• 제목/요약/키워드: small-displacement-movement

검색결과 37건 처리시간 0.025초

Caudal and epidural blocks in infants and small children: historical perspective and ultrasound-guided approaches

  • Kil, Hae Keum
    • Korean Journal of Anesthesiology
    • /
    • 제71권6호
    • /
    • pp.430-439
    • /
    • 2018
  • In infants and small children, ultrasound (US) guidance provides ample anatomical information to perform neuraxial blocks. We can measure the distance from the skin to the epidural space in the US image and can refer to it during needle insertion. We may also visualize the needle or a catheter during real-time US-guided epidural catheterization. In cases where direct needle or catheter visualization is difficult, US allows predicting successful puncture and catheterization using surrogate markers, such as dura mater displacement, epidural space widening due to drug injection, or mass movement of the drug within the caudal space. Although many experienced anesthesiologists still prefer to use conventional techniques, prospective randomized controlled trials using US guidance are providing increasing evidence of its advantages. The use of US-guided regional block will gradually become widespread in infants and children.

AE/MS 모니터링시스템개발과 적용연구 (Development of AE/MS monitoring system and its application)

  • 천대성;정용복;박찬;신중호;장현익
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
    • /
    • pp.199-210
    • /
    • 2008
  • Acoustic emission(AE)/Microseimsic(MS) activities are low-energy seismic events associated with a sudden inelastic deformation such as the sudden movement of existing fractures, the generation of new fractures or the propagation of fractures. These events rapidly increase before major failure and happen within a given rock volume and radiate detectable seismic waves. The main difference between AE and MS signals is that the seismic motion frequencies of AE signals are higher than those of MS signals. As the failure of geotechnical structures usually happens as a high velocity and small displacement, it is not easy to determine the precursor and initiation stress level of failure in displacement detection method. To overcome this problem, AE/MS techniques for detection of structure failure and damage have recently adopt in civil engineering. In this study, AE/MS monitoring system, which consist of sensor, data acquisition and operation program, is constructed with domestic technology. To verify and optimize the developed system, we are now carrying out the field application at an underground research laboratory and the developed AE/MS monitoring will be used in detecting of seismic events with various scales.

  • PDF

Sustainable Surface Deformation Related with 2006 Augustine Volcano Eruption in Alaska Measured Using GPS and InSAR Techniques

  • Lee, Seulki;Kim, Sukyung;Lee, Changwook
    • 한국측량학회지
    • /
    • 제34권4호
    • /
    • pp.357-372
    • /
    • 2016
  • Augustine volcano, located along the Aleutian Arc, is one of the most active volcanoes in Alaska and nearby islands, with seven eruptions occurring between 1812 and 2006. This study monitored the surface displacement before and after the most recent 2006 eruption. For analysis, we conducted a time-series analysis on data observed at the permanent GPS(Global Positioning System) observation stations in Augustine Island between 2005 and 2011. According to the surface displacement analysis results based on GPS data, the movement of the surface inflation at the average speed of 2.3 cm/year three months prior to the eruption has been clearly observed, with the post-eruption surface deflation at the speed of 1.6 cm/year. To compare surface displacements measurement by GPS observation, ENVISAT(Environmental satellite) radar satellite data were collected between 2003 and 2010 and processed the SBAS(Small Baseline Subset) method, one of the time-series analysis techniques using multiple InSAR(Interferometric Synthetic Aperture Radar) data sets. This result represents 0.97 correlation value between GPS and InSAR time-series surface displacements. This research has been completed precise surface deformation using GPS and time-series InSAR methods for a detection of precursor symptom on Augustine volcano.

울산단층북부 갈곡리 치실 지점의 마지막 단층 운동시기 결정 (Determination of the latest fault movement by trench survey at Galgok-Chisil site in the northern Ulsan fault system)

  • 최원학;장천중;정상대영;전중죽연
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2005년도 학술발표회 논문집
    • /
    • pp.11-17
    • /
    • 2005
  • Along the Ulsan Fault System, many Quaternary faults have been reported and investigated with outcrop observation and trench excavation to clarify the neotectonic movements and fault parameters such as length, displacement, slip rate and recurrence interval. In the northern part of the Ulsan fault system, we have interpreted small scale(1:10,000) aerial photographs and extracted lineaments by geomophological features to select trench site. After precise field survey and tracing for lineaments, two trench sites at Galgokri, Gyeongju were selected on the lineament to elucidate the fault movement history. One is successful in finding faults but the other is not. In the Galgok-Chisil trench(3m(w) x 1.5m(d) x 10m(l)), very closed two Quaternary faults cut the alluvial deposits of which age shows about 10-3ka. More than three times of fault movements can be inferred by geologic structures and C-14 dating. Repeatedly fault movements had been occurred before 10 ka, between 10ka-4.9 ka, between 4.9-1.4 ka at Galgok-Chisil trench section.

  • PDF

압전벤더를 이용한 소형 다족 로봇 구동원 (The Multi-legged Small Sized Robot Drive using Piezoelectric Benders)

  • 박종만;김영현;정원찬;류정민
    • 한국항행학회논문지
    • /
    • 제24권5호
    • /
    • pp.444-449
    • /
    • 2020
  • 본 연구에서는 구조가 간단하고 소형화 제작이 용이한 소형보행 로봇용 구동원을 제안한다. 두 개의 직교방향 모멘트를 핀조인트 구조의 다리에서 회전벡터로 변환하여 이동표면에 타원궤적이 발생하도록 설계하였고, 다른 구동원 대비 효율성과 에너지 밀도가 높은 압전 세라믹을 활용하여 압전벤더 액츄에어터를 제작하였다. 또한 사용된 압전 벤더 액츄에이터는 유한요소해석을 통한 자체 무게대비 최대의 출력을 낼 수 있도록 재질 및 형상을 최적화하였다. 두 개의 다리로 구성된 단위 액츄에이터는 모듈화 되어 여러 개의 액츄에이터로 결합이 가능하고 매운 빠른 속도로 이동 및 거친 지형에서도 운용이 가능하다. 실험결과로 T자형 로봇 액츄에이터의 다양한 속도 (2 mm/sec.에서 266 mm/sec까지)와 운송능력(최대 10 g에서 50 mm/s까지)을 확인 하였다.

보강토옹벽의 배부름에 관한 실험적 연구 (Bulging of Reinforced Retaining Walls)

  • 주재우;박종범;나현호
    • 한국지반신소재학회논문집
    • /
    • 제10권2호
    • /
    • pp.45-53
    • /
    • 2011
  • 최근 보강토 옹벽은 점차 콘크리트옹벽을 대체하는 안정화된 공법으로 자리 잡아가고 있다. 그러나, 보강재로서 신장성보강재(Extensible reinforcement)를 사용할 경우 보강토 옹벽의 전면벽에서 배부름(Bulging) 현상이 발생할 수 있다. 보강토옹벽의 배부름(Bulging)은 임의의 블록 높이에서 그 블록의 상단 및 하단 블록이 설계상의 상대적인 위치를 확보하지 못하는 현상이다. 이는 보강재가 인장력을 발휘하기 위해서는 어느 정도 변형이 필요하기 때문에 이에 대한 설계상의 검토가 필요하다. 따라서 본 연구에서는 알루미늄 봉을 이용하는 소형모형실험을 통해서 보강재의 신장특성이 보강토 옹벽거동에 어떤 영향을 미치는지 연구하였다. 보강재는 비신장성 보강재로서 창호지와 신장성 보강재로서 멤브레인을 이용하였다. 실험결과로부터 보강재의 강성은 보강토옹벽의 변위형태에 많은 영향을 미치는 인자임을 알 수 있었으며, 전반적으로 보강재의 강성이 증가함에 따라 최대수평변위의 발생지점이 벽체 상부로 이동하는 경향을 보이고 있다.

평행봉 Belle 기술동작의 운동학적 분석 (A Kinematical Analysis of Belle Motion on Parallel Bars)

  • 공태웅
    • 한국운동역학회지
    • /
    • 제15권4호
    • /
    • pp.43-53
    • /
    • 2005
  • This study is to define how the difference of athletic change influence on the last regrasp after somersault in Belle movement of parallel bars. For his study, the following conclusion was produced by analysis of athletic change by means of three dimensional visual image in three athlete of nation. 1. As the picture of S1, there are total used time(2.01 sec), S3(2.17 sec) and S2(2.19 sec). In case of a short needed time, it is difficult for them to perform the remaining movement of the vertical elevating flight easily and comfortably, it is judged as performing the small movement with restrict swing. 2 In the change of body center sped by each event, it is calculated as $-89.1^{\circ}$ the narrowest in S1, $-81.96^{\circ}$ the widest and then $86.34^{\circ}$ in S3. In E3 event, average compound speed is 4.07m/s, S2 showed the fastest speed of 4.14m/s whereas S1 the narrowest angle of 3.95m/s. 3. A shoulder joint and coxa are the period of mention in E3. In E4 which was pointed out the longest vertical distance, S2 that is indicated the highest vertical height as the period of detach in parallel bars. showed -3.91m. This is regarded as a preparatory movement for dynamic performance after using effectively elastic movement of shoulder joint and coxa while easily going up with turning back movement. In the 5th phrase, long airborne time and vertical change position is showed as the start while regrasping securely air flight movement from high position. 4. In E5, a long flight time and a long vertical displacement were shown as the regrasp after somersault efficiently in high position with stability from the point of the highest peak of the center of the body. Especially, S2 is marked as a little bit long position, while S1 is reversely indicated as performing somersault and unstable motion in a low position. 5. In E3, at the point of the largest extension of the shoulder joint and hip joint the shoulder joint is largely marked in $182^{\circ}$ and the hip point $182^{\circ}$ in S2. The shoulder joint is marked at the smallest angle in $177^{\circ}$ and the hip point $176^{\circ}$ in S1. And S1 is being judged by its performance of the less self - confident motion with lessening a breath of swing. S2 makes the most use of flexion and extension of the shoulder joint and the hip joint effectively. It was performed greatly with swinging and dropping the rotary movement and the rotary inertia naturally. 6. In E6, as the point of regrasp of the upper arm in parallel bars it is recognized by the that of components of vertical and horizontal velocity stably. During this study, the insufficient thing and the study on the parallel bars at a real game later are more activated than now. If it is really used as the basic materials by means of Belle Picked Study of Super E level after Bell movement, you may perceive the technique movement previously and perform without difficulty. Especially, such technique as crucifix is quite advantageous for oriental people thanks to small body shape condition. In conclusion we will nicely prepare for our suitable environment to gradually lessen trials and errors by analyzing and studying kinematically this movement.

선미관 밀봉장치 개발에 관한 연구 (I) - 맆 시일을 중심으로- (A Study on the Development of Ship's Stern Tube Sealing System(I) -Based on Lip Seals-)

  • 김영식;전효중;왕지석;정재현
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제15권4호
    • /
    • pp.29-45
    • /
    • 1991
  • Lip type stern tube sealing systems have used in almost all the middle or large ships which are being constructed in these days. It seems that the pressure fluctuation of the seal ring interspace, the cross-section profile and the materials quality of the seal rings have great effects on the sealing fuction of this sealing system. In this paper, the mechanical movement of lip seal ring which plays the most important role in stern tube sealing system and the possibility of leakage caused by pressure fluctuation are studied by theory and experiment. Using the finite element method for the axi-symetric object which receives the torsional load, the displacement and stress analysis of the seal rings, and also the possibility of crack occurance is checked by theoretical analysis. If the force which seal ring lip periphery receives is too small, there will be the possibility of leakage caused by the pressure fluctuation of the seal ring interspace, and if this force is too large, the frictional force between the seal ring and the liner will become problematical. The possibility of leakage caused by hardening of seal ring materials and creep phenomena of tested seal rings are also examined. The trial seal rings were designed and manufactured using the program of displacement and stress analysis developed in this study and the experimental apparatus to test the trial seal rings was also designed and manufactured. This trial seal rings were fitted in the experimental apparatus which was made in the same form as an actual stern tube. The one side of this apparatus was filled with sea water and the other side of it was filled with the lubricating oil. The leakage of oil and sea water was checked and the temperature was measured, rotating the propeller shaft at the constant velocity by D.C. motor. It was proved that the trial seal rings made in Viton rubber functioned excellenty but the trial seal rings made in N.B.R. rubber had problem in its durability.

  • PDF

정상인과 하지장애자의 보행형태에 대한 운동학적 분석 (A Kinematic Analysis of Gait Patterns between the Normal Men and the Lower Limb Handicapped)

  • 김무영
    • 한국운동역학회지
    • /
    • 제13권3호
    • /
    • pp.163-180
    • /
    • 2003
  • This paper aims at collecting the guantitative data of kenematic variables by analysing the gait patterns of the normal adult men and the handicapped. The gait motions were taped with 4 video cameras, the cinematographic analyses were performed by the DLT technique of three dimensional image treatment. The following results were obtained in the analysis of the variables: 1. The ratio of stance time and swing time did not show any significant difference in the groups of the normal men and the handicapped when both foot of the former and the right feet of the latter were compared. The stride peeriod time of these two groups were 1.12 and 1.11 second, respectively. 2. In the handicapped group, the step width was wider, the step length and stride length were shorter, and especially, the step length of the right foot was shorter, 3. The small vertical displacement of left toes of the handicapped group showed that the heal contact and the left midstance are almost simultaneous. 4. The two groups have almost the same horizontal displacement of the center of gravity and the same vertical rate of extension. In view of the velocity of the center of gravity the normal adults showed the constant speed of movement. However, the handicapped adults were reduced from the right midstance to the right toe-off. 5. The handicapped showed prominently low angle on the left toe-off in the ankle joint angle, they also had the tendency to walk in the patterns of extended knee in the knee joint angle. Both the handicapped and the normal had the hyperextension on the toe-off in the hip joint angle. In the back and front angle of body, both showed the slightly back-sided walking positions. 6. Both groups had the abduction of both feet in foot placement angle, but the handicapped did not show serious abduction of left midstance.

AE와 MS 이벤트를 이용한 계측기술 (Monitoring Technique using Acoustic Emission and Microseismic Event)

  • 천대성;정용복;박철환;신중호;박의섭
    • 터널과지하공간
    • /
    • 제18권1호
    • /
    • pp.1-9
    • /
    • 2008
  • 미소파괴음(Acoustic Emission, AE)과 미소지진음(Microseismic event, MS event)은 응력의 재분배에 의한 균열이 생성될 때 나오는, 순간적인 에너지 방출에 의한 탄성파이다. AE/MS 이벤트는 일반적으로 대규모의 파괴에 앞서 그 발생이 현저해지는 경향이 있다. 이들은 계측영역의 주파수 대역에 따라 구분되며, MS이벤트에 비해 상대적으로 고주파의 AE 신호는 보다 미세한 파괴를 검출할 수 있다. 일반적으로 암반구조물은 파괴되기까지 작은 변형이 발생하여 종래에 사용되고 있는 변위계측으로는 그 전조현상을 포착하기 어렵기 때문에 국부적인 파괴나 갑작스러운 파괴에 대한 사전예측이 어려운 현실이다. 그러나 AE/MS 이벤트의 파형을 측정할 수 있는 경우 암반구조물의 파괴를 사전에 예측할 수 있으며, 초동이 명확한 경우 미세한 파괴위치지점과 함께 파괴메커니즘의 규명도 가능하다. 본 보고에서는 AE/MS 이벤트에 대한 기본이론과 함께 이들 활용한 계측기술 개발현황과 적용사례 등을 소개한다.