• 한국광학회지
• /
• 제26권4호
• /
• pp.195-202
• /
• 2015

기층의 잔류 이방성에 영향을 받지 않고 러빙된 폴리이미드 배향막의 초미세 광학 이방성을 정밀하게 측정할 수 있는 반사형 타원계를 개발하고 러빙의 세기를 달리하여 제작한 배향막의 광학이방성을 이 반사형 타원계를 사용하여 측정, 분석하였다. 투과형 타원계를 사용하여 측정한 리타데이션과 비교하여 개발된 반사형 타원계의 신뢰도 및 광학 이방성의 측정 재현성을 확인하고 배향막의 형성 여부와 배향막의 형성정도를 정량적으로 평가하였다

• 한국항해항만학회지
• /
• 제33권9호
• /
• pp.645-651
• /
• 2009

In this study, a series of laboratory experiments were carried out to investigate the weak reflection of regular and random water waves over a train of protruded permeable shore structures. A cylindrical slit type breakwater and the alternatives are employed and compared for reflecting and transmitting capabilities of incident waves including wave forces. A series of random waves were generated by using the Bretschneider-Mitsuyasu frequency and directional spectrum. Measured spectrum of irregular waves without breakwaters is verified by comparing with those of the input waves generated. Weak reflection is occurred at the breakwater center of the peak frequency. If the row of breakwaters is fixed at three layers and the relative height of breakwater is fixed at 0.6, around 45% of incident wave energy is reflected to offshore. It is also found that the transmission of directional random waves increases as the maximum frequency parameter increases. A very good agreement is observed. Reflection coefficients of permeable submerged breakwaters are less than those of impermeable breakwaters. The upside-down L shape is recommended for a small fishery harbor mooring in terms of reflecting capability and of practical application. The final design was applied to the wharf of a small beach of Seolly, near Namhae at the southeast coast of Korea.

• 산업기술연구
• /
• 제20권A호
• /
• pp.303-309
• /
• 2000

Seismic reflection method is applied to detect shallow location of limestone in Chechon area. The data using hammer source is compared with that of weight drop. Small size hammer and weight-drop are used as energy source and 100Hz geophones are used for data aquisition. Data processing is conducted utilizing the available processing technique of "Geobit", which is seismic data processing software developed by KIGAM. The result of above data processing, the velocity of topsoil layer is 1,250m/sec. The velocity of this area is higher than other area because loading trucks pass this area and make this layer compact. And in limestone area, hammer is proposed to energy source instead of weight drop because the energy propagates the layer very well.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.234-238
• /
• 2001

A lot of researches have been done in teleoperation field. For accurate and reliable teleoperation, force reflection is required so that the master can feel the same force, which is measured at reflection have been applied to most of the master device. Therefore the master can not control the force exerted by the slave robot to the environment. But some tasks such as an insertion with very small tolerance, skewing bolt and so forth, require the force command from the master.

• 한국안전학회지
• /
• 제18권4호
• /
• pp.51-56
• /
• 2003

The goal of this study is to show the way to decrease the noise from air nozzles. The variables of this test are the shapes of air nozzles, air flow rate and the distance between a reflection plate and a nozzle tip. This experiment is aimed to find the most appropriate condition to minimize the noise. These are the results. If diameter ratio is more than 12:8, noise level increases by over 10 dB(A) regradless of the distance between a reflection plate and a nozzle and the existence of a reflection plate. And when $L_2$ of a nozzle is 5mm long, noise level rise relatively highly. So, it is strongly recommended that $L_2$ should be manufactured more than 10mm. The reason for a high intensity noise is that when diameter ratio is more than 12:8, the diameter of a nozzle tip($D_2$) turns small drastically, which increases the air velocity. It is assumed that when the vortes is great around the spots where a nozzle hole is suddenly smaller, great turbulent flow increases much noise.

• 한국콘텐츠학회논문지
• /
• 제22권2호
• /
• pp.294-304
• /
• 2022

본 연구의 목적은 대학 교양강좌를 이용한 자기성찰 기반 인성교육 프로그램의 효과를 살펴보는 것이다. 이를 위하여 수강생 18명을 대상으로 학기 시작과 종료의 시점에 자료를 수집하는 단일 처치집단 사전·사후 설계를 진행하였다. 적은 표본 수에 적합한 통계적 추정을 위해 비모수 검증을 수행하여 자료의 유의미한 평균 변화를 살펴보았는데, 본 프로그램은 대학생들의 자기자비, 삶의 만족도, 정신적 웰빙의 수준을 유의하게 향상시키는 것으로 나타났다. 이상의 결과를 토대로, 자기성찰 기반의 인성교육 교양강좌가 대학생 인성교육으로 유용하게 기능할 수 있음이 논의되었으며 본 연구 결과가 함의하는 바와 제언이 제시되었다.

• 한국해안해양공학회지
• /
• 제13권4호
• /
• pp.263-272
• /
• 2001

최근 우리나라에서는 slit형 케이슨을 적용한 방파제 건설이 시도되고 있다. slit 케이슨 방파제는 수심이 비교적 깊은 해역에 적절하며, 다수의 실험적.이론적 연구가 수행되었다. 본 연구에서는 불규칙파를 적용한 2차원 수리모형실험을 실시하여 종 slit형 케이슨 방파제의 반사특성을 검토하였다. 실험은 단일 유수실과 이중 유수실을 가지는 종 slit형 케이슨 방파제에 대해 유공율, 유수실의 폭 및 slit의 수 등을 달리한 여러 가지 실험안을 설정하여 수행하였다. 실험결과에 의하면, 파형경사가 작을수록 반사율은 크게 나타남을 알 수 있다. 그리고 규칙파를 적용한 기존 연구결과에 의하면 상대유수실 폭 (B/L)이 0.2-0.25 부근에서 최소 반사율을 보였으나, 불규칙파를 적용한 본 연구에서는 B/L$_{s}$ ,=0.13~0.15 범위에서 최소의 반사율을 보였다. 또한 동일한 유공율 조건에서 slit의 폭이 클수록 반사율이 낮게 나타났으며, 전체적으로 단일 유수실보다 이중 유수실의 경우가 소파효과가 우수하였다.

• Smart Structures and Systems
• /
• 제32권4호
• /
• pp.253-266
• /
• 2023

The time-reversal method is employed to improve the ability of pipeline defect detection, and a new approach of identifying the pipeline defect depth is proposed in this research. When the L(0,2) mode ultrasonic guided wave excited through a lead zirconate titinate (PZT) transduce array propagates along the pipeline with a defect, it will interact with the defect and be partially converted to flexural F(n, m) modes and longitudinal L(0,1) mode. Using a receiving PZT array attached axisymmetrically around the pipeline, the L(0,2) reflection signal as well as the mode conversion signals at the defect are obtained. An appropriate rectangle window is used to intercept the L(0,2) reflection signal and the mode conversion signals from the obtained direct detection signals. The intercepted signals are time reversed and re-excited in the pipeline again, result in the guided wave energy focusing on the pipeline defect, the L(0,2) reflection and the L(0,1) mode conversion signals being enhanced to a higher level, especially for the small defect in the early crack stage. Besides the L(0,2) reflection signal, the L(0,1) mode conversion signal also contains useful pipeline defect information. It is possible to identify the pipeline defect depth by monitoring the variation trend of L(0,2) and L(0,1) reflection coefficients. The finite element method (FEM) simulation and experiment results are given in the paper, the enhancement of pipeline defect reflection signals by time-reversal method is obvious, and the way to identify pipeline defect depth is demonstrated to be effective.

• 한국음향학회지
• /
• 제7권4호
• /
• pp.5-12
• /
• 1988

일차 반사음의 최적지연시간과 음장의 Preference 판단에 있어서 다른 민족간의 피험자 사이에 차이가 있는지를 알기 위해, 무향실에서 일차 측방반사음을 시뮬레이션하여 지연시간을 가변하면서 주관 Preference 실험을 하였다. 그 결과 일차 반사음의 최적지연시간은 반사음의 레벨이 직접음의 레벨과 같을때 음원의 자기상관함수(ACF) 의 유효지속시간과 일치하며, 음악 모티브가 다르고, 판단 시리즈가 달라도 음장에 대한 Preference판단에 기본적인 차이가 없는 것을 알았다. 또 하나의 음악 모티프에서 다른 2개의 패세지를 사용하여 Preference실험한 결과, 음악 전체에 대한 ACF의 유효지속시간의 변동이 적음을 알았다. 따라서 일차반사음의 최적지연시간은 음원의 ACF와 반사음의 진폭으로부터 예측할 수 있다.

• 한국전기전자재료학회논문지
• /
• 제30권5호
• /
• pp.325-330
• /
• 2017

We fabricated 1-D and 2-D diffraction gratings of SiOx anti-reflection (AR) film grown on a quartz substrate and integrated them into a c-Si photovoltaic (PV) submodule. The light-trapping effect of the resulting submodules was studied in terms of the oblique optical incident angle, ${\theta}_i$. As the ${\theta}_i$ increased, solar conversion efficiency, ${\eta}$, was improved as expected by the increased optical transmission caused by the grating. For ${\theta}_i{\leq}30^{\circ}$, the relative solar conversion efficiency, ${\Delta}{\eta}$, of a 1-D SiOx (t=300 nm) grating, compared to that of a flat SiOx AR-coated integrated PV submodule, was improved very little, with a small variation of within 2%, but increased markedly for ${\theta}_i{\geq}40^{\circ}$. We observed a change of ${\Delta}{\eta}$ as large as 10.7% and 9.5% for the SiOx grating of period t=800 nm and 1200 nm, respectively. For a 2-D SiOx (t=300 nm) grating integrated PV submodule, however, the optical trapping behavior was similar in terms of ${\theta}_i$ but its variation was small, within ${\pm}1.0%$.