• Structural Engineering and Mechanics
• /
• v.36 no.4
• /
• pp.481-497
• /
• 2010

The shaking table tests were conducted on two small-scale models (Model 1 and Model 2) to examine the earthquake-induced damage of a concrete gravity dam, which has been planned for the construction with the recommendation of the peak ground acceleration of the maximum credible earthquake of 0.42 g. This study deals with the numerical simulation of shaking table tests for two smallscale dam models. The plastic damage constitutive model is used to simulate the crack/damage behavior of the bentonite-concrete mixture material. The numerical results of the maximum failure acceleration and the crack/damage propagation are compared with experimental results. Numerical results of Model 1 showed similar crack/damage propagation pattern with experimental results, while for Model 2 the similar pattern was obtained by considering the modulus of elasticity of the first and second natural frequencies. The crack/damage initiated at the changing point in the downstream side and then propagated toward the upstream side. Crack/damage accumulation occurred in the neck area at acceleration amplitudes of around 0.55 g~0.60 g and 0.65 g~0.675 g for Model 1 and Model 2, respectively.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.29 no.1
• /
• pp.103-122
• /
• 2003

Recently, many graduate schools related to Cosmetic & Beauty have established, and it is very advisable. However, the following the curriculum or the teaching staff has to be made up well for making a substantial graduate school, and it will contribute largely toward to Cosmetic & Beauty industry. If it is used like a tool for only increasing the quorum of student, it is not a help to Cosmetic & Beauty industry even though many Cosmetic & Beauty courses in the graduate schools are established. The government and the industrial circles have to give thought and support to develop a university. Then special workers who train in this part will be a help to grow Cosmetic & Beauty industry. Hereafter, Cosmetic & Beauty industry is a big field of industry after medical supplies in the fine chemistry industry when we take the scale of industry and the national competitiveness into consideration. And Cosmetic & Beauty industry is a competitive field of industry with a small investment contrary to medical supplies. However, there are few educational institutions for special workers through the college of pharmacy in Cosmetic & Beauty contrary to medical supplies. Also, there is no position for managing the growth of Cosmetic & Beauty industry in the government agencies. At this point of time, it is very desirable situation that the graduate school related to Cosmetic & Beauty is established lately, and we hope that it is an opportunity for the growth of Cosmetic & Beauty industry through the interests of the university, the government, the industrial circles, and so on.

• International Journal of Fluid Machinery and Systems
• /
• v.3 no.1
• /
• pp.58-66
• /
• 2010

A steam control valve is used to control the flow from the steam generator to the steam turbine in thermal and nuclear power plants. During startup and shutdown of the plant, the steam control valve is operated under a partial flow conditions. In such conditions, the valve opening is small and the pressure deference across the valve is large. As a result, the flow downstream of the valve is composed of separated unsteady transonic jets. Such flow patterns often cause undesirable large unsteady fluid force on the valve head and downstream pipe system. In the present study, various flow patterns are investigated in order to understand the characteristics of the unsteady flow around the valve. Experiments are carried out with simplified two-dimensional valve models. Two-dimensional unsteady flow simulations are conducted in order to understand the experimental results in detail. Scale effects on the flow characteristics are also examined. Results show three types of oscillating flow pattern and three types of static flow patterns.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.20-29
• /
• 2018

The dynamic characteristics of power systems become more and more complex because of the integration of large-scale wind power, which needs appropriate control strategy to guarantee stable operation. With wide area measurement system(WAMS) creating conditions for realizing realt-ime transient stability analysis, a new coordinated control strategy for power system transient stability control based on phase-plane trajectory was proposed. When the outputs of the wind farms change, the proposed control method is capable of selecting optimal generators to balance the deviation of wind power and prevent transient instability. With small disturbance on the base operating point, the coordinated sensitivity of each synchronous generator is obtained. Then the priority matrix can be formed by sorting the coordinated sensitivity in ascending order. Based on the real-time output change of wind farm, coordinated generators can be selected to accomplish the coordinated control with wind farms. The results in New England 10-genrator 39-bus system validate the effectiveness and superiority of the proposed coordinated control strategy.

• Journal of Biosystems Engineering
• /
• v.43 no.4
• /
• pp.386-393
• /
• 2018

Purpose: Chicken cutting is done manually, which is inefficient, unhygienic, and carries a high accident risk during processing. This study develops and evaluates an automatic chicken cutting machine that suits small-scale workplaces. Methods: This study developed an automatic chicken cutting machine equipped with four traverse blades and two longitudinal blades. An experiment was conducted with various blade rotating speeds and tray feed rates to evaluate the machine's performance. The chicken loss rate and chicken piece weights were measured to calculate the coefficient of variation (CV), thereby determining processing uniformity. Results: The optimal cutting conditions with the smallest chicken loss rate were 0.05 m/s tray feed speed and 18.8 m/s and 16.4 m/s for the traverse and longitudinal blades, respectively. The processing ran at 55.3 chickens per hour and the chicken pieces were more uniform when using the device than for hand-work processed pieces. Conclusions: The loss rate increased in proportion to the cutting-blade rotation speed due to the high cutting rate in meat. The loss rate also increased as the tray feed speed slowed because the cutting blade pushed the chicken meat. The tray feed speed should be increased to improve the amount processed per hour.

• Molecules and Cells
• /
• v.42 no.2
• /
• pp.161-165
• /
• 2019

Non-small cell lung cancer (NSCLC) is the leading cause of cancer-related deaths worldwide and has high rates of metastasis. Transforming growth factor beta-inducible protein (TGFBI) is an extracellular matrix component involved in tumour growth and metastasis. However, the exact role of TGFBI in NSCLC remains controversial. Gene silencing via DNA methylation of the promoter region is common in lung tumorigenesis and could thus be used for the development of molecular biomarkers. We analysed the methylation status of the TGFBI promoter in 138 NSCLC specimens via methylation-specific PCR and evaluated the correlation between TGFBI methylation and patient survival. TGFBI promoter methylation was detected in 25 (18.1%) of the tumours and was demonstrated to be associated with gene silencing. We observed no statistical correlation between TGFBI methylation and clinicopathological characteristics. Univariate and multivariate analyses showed that TGFBI methylation is significantly associated with poor survival outcomes in adenocarcinoma cases (adjusted hazard ratio = 2.88, 95% confidence interval = 1.19-6.99, P = 0.019), but not in squamous cell cases. Our findings suggest that methylation in the TGFBI promoter may be associated with pathogenesis of NSCLC and can be used as a predictive marker for lung adenocarcinoma prognosis. Further large-scale studies are needed to confirm these findings.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.58.2-58.2
• /
• 2018

Theoretically, the magnetic helicity transport flux through the solar surface into the upper atmosphere can be estimated indefinitely precisely by magnetic field footpoint tracking if the observational resolution is infinitely fine, even with magnetic flux emergence or submergence. In reality, the temporal and spatial resolutions of observations are limited. When magnetic flux emerging or submerging, the footpoint velocity goes to infinity and the normal magnetic field vanishes at the polarity inversion line. A finite observational resolution thus generates a blackout area in helicity flux estimation near the polarity inversion line. It is questioned how much magnetic helicity is underestimated with a footpoint tracking method due to the absence of information in the blackout area. We adopt the analytical models of Gold-Hoyle and Lundquist force-free flux ropes and let them emerging from below the solar surface. The observation and the helicity integration can start at different emerging stages of the flux rope, i.e., the photospheric plane initially cuts the flux rope at different levels. We calculate the magnetic helicity of the flux rope below the photospheric level, which is eventually to emerge, except the helicity hidden in the region to be swept by the blackout area with different widths. Our calculation suggests that the error in the integrated helicity flux estimate is about half of the real value or even larger when small scale magnetic structures emerge into the solar atmosphere.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2230-2240
• /
• 2011

This study was performed to determine the depression and its association with sleep quality, occupational stress and fatigue among small-scale manufacturing male workers. The self-administered questionnaires were given to 856 workers under 50 members of manufacturing industries during the period from April 1st to June 30th, 2010. As a results, the distribution of depression group(21 point and over at CES-D score) among all subjects were 44.3%, and it was positively correlated with occupational stress, fatigue and quality of sleep. With the analysis of covariance structure, occupational stress(KOSS) was more influential on the depression than quality of sleep and fatigue. It was found to have the inter-relational effects that the higher the occupational stress(KOSS) and fatigue(MFS), and the lower the quality of sleep, the higher the depression. Thus the effective strategy for depression reduction among workers requires the efforts to improve the work environment and job contents.

• Korean small business review
• /
• v.43 no.1
• /
• pp.165-186
• /
• 2021

Startups are undergoing a change throughout the growth process of startups that appear in existing studies as they move away from the existing B2B or B2C frame and expand their target customer groups to O2O, C2C. In this regard, a new type of startup known as unicorns, a unicorn which has grown rapidly in a short period of time, is being created by successfully attracting government support and external investment in recognition of the potential value of the startup. This study examined the relationship between investment attraction and growth after founding for five representative unicorns in the U.S. and Korea. As a result, it was found that private investment in Korea is passive and defensive, and is attracted after the Series A stage, compared to the U.S., where the growth potential of the startup ecosystem is positively evaluated. In addition, it found that government's support policy throughout the startup's growth process is an abstract and comprehensive policy focusing on initial funding for startups. Therefore, it was suggested that the scope of government policies should be expanded to forster startups as unicorns, and that it is necessary to establish and implement differentiated support policies for each growth of the scale-up of startups. This study is significant in that it presented the criteria for the growth stage and support of startups as well as policy support for scale-up through practical case analysis of unicorns.

• Atmosphere
• /
• v.26 no.4
• /
• pp.523-540
• /
• 2016

The effects of satellite observations on large-scale atmospheric circulations in the reanalysis data are investigated by comparing the latest Japanese Meteorological Association's reanalysis data (JRA-55) and its family data, JRA-55 Conventional (JRA-55C). The latter is identical to the former except that satellite observations are excluded during the data assimilation process. Only conventional datasets are assimilated in JRA-55C. A simple comparison revealed a considerable difference in temperature and zonal wind fields in both the stratosphere and troposphere. Such differences are particularly large in the Southern Hemisphere and whole stratosphere where conventional ground-based measurements are limited. The effects of satellite observations on the zonal-mean tropospheric circulations are further examined in terms of the Hadley cell, eddy-driven jet, and mid-latitude storm tracks. In both hemispheres, JRA-55C exhibits slightly weaker and narrower Hadley cell than JRA-55. This is consistent with a weaker diabatic heating in JRA-55C. The eddy-driven jet shows a small difference in its latitudinal location only in the Southern Hemisphere. Likewise, while the Northern-Hemisphere storm tracks are quantitatively similar in the two datasets, Southern-Hemisphere storm tracks are relatively weaker in JRA-55C than in JRA-55. Their difference is comparable to the uncertainty between reanalysis datasets, indicating that satellite data assimilation could yield significant corrections in the zonal-mean circulation in the Southern Hemisphere.