• 제목/요약/키워드: smart node

검색결과 350건 처리시간 0.023초

A Low-Energy Ultra-Wideband Internet-of-Things Radio System for Multi-Standard Smart-Home Energy Management

  • Khajenasiri, Iman;Zhu, Peng;Verhelst, Marian;Gielen, Georges
    • IEIE Transactions on Smart Processing and Computing
    • /
    • 제4권5호
    • /
    • pp.354-365
    • /
    • 2015
  • This work presents an Internet of Things (IoT) system for home energy management based on a custom-designed Impulse Radio Ultra-Wideband (IR-UWB) transceiver that targets a generic and multi-standard control system. This control system enables the interoperability of heterogeneous devices: it integrates various sensor nodes based on ZigBee, EnOcean and UWB in the same middleware by utilizing an ad-hoc layer as an interface between the hardware and software. The paper presents as a first the design of the IR-UWB transceiver for a portable sensor node integrated with the middleware layer, and also describes the receiver connected to the control system. The custom-designed low-power transmitter on the sensor node is fabricated with 130 nm CMOS technology. It generates a signal with a 1.1 ns pulse width while consuming $39{\mu}W$ at 1 Mbps. The UWB sensor node with a temperature measurement capability consumes 5.31 mW, which is lower than the power level of state-of-the-art solutions for smart-home applications. The UWB hardware and software layers necessary to interface with the control system are verified in over-the-air measurements in an actual office environment. With the implementation of the presented sensor node and its integration in the energy management system, we demonstrate achievement of the broad flexibility demanded for IoT.

원격 자동차 고장 진단 시스템 개발에 대한 연구 (A study on Development of Remote Vehicle Fault Diagnostic System)

  • 라이오넬;장종욱
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2015년도 추계학술대회
    • /
    • pp.224-227
    • /
    • 2015
  • 일반적으로 자동차드라이버의 스마트폰을 통한 데이터전송은 자동차운전자의 핸드폰은 데이터를 실시간으로 원격데이터 센터에 전송하는 경우에 용량 의존적인 순위를 가지고 있다. 생성되는 진단보드 데이터들은 드라이버의 폰에서의 모바일 진단 어플리케이션에 임시적으로 저장하고, 인터넷에 연결 되었을 때 데이터 센터에 전송한다. 클라우드에서 실행에 방해하는 다른 태스크들이 없는 원격 자동차 어플리케이션 사용방법을 위한 node.js는 모바일 네트워크을 통한 클라우드에서 데이터 저장업무를 다루기 위하여 적합하다. 우리는 외부 어플리케이션으로부터 driver inputs and delivers output을 패스하는 원격 유저와 운용하는 스마트폰 어플리케이션에서 자동차와의 어플리케이션 interface 방법을 사용하는 실시간 분석 안드로이드 어플리케이션 반응을 시뮬레이션 통해 제안된 아키텍쳐의 유효성을 입증한다. 이 논문에서, 우리는 이벤트 루프 접근을 기반으로 하는 이것은 웹서버 구조를 특징으로 하는 원격 자동차 결함 진단 시스템 연구를 제안한다.

  • PDF

Development of wearable Range of Motion measurement device capable of dynamic measurement

  • Song, Seo Won;Lee, Minho;Kang, Min Soo
    • International journal of advanced smart convergence
    • /
    • 제8권4호
    • /
    • pp.154-160
    • /
    • 2019
  • In this paper, we propose the miniaturization size of wearable Range of Motion(ROM) and a system that can be connected with smart devices in real-time to measure the joint movement range dynamically. Currently, the ROM of the joint is directly measured by a person using a goniometer. Conventional methods are different depending on the measurement method and location of the measurement person, which makes it difficult to measure consistently and may cause errors. Also, it is impossible to measure the ROM of joints in real-life situations. Therefore, the wearable sensor is attached to the joint to be measured to develop a miniaturize size ROM device that can measure the range of motion of the joint in real-time. The sensor measured the resistance value changed according to the movement of the joint using a load cell. Also, the sensed analog values were converted to digital values using an Analog to Digital Converter(ADC). The converted amount can be transmitted wireless to the smart device through the wearable sensor node. As a result, the developed device can be measured more consistently than the measurement using the goniometer, communication with IoT-based smart devices, and wearable enables dynamic observation. The developed wearable sensor node will be able to monitor the dynamic state of rehabilitation patients in real-time and improve the rapid change of treatment method and customized treatment.

Data Fusion 기술을 활용한 스마트선박 내 효율적 데이터 전송 방안 (Efficient Data Transmission Scheme with Data Fusion inside a Smart Vessel)

  • 김연근;이성로;정민아;김범무;민상원
    • 한국통신학회논문지
    • /
    • 제39C권11호
    • /
    • pp.1146-1150
    • /
    • 2014
  • 최근 스마트선박 기술 관련 연구에 대한 관심이 증가하고 있다. 또한 스마트선박 기술의 발달로 데이터가 sensor node들에 의해 수집되면서 전송횟수의 증가로 인해 network의 과부하를 야기할 수 있다. 따라서 본 논문에서는 스마트선박 내부의 sensor node에 대한 data 전송횟수에 대한 빈도수를 줄이기 위해 data fusion를 이용하여 data를 가공 처리하는 기법을 적용하였다. 스마트선박 내부에서 수집되는 data는 의미 있는 data 가공하여 센터로 전송되어 network의 부하를 줄이고 효율적으로 data를 전송할 수 있는 방안을 제시하였다.

재활환자를 위한 IoT 기반의 실시간 모니터링이 가능한 ROM 측정 장치 개발 (Development of ROM Measurement Device capable of IoT-based Real-time Monitoring for Rehabilitation Patients)

  • 강민수
    • 한국인터넷방송통신학회논문지
    • /
    • 제18권4호
    • /
    • pp.111-116
    • /
    • 2018
  • 본 논문에서는 관절 각도계를 사용하여 관절가동범위의 측정하던 것을 각도계를 사용하지 않고 플렉서블 센서를 이용하여 측정하고 측정된 값을 스마트 디바이스와 연동하여 실시간 모니터링이 가능하게 하였다. 현재의 관절가동 범위 측정은 관절 각도기를 활용하여 사람이 직접 측정하고 있다. 이러한 방법은 측정하는 사람의 측정 방법과 위치에 따른 오류로 일관성 있는 측정이 어려워 오차가 발생할 수 있다. 그래서 측정해야 할 관절에 센서를 부착하여 관절의 운동 범위를 측정하였다. 측정을 위한 센서는 플랙서블 형태로 관절의 움직임에 따라 변화되는 저항 값을 측정하는 센서로서 센싱 된 값을 ROM 센서노드를 통하여 무선으로 스마트 디바이스로 전송될 수 있도록 하였다. 개발 된 ROM 측정 장치는 일반적인 관절 각도기를 활용한 측정보다 일관성 있는 측정이 이루어 질 수 있고 스마트 디바이스와 연동하여 실시간 모니터링 함으로써 관절의 움직임에 따른 신속한 진단으로 환자의 빠른 치료와 재활의료 발전에 도움이 될 것이다.

MAC Layer Based Certificate Authentication for Multiple Certification Authority in MANET

  • Sekhar, J. Chandra;Prasad, Ramineni Sivarama
    • IEIE Transactions on Smart Processing and Computing
    • /
    • 제3권5호
    • /
    • pp.298-305
    • /
    • 2014
  • In this study, a novel Randomly Shifted Certification Authority Authentication protocol was used in ad hoc networks to provide authentication by considering the MAC layer characteristics. The nodes achieve authentication through the use of public key certificates issued by a CA, which assures the certificate's ownership. As a part of providing key management, the active CA node transfers the image of the stored public keys to other idle CA nodes. Finally the current active CA randomly selects the ID of the available idle CA and shifts the CA ownership by transferring it. Revoking is done if any counterfeit or duplicate non CA node ID is found. Authentication and integrity is provided by preventing MAC control packets, and Enhanced Hash Message Authentication Code (EHMAC) can be used. Here EHMAC with various outputs is introduced in all control packets. When a node transmits a packet to a node with EHMAC, verification is conducted and the node replies with the transmitter address and EHMAC in the acknowledgement.

Node-Level Trust Evaluation Model Based on Blockchain in Ad Hoc Network

  • Yan, Shuai-ling;Chung, Yeongjee
    • International journal of advanced smart convergence
    • /
    • 제8권4호
    • /
    • pp.169-178
    • /
    • 2019
  • Due to the characteristics of an ad hoc network without a control center, self-organization, and flexible topology, the trust evaluation of the nodes in the network is extremely difficult. Based on the analysis of ad hoc networks and the blockchain technology, a blockchain-based node-level trust evaluation model is proposed. The concepts of the node trust degree of the HASH list on the blockchain and the perfect reward and punishment mechanism are adopted to construct the node trust evaluation model of the ad hoc network. According to the needs of different applications the network security level can be dynamically adjusted through changes in the trust threshold. The simulation experiments demonstrate that ad-hoc on-demand distance vector(AODV) Routing protocol based on this model of multicast-AODV(MAODV) routing protocol shows a significant improvement in security compared with the traditional AODV and on-demand multipath distance vector(AOMDV) routing protocols.

Efficient Mobile Sink Location Management Scheme Using Multi-Ring in Solar-Powered Wireless Sensor Networks

  • Kim, Hyeok;Kang, Minjae;Yoon, Ikjune;Noh, Dong Kun
    • 한국컴퓨터정보학회논문지
    • /
    • 제22권10호
    • /
    • pp.55-62
    • /
    • 2017
  • In this paper, we proposes a multi-ring based mobile sink location scheme for solar-powered wireless sensor network (WSN). The proposed scheme maintains the multi-rings in which nodes keep the current location of sink node. With the help of nodes in multi-rings, each node can locate the sink node efficiently with low-overhead. Moreover, because our scheme utilizes only surplus energy of a node, it can maintain multiple rings without degrading any performance of each node. Experimental results show that the proposed scheme shows much better latency and scalability with lower energy-consumption than the existing single-ring based scheme.

NodeMCU ESP-12E 보드를 이용한 Wifi 로봇자동차 구현 (Implementation of Wifi Robot Car using NodeMCU ESP-12 Board)

  • 손병진;이동우;서동현;김미성;조재익;최병윤
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2017년도 춘계학술대회
    • /
    • pp.475-477
    • /
    • 2017
  • 본 논문에서는 NodeMCU ESP-12E 보드를 사용하여 Wifi 네트워크에서 웹서버로 동작하는 로못 자동차를 구현한 후, 스마트폰과 PC의 웹 브라우저에서 올바로 제어됨을 확인하였다. 연구 결과는 ESP-12E 보드를 사용한 Wifi 가정 자동화에 응용 가능하다.

  • PDF

Hadoop 클러스터에서 네임 노드와 데이터 노드가 빅 데이터처리 성능에 미치는 영향에 관한 연구 (A Study on the Effect of the Name Node and Data Node on the Big Data Processing Performance in a Hadoop Cluster)

  • 이영훈;김용일
    • 스마트미디어저널
    • /
    • 제6권3호
    • /
    • pp.68-74
    • /
    • 2017
  • 빅 데이터 처리는 파일이나 이미지, 동영상 등 다양한 형태의 데이터를 처리하여 문제를 해결하고 통찰력 있는 유용한 정보를 제공한다. 현재 빅 데이터 처리를 위해 다양한 플랫폼이 사용되지만, 하둡이 가지는 단순성, 생산성, 확장성, 그리고 내고장성 때문에 많은 기관, 기업에서 빅 데이터 처리에 하둡을 사용하고 있다. 또한, 하둡은 다양한 하드웨어 플랫폼으로 클러스터를 구축할 수 있으며, 네임 노드(Master)와 데이터 노드(Slave)로 구분하여 빅 데이터를 처리한다. 본 논문에서는 실제 기관과 기업에서 사용하는 완전분산모드를 사용하였으며 원활한 테스트를 위해 저전력이고 저가인 싱글 보드를 사용하여 하둡 클러스터를 구축하였다. 네임 노드의 성능 영향 분석은 싱글 보드와 랩톱을 네임 노드로 사용하여 같은 데이터 처리를 통하여 비교하였으며 데이터 노드의 개수에 따른 영향 분석은 싱글 보드를 기존 클러스터의 개수에서 2배까지 늘려가며 데이터 노드가 미치는 영향을 분석하였다.