. This paper described a study conducted to determine the effects of different soaking times between the acid fill and formation stages of the tubular plate production. For the positive plates a lead oxide were filled into tubular bag with a red lead. After filling the positive plates were soaked in $H_2SO_4$ solution. X-ray diffraction(XRD), scanning electron microscopy(SEM) and electrical testing had been used to study the compositional and morphological aspects of the positive active material(PAM) just prior and after formation. Results indicate that PAM compositions were effected by the soaking time and acid density of $H_2SO_4$ solution. It can be seen that as the soaking time duration increases, $\alpha$-PbO, $Pb_3O_4$, and Pb were all gradually sulphating. Composition of 3BS reached a maximum at around 3 h duration and $H_2SO_4$ of sp. gr. 1.10 on soaking. This results would suggest that the most beneficial conditions for soaking were the $H_2SO_4$ of sp. gr. 1.10 and 2 to 6 h of soaking.

• 대한가정학회지
• /
• 제19권3호
• /
• pp.63-68
• /
• 1981

This study was to determine optimal conditions for preparing Gangjung and Sanja. Texturometer and panel test were employed to evaluated products which were prepared under varying soaking time of glutinous rice. The results are found as follows; Examination of acceptibilities of products by the panel test showed that 48 hours of soaking was the most optimal. In acceptability ratings. the second went to 2 hours, the third 24 hours, the forth 120 hours, the fifth, 72 hours, and the sixth, 96 hours. However, there was no significant difference in acceptability among various products(P>0.05). The cohesiveness and the brittleness of the highest-grade products soaking in 48 hours showed 0.09$cm^{2}$, 1.25cm, respectively by texturometer. In therms of acceptability, the cohesiveness of high-grade products read between 0.06~0.7$cm^{2}$. The brittleness of products examined was in the range of between 0.36 and 1.41cm. No significant difference was found among products prepared under varying soaking time n cohesiveness and brittleness.

• 한국식품조리과학회지
• /
• 제22권6호통권96호
• /
• pp.792-798
• /
• 2006

This study was conducted to investigate the quality characteristics of Ginseng Jung Kwa prepared with different soaking times in sugar syrup. As soaking time in sugar syrup increased, the moisture content of Ginseng Jung Kwa decreased and the sugar concentration increased. In addition, L values of Ginseng Jung Kwa decreased significantly. A and b values were the highest at S2 and S1, respectively, and gradually decreased. Hardness, gumminess and chewiness of Ginseng Jung Kwa increased as soaking time in sugar syrup increased, but springiness and cohesiveness were not significantly different. The results of sensory evaluations showed that overall preference scored the highest for Ginseng Jung Kwa soaked in sugar syrup for 2 days.

• 한국가구학회지
• /
• 제19권6호
• /
• pp.420-427
• /
• 2008

To study the suitability of chestnut as a cask for ripening traditional liquors, the absorption property for pure water, liquor with 30% alcohol content and ethanol with 95% alcohol content were investigated for five species. Oriental oak had the greatest amount of liquid absorption while chestnut had the smallest amount. The absorption amount linearly increased with increasing soaking time. The absorption amounts for each section were greatest in RT plane, and the difference between LR plane and LT plane was very small for all soaking conditions. The anisotropy of absorption amount for five species was greatest in Japanese cedar and was smallest in white mulberry on the whole. And the change of absorption amounts according to soaking conditions tended to decrease in softwoods and increase in hardwoods, and the difference among wood species was not clear. From this result, it was found that chestnut with a small absorption amount, regarding of soaking behavior, was a good material as a cask for ripening traditional liquors, whereas small diameter oriental oak with a great absorption amount was not suitable in this purpose.

• 대한가정학회지
• /
• 제18권2호
• /
• pp.15-21
• /
• 1980

Three kinds of soybean curd were prepared with three coagulants such as calcium chloride, magnesium chloride and glucono delta lactone. The mineral contents of the three soybean curds were analyzed before soaking and after various lengths of soaking(1/2 hour, 1 hour, 2 hours, and 2 hours(water changed after 1/2 hour)). Results therefrom were as follows: 1. Before the three soybean cured were soaked, their moisture contents were 79-83g/%. The ash contents were 5.04g% in the soybean curd made with CaCl_{2}4.42g/% in the soybean curd prepared with MgCl_{2} and 3.86g/% in the soybean curd coagulated by glucono delta lactone. an analysis of calcium, magnesium and phosphorous contents showed that each element had a greater concentration in the soybean curds made with divalent mineral salts than in the soybean curd made with acid. 2. Changes taking place in the mineral contents of the soybean curds according to different soaking times were examined. The mineral contents tended to decease in process of soaking time. The soybean curds showed the highest rate of mineral dissolution after one hour of soaking, and then they tended to reabsorb minerals. When the soybean curds were soaked I freshly changed water for one hour and 30 minutes, their mineral contents indicated a greater diminishing trend but no significant difference was noticed among the different kinds of soybean curd. In case coagulant has been used excessively, it is necessary to soak the bean curds for about one hour to get the coagulant dissolved.

• 한국식품조리과학회지
• /
• 제8권3호
• /
• pp.315-321
• /
• 1992

This investigation was undertaken for me purpose of studying me sensory and textural properties of Julpyun (Korean traditional rice cake) made by various soaking time (1, 4, 6, 8, and 12 hours) of rice during storage at room temperature. The storage periods were 2, 4, 6, and 10 hours. Sensory evaluation was done by a panel of 12 judges majoring in food and nutrition. The luation was repeated 3 times. Objective evaluation was done by rheometer and color difference meter. As a result of me sensory evaluation for Julpyun made by various soaking time and storage periods, mere were significant differences (p<0.001) in most of characteristics between soaking time and storage periods. Julpyun made by soaking time for 12 hours showed the most favorite tendency during storage periods. The result of textural properties measured by rheometer showed similar trend to those of sensory evaluation. By me color difference meter, L (lightness) value were increased by increasing the soaking time. There were significant differences (p<0.001) between me samples.

• 한국식품영양과학회지
• /
• 제24권2호
• /
• pp.286-292
• /
• 1995

Proximate composition, dimension, water uptake and volume increase rates of three cultivars of Korean kidney beans, Pink(PKB), Red(RKB) and White(WKB) were compared. Significant differences in the proximate composition and calorie were not observed among samples. Hull removed samples showed the lowest ash content and the highest calorie. The rates of water uptake increased as the soaking temperature increased from 10~4$0^{\circ}C$. The moisture gain of the kidney beans during soaking showed a similar pattern to volume increase. Water uptake and volume increase rates were in the decreasing order of PKB, RKB and WKB. Moisture and volume gains held a linear relation with the square root of soaking time regardless soaking temperatures. The activation energies of water uptake and volume increase were 3033~3087 and 3077~ 3161 kcal/mole, respectively. The log time to reach a fixed moisture content showed a linear relation with soaking temperature regardless soaking temperatures. The z-values calculated from weight and volume changes decreased in proportions to the increase of hydration. The z-values of weight and volume to reach 50% hydration were 50.5~56.6$^{\circ}C$ and 48.4~61.2$^{\circ}C$, respectively.

• 한국식품조리과학회지
• /
• 제23권6호
• /
• pp.908-918
• /
• 2007

To prepare ready-to-use rice flour as de novo material for processed rice foods, glutinous(W) and normal rice grains (N) were soaked for 1, 8, and 12 hours prior to processing. One half (DG) was air-dried and milled, and the other (WG) was milled and air-dried. General, morphological and pasting properties of the flours (NDG, NWG, WDG, WWG) were compared to those of a control (raw milled rice without soaking). The general compositions of the rice flours varied with soaking. Crude ash was considerably decreased at the beginning of soaking (1 hour). With the soaking, the rice flour, having polygonal shaped particles and a layered surface, acquired particles with smooth edges, which were then uniformly distributed. Additionally, the WG flour was lighter and had a lower ${\Delta}E$ value than the DG flour, due to a higher L and less +b as a result of soaking. Compared to the control, the WBC of the normal rice flour was decreased significantly with soaking, and the WG flour had significantly lower WBCs than the DG flour. Stirring number (SN), an indicator of ${\alpha}-amylase$ activity, was highly and significantly correlated with WBC (r=-0.85, p=0.0001) in the normal rice flour. At $80^{\circ}C$, the SP and solubility of all the soaked rice flours were much higher than those of the control. Positive (r=+0.85, p=0.0001) and negative (r=-0.61, p=0.02) correlations between the SP and solubility of the normal and glutinous rice flours were found, respectively. Using RVA, the pasting temperature of NDG was lower than that of NWG (p<0.0001). The peak viscosities of all the soaked flours were significantly decreased with soaking (p<0.0l), with the highest viscosity in the normal rice flour soaked for 8 hrs. Total setback, indicative of retrogradation, was lower in NDG than in NWG, with the lowest setback at 8 hrs of' soaking. Based on these finding, the NDG flour with 8 hrs of soaking was less damaged, and had a lower total setback and lower pasting temperature, which would make it an appropriate rice flour for commercial mass production.

• 한국식품과학회지
• /
• 제27권5호
• /
• pp.697-702
• /
• 1995

떫은감 품종의 하나인 비단시를 숙성정도를 달리하여 수확하고 이들의 감장아찌 제조조건을 염농도, 침지 온도, 침지 시간, 된장첨가량을 달리하여 조사하였다. 침지액의 초기염도는 $7.5{\sim}15%$였고 침지 20일까지 급격하게 낮아져서 $6.0{\sim}12.0%$가 되었으며 초기염도나 침지 옥도가 높을수록 크게 감소하였고 된장 첨가시에는 염도의 변화가 상대적으로 적었으며 특히 침지 40일 이후에는 거의 변화가 없었다. 수용성 탄닌 함량은 염농도에 관계없이 침지 10일째까지 급격하게 감소하다가 그 이후에는 거의 변화가 없었으며 이러한 변화 경향은 된장 첨가량과 원료감의 숙성정도에 영향을 받지 않았다. 감장아찌 침지액의 pH는 영농도가 높을수록 침지 초기의 pH 감소폭이 컸으나 침지 후기에는 염농도에 관계없이 거의 비슷한 경향을 보였으며 된장을 첨가하면 전체적인 pH 감소 폭이 작아짐을 알 수 있었다. 침지 온도에 따른 pH 변화는 $5^{\circ}C$에서 아주 느리게 낮아졌으며 원료감의 숙성정도와는 무관하였다. 감장아찌중의 염분 함량은 침지중에 계속 증가하였고 침지액의 염도가 12.5% 이상일때 침지 30일째부터 급격하게 증가하였으나 된장 첨가량과 원료감의 숙성정도를 달리하여도 증가하는 경향은 거의 비슷하였는데, 특히 된장 첨가량이 많을수록 감장아찌중의 염분 함량은 낮은 것으로 나타났다. 색도는 침지시간이 경과됨에 따라 명도는 감소하고 색도는 적색이 강해지는 것으로 나타났으며 경도는 침지 15일째까지 증가하다가 침지 40일 이후에는 다시 감소하였는데 숙성된 감은 경도가 계속 낮아졌다. 이와같이 감장아찌 제조 과정에서의 이화학적 변화와 관능검사 결과를 종합해 볼때 감장아찌는 숙성이 약간 덜된 연한색 원료감을 염도 10.0%, 침지온도 $15^{\circ}C$에서 40일간 침지했을때 가장 좋은 제품을 얻을 수 있었고 된장을 20% 첨가했을때 감장아찌의 총기호도가 가장 높았다.

• Journal of the Korean Wood Science and Technology
• /
• 제37권4호
• /
• pp.357-363
• /
• 2009

본 연구에서는 작업성과 경제성을 고려하여 집성재 제작용 접착제를 목재와 유리섬유강화플라스틱(GFRP: Glass fiber reinforced plastic) 접착에 적용할 수 있는지를 검토하였다. 복합집성재는 접착제 종류와 혼합비에 따라 6가지 타입으로 제작하여 블록전단강도시험과 침지박리, 삶음박리 시험을 실시하였다. 레조시놀수지 접착제와 초산비닐 수지접착제, 에폭시수지 접착제를 사용한 복합집성재 3가지 타입과 레조시놀수지 접착제와 초산비닐수지 접착제를 혼합한 3가지 타입으로 총 6가지 타입으로 제작하였다. 블록전단시험 결과 모든 타입의 복합집성재가 KS F 3021 기준 $7.1N/mm^2$ 보다 높아 전단강도는 양호하였지만, 목파율에서는 초산비닐수지접착제가 65.9%로 가장 우수한 접착 성능을 나타내었다. 박리시험에서는 초산비닐수지 접착제를 사용한 경우 GFRP 접착층까지 포함된 경우 침지 박리는 1.08%, 삶음박리는 4.16%로 KS F 3021 합격기준인 5% 이하를 만족하였다. 레조시놀수지 접착제만을 사용 한 경우 목재 접착층은 침지박리 1.26%, 삶음박리 0%로 합격기준을 만족하였으나 GFRP 접착층을 포함시킬 경우 침지박리는 21.85%로 합격기준을 만족하지 못하였고 삶음박리의 경우만 1.45%로 만족하였다.