• Atmosphere
• /
• 제26권4호
• /
• pp.523-540
• /
• 2016

The effects of satellite observations on large-scale atmospheric circulations in the reanalysis data are investigated by comparing the latest Japanese Meteorological Association's reanalysis data (JRA-55) and its family data, JRA-55 Conventional (JRA-55C). The latter is identical to the former except that satellite observations are excluded during the data assimilation process. Only conventional datasets are assimilated in JRA-55C. A simple comparison revealed a considerable difference in temperature and zonal wind fields in both the stratosphere and troposphere. Such differences are particularly large in the Southern Hemisphere and whole stratosphere where conventional ground-based measurements are limited. The effects of satellite observations on the zonal-mean tropospheric circulations are further examined in terms of the Hadley cell, eddy-driven jet, and mid-latitude storm tracks. In both hemispheres, JRA-55C exhibits slightly weaker and narrower Hadley cell than JRA-55. This is consistent with a weaker diabatic heating in JRA-55C. The eddy-driven jet shows a small difference in its latitudinal location only in the Southern Hemisphere. Likewise, while the Northern-Hemisphere storm tracks are quantitatively similar in the two datasets, Southern-Hemisphere storm tracks are relatively weaker in JRA-55C than in JRA-55. Their difference is comparable to the uncertainty between reanalysis datasets, indicating that satellite data assimilation could yield significant corrections in the zonal-mean circulation in the Southern Hemisphere.

• Journal of Korean Society on Water Environment
• /
• 제31권5호
• /
• pp.563-568
• /
• 2015

Natural Organic Matter (NOM) is a precursor of disinfection by products. Recently, with the increase in NOM concentration caused by a large amount of algae, the creation of disinfection by-products is becoming a big issue. Therefore, in this study, PAC+Membrane+F/A hybrid process was organized to control disinfection by-products in small-scale water treatment plants. The optimal dosage of PAC was set at 20 mg/L through Lab. scale test. Also, it is judged that NOM concentration must be less than 1.0 mg/L to meet the recommended criteria of drinking water quality monitoring items of disinfection by-products during chlorination. The existing conventional water treatment process was compared to the independent F/A process and the PAC+Membrane+F/A hybrid process through pilot plant operation, and the result showed that there is a need to apply an advanced water treatment process to remove not only NOMs but also Geosmin caused by algae. Accordingly, it is considered that applying the PAC+Membrane+F/A process will help in controling a clogged filter caused by a large amount of algae and disinfection by-products created by chlorination and can be used as an advanced water treatment process to meet the recommended criteria of drinking water quality monitoring items.

• Steel and Composite Structures
• /
• 제34권2호
• /
• pp.261-277
• /
• 2020

The main objective of this research paper is to consider vibration analysis of vacancy defected graphene sheet as a nonisotropic structure via molecular dynamic and continuum approaches. The influence of structural defects on the vibration of graphene sheets is considered by applying the mechanical properties of defected graphene sheets. Molecular dynamic simulations have been performed to estimate the mechanical properties of graphene as a nonisotropic structure with single- and double- vacancy defects using open source well-known software i.e., large-scale atomic/molecular massively parallel simulator (LAMMPS). The interactions between the carbon atoms are modelled using Adaptive Intermolecular Reactive Empirical Bond Order (AIREBO) potential. An isogeometric analysis (IGA) based upon non-uniform rational B-spline (NURBS) is employed for approximation of single-layered graphene sheets deflection field and the governing equations are derived using nonlocal elasticity theory. The dependence of small-scale effects, chirality and different defect types on vibrational characteristic of graphene sheets is investigated in this comprehensive research work. In addition, numerical results are validated and compared with those achieved using other analysis, where an excellent agreement is found. The interesting results indicate that increasing the number of missing atoms can lead to decrease the natural frequencies of graphene sheets. It is seen that the degree of the detrimental effects differ with defect type. The Young's and shear modulus of the graphene with SV defects are much smaller than graphene with DV defects. It is also observed that Single Vacancy (SV) clusters cause more reduction in the natural frequencies of SLGS than Double Vacancy (DV) clusters. The effectiveness and the accuracy of the present IGA approach have been demonstrated and it is shown that the IGA is efficient, robust and accurate in terms of nanoplate problems.

• Research in Community and Public Health Nursing
• /
• 제11권1호
• /
• pp.90-104
• /
• 2000

This study was carried out to investigate the current state of occupational health management and characteristics of employees working in small-scale-enterprises (SSE) employing less than 50 workers. Samples were chosen among the two thousands employees working in 838 factories where located in Youngdungpo-Ku, Seoul, Korea. The study results were as followed: 1. Most factories investigated in the study were manufactures (68.6%) which were established in 5 to 10 years ago (29.2%), employing less than 5 workers (72.9%) and registered in accident compensation insurance (23.0%). 2. Health screening was undertaken in 24.9% workplaces for periodic health examination and in 1.5% for special health examination. Environmental monitoring was done in 3.3% factories. Very few factories displayed Material Substance Data Sheet (MSDS) in 3.1% among the total factories. 3. Workplaces usually had their own toilets in 75.9% and washing basin in 58.6% as types of sociowelfare facilities. 4. Employees responded in the study were mostly in the range of age from 30 to 39 in 34.7%. male in 84.8%. the married in 70.3%. manual workers in 42.0%. mostly working regularly 51 hours per a week in 48.2% and earned 710.000 Won to 1.000.000 Won per month in 35.0%. Medical utilization for employees were covered by factories sponsored medical insurance in 12.7% and by provincial sponsored medical insurance in 83.4%. 5. Two point six percents of employees were suffered by diseases. The health complaints indicated were mainly digestive problems in 46.7% and hypertension in 24.4%. 6. Employees wore personal protective equipments for work such as gloves in 48.1%. safety shoes in 30.5%. ear plug in 5.5% and mask in 6.9%. Based on the results of study, we recommend that various types of occupational health management should be developed according to workplace working condition of each factory. In addition to the development of occupational health strategies. we think that it is more important to monitor and to allocate how effectively they operate each other on the basis of longitudinal continuity. Besides, we would like to insist that these all management effort should be focused on prevention of disease and occupational health education of employees.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• 제27권2호
• /
• pp.79-93
• /
• 2015

Three-dimensional structures of large ocean rings in the Gulf Stream region are investigated using the HYbrid Coordinate Ocean Model (HYCOM). Numerically simulated flow structures around four selected cyclonic and anticyclonic rings are compared with two different horizontal resolutions: $1/12^{\circ}$ and $1/48^{\circ}$. The vertical distributions of Lagrangian Coherent Structures (LCSs) are analyzed using Finite Size Lyapunov Exponent (FSLE) and Okubo-Weiss parameters (OW). Curtain-shaped FSLE ridges are found in all four rings with extensions of surface ridges throughout the water columns, indicating that horizontal stirring is dominant over vertical motions. Near the high-resolution rings, many small-scale flow structures with size O(1~10) km are observed while these features are rarely found near the low-resolution rings. These small-scale structures affect the flow pattern around the rings as flow particles move more randomly in the high-resolution models. The dispersion rates are also affected by these small-scale structures as the relative horizontal dispersion coefficients are larger for the high-resolution models. The absolute vertical dispersion rates are, however, lower for the high-resolution models, because the particles tend to move along inclined eddy orbits when the resolution is low and this increases the magnitude of absolute vertical dispersion. Since relative vertical dispersion can reduce this effect from the orbital trajectories of particles, it gives a more reasonable magnitude range than absolute dispersion, and so is recommended in estimating vertical dispersion rates.

• Korean Journal of Occupational Health Nursing
• /
• 제10권1호
• /
• pp.74-92
• /
• 2001

This study was carried out to investigate the types of health documents for nurses, the content of informations in the documents, and writing behaviors of occupational health nurses. Health documents were collected from 7 nurses who were working in 7 group occupational health agencies (GOHA) located at Seoul and Inchon area in Korea. The collected health documents written in January to June 1999 were analyzed, and revealed the following results. 1) The occupational health nurses were using 9 to 18 different types of health documents. The contents of the documents were considered quite similar to each other with slightly different headings and items to record. Among different types of health documents. Health Management Card for Workplace', Nursing performance sheet and Workplace environmental checklist were in common among nurses and were used for content analysis. 2) The 'Health Management Card for Workplace' was the only formal sheet of small-scale-enterprises (SSE) for health management, in which health and safety related information was recorded. The information on nursing services were recorded on the Nursing performance sheet, which has slightly different names on each type with similar contents. The Workplace environment checklist was for the information on general work environment management and mainly status of workplace hygiene. This checklist is to be used by or with nurses among the 3 types health professional team such as doctor, hygienist, and nurse, but it seemed not being used frequently by nurses. 3) Analysis on recording tendencies of nurses revealed that the writing styles of occupational health nurses were associated with 'memo' using a few number of words and short sentences. The amount of information by this kind of recording style was considered not enough for health management situation. The possible reasons for nurses to use this writing style might be insufficient time for recording and improper designed format of health documents. Because nurses working in SSE spend more time on the roads to visit workplaces, nurses may not found enough time for recording properly within their working time. In addition, the health records were designed to focus on the frequency of nurse's performance in certain types of work rather than on the method they used to deal with health problems. In conclusion, this study suggests that some steps are necessary to develop health documents and recording system which is appropriate to occupational health nurses. The educational need for nurses on appropriate recording behavior is also recommended.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• 제6권2호
• /
• pp.281-291
• /
• 1996

458 female workers working in the small and medium scaled industries in Inchon area were surveyed to study their general characteristics, health behavior, working and environmental conditions, awareness of exposure at hazardous materials, current health status, and degree of working satisfaction. Self-administered questionnaire was distributed to the female workers with the explanation by trained interviewer on the purpose of survey and the method how to answer. The results were as follows : (1) 75.5% of the respondents are living with their families and others are living in domitary or rent house for herself. Age distribution ranges from teenagers to warren in their forties. In marital status 69.0% of workers are single and 31.0% of them have ever married. 69.4% of workers are high school graduate. The size of factory is 48.3% with less than 300 workers, 42.1% with 300~500 workers. (2) Most of the workers(86.7%) are full time workers, 52% of the respondents have working experiences in other factories. More than 65% have fewer than 5 years working experience. (3) The awareness of exposure at noise was 33% of respondents, it was significantly different by skilled status. The awareness of exposure at dust, other hazardous material was each 13.3%, 12.4% of respondents. (4) 26% of them are unsatisfied with their working cognitions and 43.7% of them are unsatisfied with their welfare in occupational system unsatisfactory rate of promotion is higher in the unmarried workers(45.6%), skilled workers(47.2%), full time workers(47.4%), long term workers(50%), and awareness group of exposure hazardous material(51.3%), compared to married women workers, unskilled workers, part-time workers, short term workers and unawareness group of exposure at hazardous materials. (5) The index of working satisfaction is rated on a scale of 1 to 10 with the higher point indicating higher satisfaction. Among the selected variables, marital status, working status, the awareness of exposure at hazardous materials, were statistically significant with the index of working satisfaction. (6) By multiple regression analysis showed that the determinant factors of index of working condition were health index, the awareness of exposure at dust, the awareness of exposure other hazardous materials, marital status and working period. In conclusion, there is a significant relationship between the awareness of exposure at hazardous material the index of working satisfaction. Therefore if the workers are less exposed to the hazardous material and are educated properly they will be more satisfied with their work thus improving their health and productivity. Finally, with the result of this study, there is a great need for the development of a health promotion program and a welfare policy for small-scale factories.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제35권11호
• /
• pp.1407-1413
• /
• 2011

In this paper, the structural design for composite blade was performed and full scale structural test was conducted to verify the structural design and integrity of composite blade. Firstly, FE analysis was performed using commercial software ABAQUS under conditions of rated wind speed and Case H in IEC 61400-2. Lay-up sequence and ply thickness were designed based on FE results. And to verify the structural design, full scale structural test was conducted according to IEC 61400-2 under identical loading conditions of FE analysis. Finally, the force-deflection and local strain behavior of composite blade were evaluated.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• 제11권6호
• /
• pp.11-25
• /
• 2008

In broad agreement on the need for forests in the city, researches on the urban forest are being actively carried out. Nonetheless, since these researches focus on functional usage within living spaces, finding methods for creation of urban forests and technical solutions have remained chief issues as a consequence. This paper, which attempts to historically examine the properties of the urban forest within living space, has the characteristics of researching basic angles for approaching the creation of contemporary urban forests. For this purpose Joseon Dynasty genre paintings, which represent living conditions of Joseon era, have been decided as theme of the paper. Particularly the focus was limited to genre paintings depicting trees, giving phenomenal observations. As a result, some remarkable characteristics emerged as functional urban forest, symbolic urban forest, topological urban forest, and appreciative urban forest. Urban forest within living space mainly appear as functional, showing an even distribution in small numbers rather than gathering in large groups. The following can be inferred regarding this and related to the setting up of the scope of, and creating of, contemporary urban forest : First, from the viewpoint of urban forest creation there is a need to study more subdivided and refined types of the urban forest and to actually realize these types. Second, from the viewpoint of urban forest usage, one needs to approach existing forests, ranging from small-scale including invididual trees, to mid-, large-, and super scale, as urban forests. In this, a network of major trees, and thereby a matrix of all trees formed by that network, will be formed. Third, from the viewpoint of urban forest improvement, approaches need to be based on planting trees in even distribution across the whole city.

• Journal of Korea Water Resources Association
• /
• 제44권10호
• /
• pp.809-817
• /
• 2011

We analyzed various cost components for approximately 40 small-scale island desalination plants operated by K-water. A significant factor affecting desalination cost was found, and we proposed a way to reduce desalination costs. All plants considered were reverse osmosis (RO) facilities. TDS concentrations of feed water varied from less than 1,000 mg/L (practically considered freshwater) to over 30,000 mg/L (nearly seawater). Analysis of desalination costs from 2005 to 2009 indicated that maintenance, labor, and energy were the three biggest components that accounted for 50.6%, 36.9% and 7.8%, respectively. It was well known that TDS of feed water directly affected energy needed for RO process. In this study we found that maintenance cost was also directly related to feed water TDS. This finding indicated that lowering feed water TDS might result in significant desalination cost reduction.