• 대한기계학회논문집A
• /
• 제38권6호
• /
• pp.609-617
• /
• 2014

풍력터빈 블레이드의 가변 피치제어는 풍력발전기의 과풍속 영역 설계에 있어 중요한 요소로 알려져 있으나 원가문제 때문에 소형 풍력터빈에는 적용되지 못하고 실속제어가 많이 적용되고 있다. 하지만, 블레이드 주변의 난류 때문에 설계된 실속이 구현되지 않는 실속지연 현상이 종종 발생되고, 이에 따른 풍력 블레이드의 과회전과 발전기의 과출력 위험이 발생하고 있다. 이에 따라 블레이드에서 발생되는 공력으로 피치가 변하고 스프링의 복원력으로 복귀되는 수동형 피치제어 모듈이 주목 받고 있다. 본 연구에서는 회전하는 블레이드의 익형에서 발생되는 양력과 항력을 이용하여 회전면으로 작용되는 토크와 블레이드의 Flap 방향으로 작용되는 추력을 계산하는 방법을 제시하고, 이러한 힘들의 크기를 여러 가지 익형에 대해 비교하였으며, 블레이드의 피치모멘트를 정량적으로 산출하여 수동 피치제어 모듈의 설계자료로 활용될 수 있도록 하였다.

• Wind and Structures
• /
• 제25권5호
• /
• pp.459-474
• /
• 2017

In this study an analytical expression is derived for the natural frequency of the wind turbine towers supported on flexible foundation. The derivation is based on a Euler-Bernoulli beam model where the foundation is represented by a stiffness matrix. Previously the natural frequency of such a model is obtained from numerical or empirical method. The new expression is based on pure physical parameters and thus can be used for a quick assessment of the natural frequencies of both the real turbines and the small-scale models. Furthermore, a relationship between the diagonal and non-diagonal element in the stiffness matrix is introduced, so that the foundation stiffness can be obtained from either the p-y analysis or the loading test. The results of the proposed expression are compared with the measured frequencies of six real or model turbines reported in the literature. The comparison shows that the proposed analytical expression predicts the natural frequency with reasonable accuracy. For two of the model turbines, some errors were observed which might be attributed to the difference between the dynamic and static modulus of saturated soils. The proposed analytical solution is quite simple to use, and it is shown to be more reasonable than the analytical and the empirical formulas available in the literature.

• 산업기술연구
• /
• 제26권A호
• /
• pp.75-80
• /
• 2006

A vibration monitoring is performed on a 1kW class stand alone wind turbine(W/T). When a W/T model is developed, general performance under various wind condition should be verified to introduce the product in the market. Especially, vibration characteristics within operating speed range are very important in the aspect of structural stability as well as generator's electrical efficiency. This paper examines the vibration performance of a home made 1kW W/T. Various data of the W/T model are acquired in real time using a remote vibration monitoring system installed in Daekwanryung test site. Vibration stability of the W/T structure is diagnosed based upon the data and the result is used to estimate the applicability of the W/T model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.773-774
• /
• 2006

Nowadays, the global interests are concentrated on the preserving of the clean environment, and the diminishing of the dependence on the fossil energy, and among the possible alternative energies, the wind turbine generating system is considered to be the best suited to produce high efficiency energy, without affecting the natural environment. The permanent magnet generators were been used for the wind power generating, for long time, with continuous efforts to improve the generating efficiency. And the latest trend on it is to develop an AFPM(Axial Flux Permanent Magnet)type, which is composed in the structure of rotor and stator shaped in the disc forms, and the direction of the flux at the air gap runs in parallel to the shaft. This thesis is on the study concerning with the analysis of the characteristics of the 5 kW at 300rpm direct drive AFPM generator which is suitable for the small scale wind turbine generating system. In it, the Electro-magnetically Coreless AFPM was been analyzed, the prototype generators been made, concentrated on interpreting the characteristics of the power output, and verifying it through the theoretical study and practical tests.

• Advances in Energy Research
• /
• 제5권2호
• /
• pp.129-145
• /
• 2017

In this study, the use of a micro gas turbine system using biogas to supply heating, cooling and electricity loads of a rural building located in rural area around Tehran has been studied. Initially, the amount of energy needed by the farmhouse was calculated and then the number of needed microturbines was determined. Accordingly, the amount of substances entering biogas digester as well as tank volume were determined. The results of this study showed that village house loads including electrical, heating and cooling and hot water loads can be supplied by using a microturbine with a nominal power of 30 kW and $33.5m^3/day$ of biogas. Digester tank and reservoir tank volumes are $67m^3$ and $31.2m^3$, respectively. The cost of electricity produced by this system is 0.446 US$/kWh. For rural area in Iran, this system is not compatible with micro gas turbine and IC engine system use urban natural gas due to low price of natural gas in Iran, but it can be compatible by wind turbine, photovoltaic and hybrid system (wind turbine& photovoltaic) systems.

• 한국항행학회논문지
• /
• 제25권3호
• /
• pp.236-241
• /
• 2021

본 논문에서는 해상에 설치되는 풍력발전기에 의한 해상 관제 레이더의 간섭 여부를 분석하는 방법론을 제시하고, 군산항 인근 해역에 설치되는 소수의 풍력발전기에 의한 해상 관제 레이더의 간섭 여부를 분석하였다. 레이더 간섭 분석은 ray 기반의 전자기 해석 프로그램을 이용하였으며, 고도 정보를 포함하는 수치지형도, 풍력발전기 도면 및 파도를 포함하는 해수면을 전자기 해석 프로그램에 맞게 변환하여 주변 지형과 풍력발전기에 의한 영향을 반영하였다. 분석 결과 대규모 풍력발전단지가 아닌 소수의 풍력발전기의 설치는 해상 관제 레이더의 운용에 심각한 영향이 없는 것으로 분석된다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권1호
• /
• pp.31-39
• /
• 2013

This paper presents small signal stability analysis of a doubly fed induction generator (DFIG) based wind farm including series dynamic braking resistor (SDBR) connected at the stator side. A detailed mathematical model of wind turbine, DFIG machine and converters and SDBR is presented in this paper to derive the complete dynamic equations of the studied system. Small signal stability of this system is carried out by modal and sensitivity analysis, participation factors and eigenvalue analysis. Finally, this paper presents an analysis of the dynamic behavior of DFIG based wind farm under voltage dip condition with and without SDBR.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.400-403
• /
• 2007

소형 풍력터빈 설계 시 고려해야 할 익형의 선택, 익형의 붙임각 및 Solidity 등이 터빈의 성능에 미치는 영향을 고찰하였다. 한 개의 익형에 대한 공력계수를 이용하여 수학적 모델링을 통하여 최적 붙임각을 예측하여 경향을 파악하였다. 받음각에 따른 익형의 공력특성을 CFD 기법으로 파악한 후 5개의 Blade를 갖는 Turbine의 성능을 익형의 붙임각에 따라 파악하여 최대 성능을 갖는 붙임각을 최종 산출하였다. 익형 선정시 받음각에 대한 양력/항력 곡선을 이동시키는 캠버 익형의 기능보다는 항력 대양력의 비(L/D) 가 최대인 익형을 선정하는 것이 더욱 중요하며, Blade수가 적을수록 Torque의 양은 증가하고 Blade가 6이상이변 효율이 급격히 감소함을 알 수 있다.

• 전기학회논문지
• /
• 제65권3호
• /
• pp.371-381
• /
• 2016

This paper presents a study on reliability assessment and new contribution function development of power system including Wind Turbine Generator(WTG) combined with Battery Energy Storage System(BESS). This paper develops and proposes new reliability contribution function of BESS installed at wind farms. The methodology of reliability assessment, using Monte Carlo Simulation(MCS) method to simulate sample state duration, is proposed in detail. Forced Outage Rate(FOR) considered probabilistic approach for conventional generators is modelled in this paper. The penetration of large wind power can make risk to power system adequacy, quality and stability. Although the fluctuation of wind power, BESS installed at wind farms may smooth the wind power fluctuation. Using small size system as similar as Jeju island power system, a case study of reliability evaluation and new proposed contribution function of power system containing WTG combined with BESS is demonstrated in this paper, which would contributes to BESS reliability contribution and assessment tools of actual power system in future.

• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.288-294
• /
• 2010

In recent years, wind energy has been the world's fastest growing source of energy. This paper describes the structural design and analysis of composite blade for 2 kW-level HAWT (horizontal axis wind turbine). The aerodynamic design and force, which are required to design and analyze a composite blade structurally, are calculated through BEMT(blade element momentum theory) implemented in public code PROPID. To obtain the equivalent material properties of filament wound composite blades, the rule-of-mixture is applied using the basic material properties of fiber and matrix, respectively. Lay-up sequence, ply thickness and ply angle are designed to satisfy the loading conditions. Structural analysis by using commercial software ABAQUS is performed to compute the displacement and strength ratio of filament wound composite blades.