• The Korean Journal of Petroleum Geology
• /
• v.6 no.1_2 s.7
• /
• pp.8-19
• /
• 1998

In the Sinri area located at the mid western boundary of the Jinan basin, the Manduksan Formation which mainly consists of coarse sandstone narrowly intercalated with shale and the alternation of sand and shale and the Dalgil Formation mainly of shale are distributed. It consists of four lithofacies, such as coarse sandstone, interbedded sandstone/shale, shale and volcanic rock lithofacies. All sediments are interpreted to be deposited by turbidity currents and free fallouts in a lacustrine basin. In these rocks many penecontemporaneous defomation structures are observed such as fold and thrust fault at large scale, and swelling, boudin structure, flame structure, load structure, ptygmatic fold and convolute bedding at small scale. All these structures are developed between upper and lower undisturbed sedimentary strata. Two large folds are similar folds, but lower one gradually developed into concentric shape. The swelling structures by convergence of the sediments are observed in the hinge area and the boudin structures are developed in the limb. The thrust faults including minor folds and sandstone lobes show duplex structure with asymmetric and kink fold on and below in front of the detached sandstone layer. Development of the swellings, boudins and lobes indicates the flexbility of the sediments during deformational episodes. The folds and thrust faults rarely contain fractures relative their scales and lithologies. This feature also indicates the retrievability of sediments during deformation. At the flanks of the thrust faults the normal faults are formed contemporaneously. The deformation structures at small scale such as flame structures, load structures, ptygmatic folds and convolute beddings are syndepositional and penecontemporaneous, which show the effects of tectonic movements. All these deformed sedimentary structures of the Sinri area suggest the continuing tectonic movements during and/or after deposition.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.101.1-101.1
• /
• 2012

Interplanetary dust particles are observable as zodiacal light, which is the sunlight scattered by the interplanetary dust particles. The origins of interplanetary dust particles are still in question because they are eroded by Poynting-Robertson photon drag and mutual collisions among dust particles. The small-scale structures in the zodiacal light provided a clue to specify their origins. Asteroidal debris were detected as band-like structures (dust bands), and the cometary large particles were detected as narrow trails (dust trails). However, little is confirmative about their detailed origins and mineralogical compositions because of the lack of observational data particularly in the optical wavelength. We made a high-resolution optical zodiacal light map based on the CCD observations at Mauna Kea, Hawaii. We analyzed data taken on November 12, 2004. After the data reduction, such as flat fielding and subtraction of airglow emissions, we succeeded in the construction of the zodiacal light map with the spatial resolution of 3' in the solar elongation between 45 degree and 180 degree. This is the highest resolution map in the visible wavelength so far. In this map, we confirmed the dust bands structures near the ecliptic plane. We will discuss about the similarities and the differences between optical and infrared dust bands.

• Smart Structures and Systems
• /
• v.1 no.2
• /
• pp.141-158
• /
• 2005

A new design of distributed crack sensors based on the topological change of transmission line cables is presented for the condition assessment of reinforced concrete (RC) structures during and immediately after an earthquake event. This study is primarily focused on the performance of cable sensors under dynamic loading, particularly a feature that allows for some "memory" of the crack history of an RC member. This feature enables the post-earthquake condition assessment of structural members such as RC columns, in which the earthquake-induced cracks are closed immediately after an earthquake event due to gravity loads, and are visually undetectable. Factors affecting the onset of the feature were investigated experimentally with small-scale RC beams under cyclic loading. Test results indicated that both crack width and the number of loading cycles were instrumental in the onset of the memory feature of cable sensors. Practical issues related to dynamic acquisition with the sensors are discussed. The sensors were proven to be fatigue resistant from shake table tests of RC columns. The sensors continued to show useful performance after the columns can no longer support additional loads.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1807-1812
• /
• 2004

Sinusoidal wavy channel is one of the most commonly used devices in the industry for achieving mixing and heat transfer. Here we report on results obtained from the DNS of flow inside the wavy channel performed using the finite volume technique. As a primary stage to obtain the optimal design for heat transfer and mixing, this study observed the basic flow structures in a wavy channel. The mass flow rate is kept constant with friction Reynolds number of $Re_{\tau}$ = 140 . Time- and space-averaged and instantaneous flow fields are illustrated to observe the flow structures. Although the direct comparison of results between turbulent wavy and flat channel is somehow difficult due to the different flow phenomena derived from different configuration, here the mean streamwise velocity and RMS of velocities at same $Re_{\tau}$ of two different channels are compared. The basic difference between wavy and flat channel flow is the existence of small scale wall vortices along the walls in a wavy channel. These vortices make flow more complex, which will accompany the increase of heat transfer, pressure drop and drag.

• Smart Structures and Systems
• /
• v.4 no.6
• /
• pp.809-828
• /
• 2008

Real-time hybrid testing is an attractive method to evaluate the response of structures under earthquake loads. The method is a variation of the pseudodynamic testing technique in which the experiment is executed in real time, thus allowing investigation of structural systems with time-dependent components. Real-time hybrid testing is challenging because it requires performance of all calculations, application of displacements, and acquisition of measured forces, within a very small increment of time. Furthermore, unless appropriate compensation for time delays and actuator time lag is implemented, stability problems are likely to occur during the experiment. This paper presents an approach for real-time hybrid testing in which time delay/lag compensation is implemented using model-based response prediction. The efficacy of the proposed strategy is verified by conducting substructure real-time hybrid testing of a steel frame under earthquake loads. For the initial set of experiments, a specimen with linear-elastic behavior is used. Experimental results agree well with the analytical solution and show that the proposed approach and testing system are capable of achieving a time-scale expansion factor of one (i.e., real time). Additionally, the proposed method allows accurate testing of structures with larger frequencies than when using conventional time delay compensation methods, thus extending the capabilities of the real-time hybrid testing technique. The method is then used to test a structure with a rate-dependent energy dissipation device, a magnetorheological damper. Results show good agreement with the predicted responses, demonstrating the effectiveness of the method to test rate-dependent components.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.7 no.3
• /
• pp.147-156
• /
• 2003

In this paper, a damage detection method using mode shapes of truss structures is presented. The theory is formulated based on the changes in the modal strain energy in a truss type structures due to damage. To examine the feasibility, the theory is applied to an experimental data of a 1:6 scale model of a typical hexagonal truss structure. The experiment consists of 17 damage scenarios subjected to three different types of damage. The damage evaluation results show that the proposed method detects successfully damage in truss elements and also show that the performance of proposed method can be significantly impacted by the noise in the measurement data for small damage.

• Structural Engineering and Mechanics
• /
• v.56 no.2
• /
• pp.223-240
• /
• 2015

In this work, a nonlocal quasi-3D trigonometric plate theory for micro/nanoscale plates is proposed. In order to introduce the size influences, the Eringen's nonlocal elasticity theory is utilized. In addition, the theory considers both shear deformation and thickness stretching effects by a trigonometric variation of all displacements within the thickness, and respects the stress-free boundary conditions on the top and bottom surfaces of the plate without considering the shear correction factor. The advantage of this theory is that, in addition to considering the small scale and thickness stretching effects (${\varepsilon}_z{\neq}0$), the displacement field is modelled with only 5 unknowns as the first order shear deformation theory (FSDT). Analytical solutions for vibration of simply supported micro/nanoscale plates are illustrated, and the computed results are compared with the available solutions in the literature and finite element model using ABAQUS software package. The influences of the nonlocal parameter, shear deformation and thickness stretching on the vibration behaviors of the micro/nanoscale plates are examined.

• Steel and Composite Structures
• /
• v.48 no.4
• /
• pp.443-459
• /
• 2023

This paper investigates the stability of a bi-directional functionally graded (BD-FG) cylindrical beam made of imperfect concrete, taking into account size-dependency and the effect of geometry on its stability behavior. Both buckling and dynamic behavior are analyzed using the modified coupled stress theory and the classical beam theory. The BD-FG structure is created by using porosity-dependent FG concrete, with changing porosity voids and material distributions along the pipe radius, as well as uniform and nonuniform radius functions that vary along the beam length. Energy principles are used to generate partial differential equations (PDE) for stability analysis, which are then solved numerically. This study sheds light on the complex behavior of BD-FG structures, and the results can be useful for the design of stable cylindrical microstructures.

• Steel and Composite Structures
• /
• v.1 no.1
• /
• pp.17-32
• /
• 2001

The Rosette-joining system is a completely new press-joining method for cold-formed steel structures. One Rosette-joint has a shear capacity equal to that of approximately four screws or rivets. The Rosette thin-walled steel truss system presents a new fully integrated prefabricated alternative to light-weight roof truss structures. The trusses are built up on special industrial production lines from modified top hat sections used as top and bottom chords and channel sections used as webs which are joined together with the Rosette press-joining technique to form a completed structure easy to transport and install. A single web section is used when sufficient but can be strengthened by double-nesting two separate sections or by using two lateral profiles where greater compressive axial forces are met. An individual joint in the truss can be strengthened by introducing a hollow bolt into the joint hole. The bolt gives the connection capacity a boost of approximately 20%. A series of laboratory tests have been carried out in order to verify the Rosette truss system in practice. In addition to compression tests on individual sections of different lengths, tests have also been done on small structural assemblies and on actual full-scale trusses of a span of 10 metres. Design calculations have been performed on selected roof truss geometries based on the test results, FE-analysis and on the Eurocode 3 and U.S.(AISI) design codes.

• Steel and Composite Structures
• /
• v.18 no.2
• /
• pp.425-442
• /
• 2015

This paper addresses theoretically the bending and buckling behaviors of size-dependent nanobeams made of functionally graded materials (FGMs) including the thickness stretching effect. The size-dependent FGM nanobeam is investigated on the basis of the nonlocal continuum model. The nonlocal elastic behavior is described by the differential constitutive model of Eringen, which enables the present model to become effective in the analysis and design of nanostructures. The present model incorporates the length scale parameter (nonlocal parameter) which can capture the small scale effect, and furthermore accounts for both shear deformation and thickness stretching effects by virtue of a sinusoidal variation of all displacements through the thickness without using shear correction factor. The material properties of FGM nanobeams are assumed to vary through the thickness according to a power law. The governing equations and the related boundary conditions are derived using the principal of minimum total potential energy. A Navier-type solution is developed for simply-supported boundary conditions, and exact expressions are proposed for the deflections and the buckling load. The effects of nonlocal parameter, aspect ratio and various material compositions on the static and stability responses of the FGM nanobeam are discussed in detail. The study is relevant to nanotechnology deployment in for example aircraft structures.