• Journal of Oral Medicine and Pain
• /
• v.30 no.1
• /
• pp.131-140
• /
• 2005

The purpose of this study was to examine the ablation rate of Er: YAG laser irradiation on dentin and enamel and to observe the microscopic structures of cavities formed after ablation of enamel and dentin in using a bur and cavities formed after ablation using laser. Er:YAG laser irradiated at 200 mJ, 250mJ, 300mJ at the frequency of 20Hz, 15Hz. The following results were obtained : 1. The ablation rate of dentin groups at power of 3 W-6 W was about $1.103{\sim}2.639mm^3/sec$ and there were no significant differences between power of 4.5 W$\sim$6 W. 2. The ablation rate of enamel groups at power of 3 W-6 W was about $0.413{\sim}0.969mm^3/sec$ and there were no significant differences between power of 4 W$\sim$6 W. 3. With SEM examination of the cavity surface treated with the conventional high speed bur revealed relatively flat appearance almost covered with a debris like smear layer. 4. With SEM examination of the lased surface of dentin groups revealed no smear layer and no debris and openings of dentinal tubules were clearly opened. But the lased surfaces of the groups over 3 W were irregular and particles were loosely attached on it. 5. With SEM examination of the lased surface of enamel groups revealed severely destructed surface at the 6 W group and melting drop materials at the 3 W group. But the lased surface of 4 W group revealed clearly ablated surface. Therefore when cutting teeth using Er:YAG laser, the lasing power which can make effective ablation rate and minimize the thermal effect could be 3W at dentin and 4W at enamel. But, further studies and additional data collection will be necessary for appropriate lasing condition of Er:YAG laser.

• Restorative Dentistry and Endodontics
• /
• v.35 no.2
• /
• pp.134-142
• /
• 2010

The purpose of this study was to evaluate the effect of Er,Cr:YSGG laser irradiation with hypersensitivity mode on microtensile bond strength of composite resin. Twenty extracted permanent molars were randomly assigned to six groups, according to the irradiation of Er,Cr:YSGG laser, adhesive system (Optibond FL or Clearfil SE bond) and application time of etchant (15 sec or 20 sec). Then composite resin was build up on each conditioned surface. The restored teeth were stored in distilled water at room temperature for 24 h and twelve specimens for each group were prepared. All specimens were subjected to microtensile bond strength and the fracture modes were evaluated. Also, the prepared dentin surface and laser irradiated dentin surface were examined under SEM. The results were as follows: 1. The microtensile bond strength of laser irradiated group was lower than that of no laser irradiated group. 2. Regardless of laser irradiation, the microtensile bond strength of Optibond FL was higher than that of Clearfil SE bond. And the microtensile bond strength of 20 sec etching group was higher than that of 15 sec etching group when using Optibond FL. 3. The SEM image of laser irradiated dentin surface showed prominent peritubular dentin, opened dentinal tubules and no smear layer.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.327-334
• /
• 2007

The purpose of this study was to evaluate the effect of burs on microleakage of Class V resin restorations when a self-etching primer adhesive was used. Forty Class V cavities were prepared with four different cutting burs on extracted third molars, and divided into one of four equal groups (n = 10); Group 1-plain cut carbide bur (no. 245), Group 2-cross cut carbide bur (no. 557), Group 3-fine diamond bur (TF-21F), Group 4-standard diamond bur (EX-41). The occlusal and gingival margin of cavities was located in enamel and dentin, respectively. Cavities were treated with Clearfil SE Bond and restored with Clearfil AP-X. Specimens were thermocycled, immersed in a 2% methylene blue solution for 24 hours, and bisected longitudinally. They were observed leakages at enamel and dentinal margins. Data were analyzed using Mann-Whitney and Wilcoxon signed ranked test. The results of this study were as follows; 1. At enamel margin, microleakage of group 4 was statistically higher than those of group 1, 2 and 3 (p < 0.01). 2. At dentinal margin, microleakage of group 4 was statistically higher than group 3 (p < 0.01), but group 1 and 2 were not statistically different with group 3 and 4. 3. Enamel microleakage was statistically higher than dentinal microleakage in group 1, 2 and 3 (p < 0.05), but statistical difference between the microleakage of enamel and dentinal margin was not in Group 4. In conclusion, the use of coarse diamond bur showed high microleakage at both enamel and dentinal margin when Clearfil SE Bond was used in class V cavity.

• Parasites, Hosts and Diseases
• /
• v.58 no.2
• /
• pp.195-200
• /
• 2020

Soil-transmitted helminths, including Ascaris lumbricoides and Trichuris trichiura, are important intestinal parasites mostly affecting younger people in developing countries. In 2014-2015, we performed mass fecal examinations targeting a total of 2,227 schoolchildren in 3 districts (South Dagon, North Dagon, and Hlaing-thar-yar) of Yangon Region, Myanmar, using the Kato-Katz thick smear technique. The egg positive children were subjected to a mass drug administration (MDA) using a single oral dose of 400 mg albendazole. The pre-treatment egg positive rate (EPG/person) of A. lumbricoides averaged 17.2% (15,532); it was 25.2% (21,796), 14.2% (11,816), and 12.8% (12,983) in 3 districts, respectively, and that of T. trichiura averaged 19.4% (1,074), and was 24.1% (1,040), 12.3% (852), and 21.2% (1,330) in 3 districts, respectively. Follow-up fecal examinations performed 4 months post-MDA revealed considerable decreases of A. lumbricoides prevalence (EPG/person) to av. 8.3% (12,429), and 13.7% (17,640), 8.0% (7,797), and 4.5% (11,849) in 3 districts, respectively. However, T. trichiura did not show any recognizable decrease in the prevalence (EPG/person) remaining at av. 18.2% (862), and 18.5% (888), 11.5% (812), and 23.3% (887) in 3 districts, respectively. The results demonstrated difficulty in short-term control of T. trichiura by MDA using albendazole and suggested necessity of either a long-term MDA (>10 years) or changing the albendazole regimen into 2~3-day course (total 800 or 1,200 mg), or using an alternative drug/drug combination.

• Radiation Oncology Journal
• /
• v.19 no.2
• /
• pp.142-145
• /
• 2001

Purpose : Acute leukemia with hyperleukocytosis (more than $10^5/mm^3$) is at high risk of early sudden death, usually from intracerebral hemorrhage. Emergency cranial irradiation is a relatively simple approach to solve this the problem. We summarized our experience of cranial irradiation in 24 leukemic children who presented with hyperleukocytosis. Methods and Materials : Between 1990 and 1998, 40 children with acute leukemia presenting with hyperleukocytosis were referred for emergency cranial irradiation. Among these patients, 24 children were evaluable. There were 16 boys and eight girls, their ages ranged from 2 to 13 years (median 9.5 years). The initial leukocyte counts ranged $109,910/mm^3\;to\;501,000/mm^3$. Peripheral blood smear was peformed in all patients and noted the morphology of the blast. Introduction of emergency cranial irradiation was determined by the leukocyte counts (more than 100,000/mm) and the existence of the blast in peripheral blood smear. All patients were treated with intravenous hydration with alkaline fluid and oral allopurinol. Cranial irradiation started on the day of diagnosis. With 2 Gy in one fraction in 4 patients, 4 Gy in two fractions in 20 patients. Results : The WBC count had fallen in 19 patients (83%) and no intracerebral hemorrhage occurred after irradiation. There were five cases of early deaths. Four patients died of metabolic complications, and one patient with intracerebral hemorrhage. He died 5 hours after cranial irradiation. No patient had any immediate side effect from cranial irradiation. Conclusion : Our data suggest, that emergency cranial irradiation can be safely chosen and effective in childhood leukemic patients presenting with high leukocyte counts.

• Korean Journal of Veterinary Research
• /
• v.37 no.2
• /
• pp.409-416
• /
• 1997

Bovine theileriosis caused by Theileria sergenti is the tick-borne intraery- throcytic piroplasmosis, that occurs in most regions of Korea. It results in severe economic losses on a farm caused by anemia, milk production loss, abortion and death. This study was undertaken to confirm the effects of the growth hormone and the insulin-like growth factor-I which are associated in the growth of cattle infected by T sergenti. The blood of one hundred and twenty ten-month Holstein was collected and the prepared blood smear was stained with acridine orange to investigate their parasitemia. And the hematological profiles were observed. According to the value of the hematocrit, they were categorized into four groups : Group 1 was under 20 percent, groups 2 and 3 were from over 21 to under 30 percent and from over 31 to under 35 percent and group 4 was over 36 percent. As the value of the hematocrit decreased, parasitemia(%) in erythrocytes was observed to increase(Y=-1.064X + 30.537, r=0.660). The amounts of the growth hormone and the insulin-like growth factor-I in the serum were measured by the radioimmunoassay. The growth hormone in serum of the group 1, group 2, group 3 and group 4 were observed as $0.238{\pm}0.043nmol/l$, $0.21{\pm}0.024nmol/l$, $0.366{\pm}0.035nmol/l$ and $0.646{\pm}0.223nmol/l$, respectively. The quantitative of the insulin-like growth factor-I in the same groups were observed also as $209.686{\pm}18.94ng/ml$, $250.9{\pm}12.609ng/ml$, $279.3{\pm}8.883ng/ml$ and $365.9{\pm}22.45ng/ml$, respectively. It can be concluded that the growth hormone and the insulin-like growth factor-I were observed to decrease in severe anemia due to theileriosis.

• Journal of Periodontal and Implant Science
• /
• v.29 no.1
• /
• pp.51-63
• /
• 1999

Exposure of the root surface due to gingival recession after periodontal surgery, elicit pain response when exposed to mechanical, heat, chemical or osmotic irritation. Especially patients treated with periodontal surgery, show high frequency. There have been reports that the 1 out of 7 patients complains of dentinal hypersensitivity. There have been many studies on the clinical effects of various materials on the treatment of dentinal hypersensitivity. The purposes of this study were to evaluate the effect of sodium chloride and potassium oxalate and to observe the relationship between the dentinal hypersensitivity and surface characteristics such as dentinal tubule size and number. This study included 20 teeth which were scheduled for extraction and had no pulpal disease. These teeth were divided into Root planing group, EDTA group, NaCl group and Oxalate group. Dentinal hypersensitivity is measured by tactile, pressured air and cold water using NRS (Numerical Rating Scales). Teeth were extracted under local anesthesia and each specimen was sectioned to a size about 3 X 5 mm and was examined under the scanning electron microscope (X2,000) The results were as follows, 1. The EDTA group exhibited significantly increased dentinal hypersensitivity comparing with the other groups. 2. The NaCl and Oxalate groups showed significantly reduced dentinal hypersensitivity comparing with the EDTA group. 3. As a method for dentinal hypersensitivity measurement, it was presumed thet tactile sensitivity test was not sensitive method but air blast test and cold water test were adequate method. 4. In a SEM study, the root planing group exhibited amorphous smear layer and showed no dentinal tubule orifice, but the EDTA group showed the large number of dentinal tubules. On the other hand, the NaCl and Oxalate groups did not show exposed dentinal tubules. The NaCl group showed more rough root surface than the EDTA group, and the Oxalate group showed many participates to be presumed as calcium oxalate particle. As the results from this study, root planing couldn't expose the dentinal tubule and NaCl and potassium oxalate occluded exposed dentinal tubule effectively. Dentinal hypersensitivity has close relationship with the exposure of dentinal tubules, especially with it's size and number.

• Korean Journal of Clinical Pharmacy
• /
• v.10 no.3
• /
• pp.101-106
• /
• 2000

Menopausal women experience urogenitory and vasomotor symptoms with increased risk of osteoporosis and cardiovascular diseases, which can be reduced by hormone replacement therapy. However unopposed estrogen therapy has been associated with an increased risk of endometrial hypeiplasia or cancer. The objectives of this study were to compare effects of continuous vs. sequential hormone replacement therapy (HRT) on lipid profile, bone mineral density and menopausal symptoms of postmenopausal women and to assess how they perceive the menopause and HRT culturally. In this retrospective study, women in menopause longer than 6 months, normal in the mam-mogram and Papanicolaou smear, cholesterol level lower than 190 mg/dL or triglyceride level lower 4han 500 mg/dL were treated with Srogen (conjugated equine estrogen 0.625 mg tablet) and Provera (medroxyprogesterone acetate 2.5 mg tablet) for continuous treatment(CT) or Cycloprogynova (Estradiol valerate 2 mg and Norgestrel 0.5 mg complex tablet) for sequential treatment(ST). They were evaluated for lipid profile, bone mineral density, menopausal symptoms, side effects and their perception of menopause and HRT. As results, total sixty-seven patients out of ninety-four enrollees were included in final analysis (33 in continuous therapy, 34 in sequential therapy). There were significant decrease in total cholesterol ($15.04\pm3.17$, p=0.0001), LDL ($19.72\pm3.27$, p=0.0001), and increase in HDL ($5.89\pm1.63$, p=0.0001). Bone minora) density increased significantly with HRT ($0.02\pm0.11$, p=0.0001). But, there were no significant differences in change of lipid profile between continuous and sequential therapy: Total cholesterol, $13.12\pm4.7\;vs.\;16.91\pm4.3;\;LDL\;20.53\pm4.1\;vs.\;18.93\pm5.12:HDL\;7.15\pm2.3\;vs.\;4.67\pm2.2,\;p>0.05$. Incidences of flush reduced from $75\%\;(CT)\;to\;3.13\%\;and\;71.88\%\;(ST)\;to\;9.35\%$. The change of endometrium and breast were found 3 (CT) and 5 (ST) women, respectively. Most of women recognized that HRT is necessary $(70\%)$ for postmenopausal period but did not understand well the cardiovascular protective effect. In conclusion, hormone replacement therapy was effective in improving lipid profile, bone mineral density and menopausal symptoms in both continuous and sequential treatments with similar efficacy.

• Proceedings of the KACD Conference
• /
• 2001.11a
• /
• pp.577-577
• /
• 2001

The lastest concepts in bonding are "total etch", in which both enamel and dentin are etched with an acid to remove the smear layers, and "wet dentin" in which the dentin is not blown dry but left moist before application of the bonding primer. Ideally, the application of a bonding agent to tooth structure should be insensitive to minor contamination from oral fluids. Clinically contaminations such as saliva, gingival fluid, blood and handpiece lubricant are often encountered by dentists during preparation of a restoration. The aim of this study was to evaluate the effect of contamination by hem-ostatic agents on shear bond strength of compomer restorations. One hundred and ten extracted human maxillary and mandibular molar teeth were collected. The teeth were cleaned from soft tissue remnant and debris and stored in physiologic solution until they were used. Small flat area on dentin of the buccal surface were wet ground serially with 400, 800 and 1200 abrasive paper on automatic polishing machine. The teeth were randomly divided into 11 groups. Each group was conditioned as follows: Group 1 : Dentin surface was not etched and not contaminated by hemostatic agents. Group2 : Dentin surface was not etched but was contaminated by Astringedent (Ultradent product Inc., Utah, U.S.A.). Group3 : Dentin surface was not etched but was contaminated by Bosmin (Jeil Phann, Korea.). Group4 : Dentin surface was not etched but was contaminated by Epri-dent (Epr Industries, NJ, U.S.A.). Group5: Dentin surface was etched and not contaminated by hemostatic agents. Group 6 : Dentin surface was etched and contaminated by Astringedent. Group7 : Dentin surface was etched and contaminated by Bosmin. Group8 : Dentin surface was etched and contaminated by Epri-dent. Group9 : Dentin surface was contaminated by Astringedent. The contaminated surface was rinsed by water and dried by compressed air. Group10 : Dentin surface was contaminated by Bosmin. The contaminated surface was rinsed by water aud dried by compresfed air. Group 11 : Dentin surface was contaminated by Epri-dent. The contaminated surface was rinsed by water and dried by compresfed air. After surface conditioning, F2000 was applicated on the conditoned dentin surface. The teeth were thermocycled in distilled water at $5^{\circ}C\;and\;55^{\circ}C$ for 1000 cycles. The samples were placed on the binder with the bonded compomer-dentin interface parallel to the lmife-edge shearing rod of the Universal testing machine(Zwick 020, Germany) running at a cross head speed of 1.0mmimin. There were no significant differences in shear bond strength between groups 1 and group 3 and 4, but group 2 showed significant decrease in shear bond strength compared with group 1. There were no significant differences in shear bond strength between group 5 and group 7 and 8, but group 6 showed significant decrease in shear bond strength compared with group 5. There were no significant differences in shear bond strength between group 5 and group 9, 10 and 11.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.479-489
• /
• 1997

The purpose of this study was to evaluate the effect of the Nd : YAG laser on the tooth hypersensitivity by the observation of the morphological changes of the dentinal surface irradiated with Nd : YAG laser by use of SEM. In 40 mandibular and maxillary molars without any carious lesion or restoration, severe attrition and abrasion, Enamel was removed with fine grit diamond bur and exposed dentinal surfaces were polished with Soflex discs. In control group (10 teeth), exposed dentinal surfaces were acid-etched with 10 % Maleic acid for 15 seconds. In the experimental group 1 (10 teeth), acid-etched dentinal surfaces with 10% Maleic acid were prepared by Nd : YAG laser (6 watts power, 1 psi water, 18 psi air) for 2 minutes. In the experimental group 2 (10 teeth), exposed dentinal surfaces were irradiated with Nd: YAG laser (10 watts power, 3 psi water, 10 psi air) until the painted black stains on the dentinal surfaces were completely removed. In the experimental group 3 (10 teeth). dentinal surfaces were prepared with Nd : YAG laser (6 watts power, 1 psi water, 18 psi air) until the painted black stanins on them were completely removed and then the irradiated dentinal surfaces were acid-etched with 10 % Maleic acid for 15 seconds. The specimens were routinely processed and observed with scanning electron microscope. The results were as follows : 1. In the irradiated dentinal surfaces, the characteristics of the melting and recrystalization on the dentinal surfaces were observed. Compared with the results in the control group, we could observe that in the irradiated dentinal surfaces, the aperture of the dentinal tubules were reduced and there were more debris obstructing the dentinal tubules. 2. In the irradiated dentinal surfaces, crater structures were commonly present and in the crater bottoms, there were a lot of bead like melted dentin structures, which had the ruptured opening in the center of them. 3. The melted dentins and cracks in the smear layer were less frequently observed in the irradiated dentinal surfaces using copious cooling water than in the irradiated dentinal surfaces using scare cooling water.