• 제목/요약/키워드: small grain

검색결과 768건 처리시간 0.03초

고체 추진제와 점화기 간 간격에 따른 유동 특성 (Flow Characteristics with Distance between Solid Propellant Grain and Igniter)

  • 강동기;최재성;이형진
    • 한국추진공학회지
    • /
    • 제22권2호
    • /
    • pp.96-107
    • /
    • 2018
  • 고체추진기관 내에 점화기와 추진제 그레인 간격에 따라 화염에 의해 발현되는 내부 유동 형태에 대해 전산유체해석(CFD)를 이용하여 살펴보았다. 실린더형과 슬롯형 추진제 그레인에 대해 실린더형은 간격 1 mm, 3 mm, 5 mm, 슬롯형은 점화기의 화염 분출구가 넓은 간격에 위치한 경우와 좁은 간격에 위치한 경우에 대해 수치 해석을 수행하였다. 실린더형은 간격이 좁을수록 점화기와 추진제 사이에 고압력이 형성되며, 점화기 말단 부근에서 압력 강하 또한 상대적으로 크게 나타났다. 실린더형은 간격에 영향을 받았으나, 슬롯형은 화염 분출구 위치에 관계없이 압력 형태가 유사하게 나타났으며, 실린더형 간격 5 mm와 유사한 결과를 보였다.

화분(花粉)에 의한 한국산(韓國產) 참나무과(科) 계통분류(系統分類) (A Systematic Classification of Korean Fagaceae by the Pollen)

  • 박승용
    • 한국산림과학회지
    • /
    • 제80권2호
    • /
    • pp.151-161
    • /
    • 1991
  • 화분(花粉)의 특징(特徵)으로서 우리나라에서 자라고 있는 참나무과(科)의 분류군(分類群)을 식별(識別)하고자 하였다. 5속(屬) 19종류(種類)의 화분(花粉)에 대(對)하여 광학현미경(光學顯微鏡)과 주사형전자현미경(走査型電子顯微鏡) 관찰(觀察)로서 얻은 결과(結果)는 다음과 같다. 1. 본과(本科)의 화분(花粉)은 4개(個)의 주형(主型)과 4개(個)의 부형(副型)(Quercus)으로 분류(分類)되었다. 1) 너도 밤나무형(型) 2) 밤나무형(型) 3) 돌참나무, 잣밤나무형(型) 4) 참나무형(型) (1) 가시나무부형(副型) (2) 갈참나무부형(副型) (3) 떡갈나무부형(副型) (4) 상수리나무부형(副型) 2. 화분(花粉)의 과립상문(顆粒狀紋)의 형태(形態)는 참나무속(屬)의 각두인편(殼斗鱗片)의 형태분화(形態分化)와 관계(關係)가 깊은 것으로 나타났다. 1) 화분표면(花粉表面)의 균일(均一)한 분기과립상문(分岐顆粒狀紋)은 각두인편(殼斗鱗片)이 동심원상(同心圓狀)으로 배열(配列)하는 형질(形質)과 상응(相應)되었다. 2) 화분표면(花粉表面)에 대소과립(大小顆粒), 단과립(單顆粒)과 괴상과립(塊狀顆粒)등이 혼재(混在)하고 괴상과립상(塊狀顆粒狀)의 소철점(小凸占)이 구형(球型)인 형질(形質)은 단인편상각두(短鱗片狀殼斗) 형질(形質)에 상응(相應)하였다. 3) 화분표면(花粉表面)에 대소과립(大小顆粒), 단과립(單顆粒)과 괴상과립(塊狀顆粒)등이 혼재(混在)하고 괴상과립(塊狀顆粒)의 선단(先端)이 Amoeba형(型)을 이루는 형질(形質)은 떡갈나무와 같이 각두인편(殼斗鱗片)이 박질세장(薄質細長)한 형질(形質)과 상응(相應)하였다. 4) 화분표면(花粉表面)에 대소과립(大小顆粒)이 혼재(混在)하나 단과립문(單顆粒紋)만 있는 형질(形質)은 상수리나무의 각두(殼斗)와 같이 후질세장(厚質細長)한 각두인편(殼斗鱗片)의 형질(形質)과 상응(相應)하였다. 3. 화분표면(花粉表面)의 무늬형태(形態), 표면미공(表面微孔)의 유무(有無), 화분잎(花粉粒)의 크기 및 과립(顆粒)의 형태(形態)를 수량화(數量化)하여 Cluster분석(分析)을 한 결과(結果)는 기(旣) 식물계통(植物系統) 분류체계(分類體系)와 잘 부합(符合)되었고 종이하수준(種以下水準)에서도 유연관계(有緣關係)를 잘 나타내 주었다.

  • PDF

PVD 코팅법에 의한 ZnO제조 및 특성 (Preparation and characterization of Zinc Oxide films deposition by (PVD))

  • 김성진;박헌균
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2010년도 춘계학술대회 초록집
    • /
    • pp.95.1-95.1
    • /
    • 2010
  • Transparent conducting ZnO films were deposited to apply DSSC Substrate on glass substrates at $500^{\circ}C$ by ionbeam-assisted deposition. Crystallinity, microstructure, surface roughness, chemical composition, electrical and optical properties of the films were investigated as a function of deposition parameters such as ion energy, and substrate temperature. The microstructure of the polycrystalline ZnO films on the glass substrate were closely related to the oxygen ion energy, arrival ratio of oxygen to Zinc Ion bombarded on the growing surface. The main effect of energetic ion bombardment on the growing surface of the film may be divided into two categories; 1) the enhancement of adatom mobility at low energetic ion bombardment and 2) the surface damage by radiation damage at high energetic ion bombardment. The domain structure was obtained in the films deposited at 300 eV. With increasing the ion energy to 600 eV, the domain structure was changed into the grain structure. In case of the low energy ion bombardment of 300 eV, the microstructure of the film was changed from the grain structure to the domain structure with increasing arrival ratio. At the high energy ion bombardment of 600 eV, however, the only grain structure was observed. The electrical properties of the deposited films were significantly related to the change of microstructure. The films with the domain structure had larger carrier concentration and mobility than those with the grain structure, because the grain boundary scattering was reduced in the large size domains compared with the small size grains. The optical transmittance of ZnO films was dependent on a surface roughness. The ZnO films with small surface roughness, represented high transmittance in the visible range because of a decreased light surface scattering. By varying the ion energy and arrival ratio, the resistivity and optical transmittance of the films were varied from $1.1{\times}10^{-4}$ to $2.3{\times}10^{-2}{\Omega}cm$ and from 80 to 87%, respectively. The ZnO film deposited at 300 eV, and substrate temperature of $500^{\circ}C$ had the resistivity of $1.1{\times}10^{-4}{\Omega}cm$ and optical transmittance of 85% in visible range. As a result of experiments, we provides a suggestition that ZnO thin Films can be effectively used as the DSSC substrate Materials.

  • PDF

BaTiO3에서 SiO2 첨가에 의한 비정상 입성장과 단결정 성장 (Effect of SiO2 on Abnormal Grain Growth and Single Crystal Growth in BaTiO3)

  • 김재석;허태무;이종봉;이호용
    • 한국세라믹학회지
    • /
    • 제41권3호
    • /
    • pp.266-271
    • /
    • 2004
  • BaTiO$_3$ 소결체에 국부적으로 SiO$_2$를 첨가하고 열처리하여 비정상 입성장을 유도하였다. 열처리 중에 SiO$_2$가 첨가되지 않은 부분에서는 BaTiO$_3$ 기지상 입자의 성장이 아주 느리게 일어났으나, SiO$_2$가 첨가된 부분에서는 BaTiO$_3$ 기지상 입자가 빠르게 성장하였다. 장시간 열처리 후에는 SiO$_2$가 첨가된 부분에서 비정상 입자가 생성되었고, 열처리 중에 연속적으로 성장하여 2 cm 크기 이상으로 성장하였다. 성장한 비정상 입자내부에는 (111) double twin 또는 single twin 등의 결함이 관찰되지 않아, 국부적으로 첨가된 SiO$_2$에 의하여 생성된 액상에 의하여 비정상 입자와 단결정이 성장하였다. 이러한 결과는 BaTiO$_3$계에서 액상 분포의 불균일으로 비정상 입성장이 유도될 수 있으며, 또한 비정상 입성장을 이용하여 쌍정면 결함을 포함하지 않는 cm크기의 BaTiO$_3$ 단결정을 제조할 수 있음을 보였다.

땅콩의 초형을 주로한 품종군분류 및 그들의 생태적 변이에 관한 연구 (Studies on Grouping of the Varieties by Plant Type and their Ecological Variation for Peanut(Arachis hypogaea L.))

  • 이은섭
    • 한국작물학회지
    • /
    • 제18권
    • /
    • pp.124-155
    • /
    • 1975
  • 땅콩 품종육성의 기초자료와 환경에 대한 변이를 추구하고저 1968년 국내외에서 수집한 489품종을 작물시험장 시험포장에 파종하여 품종군분류를 시도하였으며 1969년에 이들 주요품종군별로 파종기를 4월 16일부터 7월 7일까지 5회 20일간격으로 5회 파종하여 품종군별 파종기에 따른 주요형질의 변이를 조사한바 그 결과를 요약하면 다음과 같다. 1. 땅콩의 분류는 초형을 주로 하고, 종실의 대소, 개화의 조만, 맥당종실수등을 기준으로 Spanish, Virginia Erect, Virginia Runner, Southeast Runner, Valencia, Semirunnerdm 6개군으로 구분하였다. 2. 품종군별 특징은 다음과 같다. (1) Spanish; 직립, 대립, 만생. (2) Virginia Erect; 직립, 대립, 만생. (3) Virginia Runner; 포복, 대립, 만생. (4) Southeast Runner; 포복, 소립, 조생. (5) Valencia; 직립, 소립, 조생, 맥당 3∼4위. (6) Semirunner; 반립, 대립, 만생. 3. 품종군별 개화일수는 파종기가 지연됨에 따라 전반적으로 단축되었으며 단축정도는 만생군에서 컸다. 4. 분기수는 각파종군 모두 만파일수록 감소하는 경향이나 Spanish와 Virginia Runner는 제1파종기에서 오히려 제2파종기보다 적었으며 각 파종기 모두 Spanish가 가장 적고 Virginia Erect가 가장 많았다. 5. 맥실비율은 각품종군 모두 5월 이후의 파종에서 현저히 감소되었으며 어느 파종기에서나 Spanish와 Southeast Runner가 높았다. 6. 맥당종실수는 어느 품종군에서나 파종기가 늦어짐에 따라 현저히 감소되었으며 소립종군보다는 대립종군에서 맥당종실수가 적었다. 7. 개체당맥실중은 각파종기 모두 제2파종기가 가장 무거웠고 제1파종기도 이보다 가벼웠으며 제2파종기이후의 파종에서는 급격히 감소하였고 각파종기 모두 Southeast Runner가 가장 무겁고 Virginia Runner가 가장 가벼웠다. 8. 개체당종실수는 개체당맥실중과 같은 경향이나 각파종기 모두 대립중에서 적고 소립종에서 많았다. 9. 100립중도 제2파종기이후의 감소는 현저하였으며 제1파종기에서도 제2파종기보다 떨어지는 경향이었다. 10. 10a당 수량에 있어서는 각품종군별 파종기에 따른 변이가 현저하였으며 제2파종기인 5월 7일에서 가장 높고, 기타 파종기에서는 감소정도가 현저하였다. 11. 주경장 분지장에 있어서 Spanish는 제1파종기에서 제2파종기보다 작았으며 기타군은 양파종기간에 비슷하였으나 그 이후 파종기에서는 급격히 감소하였다. 12. 수량과 주요형질의 상관에서 개체당맥수, 100립중, 개체당종실수등이 Virginia Runner이외의 품종군에서 수량과 높은 정의 상관이 있었으며 기타형질의 상관은거의 인정할 수 없었으며 파종기에 따른 상관의 차이가 인정되었다.13. 경로계수 분석에 의한 수량에 대한 직접효과는 모든 품종군별 파종기에서 개체당종실수, 개체당맥중 및 100립중에서 컸으며 기타는 미미하였다. 14. 품종군별 유전력은 전체적으로 개체당맥수, 맥실비율, 100립중, 개체당종실수에서 높았으며 기타가 낮았다.

  • PDF

수소 센서용 Pd 첨가한 WO3 박막의 특성 (Characteristics of Pd-doped WO3 thin film for hydrogen gas sensor)

  • 김광호;최광표;권용;박진성
    • 센서학회지
    • /
    • 제15권2호
    • /
    • pp.120-126
    • /
    • 2006
  • Physicochemical and electrical properties for hydrogen gas sensors based on Pd-deposited $WO_3$ thin films were investigated as a function of Pd thickness, annealing temperature, and operating temperature. $WO_3$ thin films were deposited on an insulating material by thermal evaporator. XRD, FE-SEM, AFM, and XPS were used to evaluate the crystal structure, microstructure, surface roughness, and chemical property, respectively. The deposited films were grown $WO_3$ polycrystalline with rhombohedral structure after annealing at $500^{\circ}C$. The addition effect of Pd is not the crystallinity but the suppression of grain growth of $WO_3$. Pd was scattered an isolated small spherical grain on $WO_3$ thin film after annealing at $500^{\circ}C$ and it was agglomerated as an irregular large grain or diffused into $WO_3$ after annealing at $600^{\circ}C$. 2 nm Pd-deposited $WO_3$ thin films operated at $250^{\circ}C$ showed good response and recovery property.

ZnO Ceramic Varistor에 미치는 $TiO_2$$Al(OH)_3$의 영향 (A Study on the Effects of $TiO_2$ and $Al(OH)_3$ for ZnO Ceramic Varistor)

  • 안영필;김복희
    • 한국세라믹학회지
    • /
    • 제19권4호
    • /
    • pp.287-292
    • /
    • 1982
  • Nonohmic properties of ZnO ceramics with various small amounts of additives were studied in relation to experimental methods, additive contant and sintaring temperature. The kinds of additives used to following chemicals were basic additives ($0.5Bi_2O_3$, $0.3BaCO_3$, $0.5MnCO_3$, $0.5Cr_2O_3$, $0.1KNO_3$), $TiO_2$ and $Al(OH)_3$. Expecially, this study has focused on the effectsof $TiO_2$ and $Al(OH)_3$ in ZnO ceramics with the basic additives. SEM studies indicated that the addition of TiO2 promoted grain growth but retarded grain growth with the addition of $Al(OH)_3$. Also, in the case of calcination of ZnO with $TiO_2$ and ZnO with $Al(OH)_3$ previously, grain size of ZnO with $TiO_2$ was larger and that of ZnO with Al(OH)3 was smaller in comparison to the case with out calcination. From the viewpoint of nonohmic exponent and nonohimic resistance, electrical characteristics of ZnO, $TiO_2$ and the basic additives was more effective than that of ZnO, $Al(OH)_3$ and the basic additives. Nonohmic exponent and nonohmic resistance of ZnO, $TiO_2$ and the basic additives was 11-13 and 40-65 respectively.

  • PDF

보론 첨가 저탄소합금강에서 Mn함량과 오스테나이트 결정입도가 경화능에 미치는 영향에 관한 연구 (Study on the Effect of Austenite Grain Size and Mn Content on Hardenability in Boron-added Low Carbon alloys Steels)

  • 허웅렬;노용식;최문성;김영희;이상윤
    • 열처리공학회지
    • /
    • 제3권4호
    • /
    • pp.23-40
    • /
    • 1990
  • This study has been carried out to investigate into some effects of Mn content with varying amounts and austenite grain size on hardenability in boron-added Fe-C-Cr-Mo alloy systems. (1) Austenite grains have been found to hardly grow in the temperature range of $900^{\circ}C$ to $950^{\circ}C$, whereas they grow rapidly in the temperature range of $975^{\circ}C$ to $1100^{\circ}C$. (2) Austenite grain growth is considerably small with increasing holding time at a given austenitizing temperature and is, in particular, hardly found to occur at a temperature of $900^{\circ}C$. (3) The hardenability improves ramarkably as Mn content is increased at three different austenitizing temperatures $900^{\circ}C$, $1000^{\circ}C$ and $1100^{\circ}C$. (4) The maximum hardenability is obtained from steels A, B and C austenitized at the $900^{\circ}C$, although Mn content is varied in each specimen.

  • PDF

The Nutritive Value of Thin Stillage and Wet Distillers' Grains for Ruminants - Review -

  • Mustafa, A.F.;McKinnon, J.J.;Christensen, D.A.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제13권11호
    • /
    • pp.1609-1618
    • /
    • 2000
  • Thin stillage and distillers' grains are byproducts remaining after alcohol distillation from a fermented cereal grain mash. Both byproducts are used as energy and protein sources for ruminants. Due to its liquid nature, more than 50% of thin stillage bypasses the rumen. Thin stillage can be fed alone or in combination with distillers' grains. However, a better utilization by beef cattle is anticipated when thin stillage replaces water as a fluid source. Ruminal undegraded protein content of distillers' grains is greatly affected by type of cereal grain and by drying. Corn distillers' grains have a higher ruminal undegraded protein content than wheat distillers' grains while dried distillers' grains have a higher ruminal undegraded protein content than the wet distillers' grains. Wet and dried distillers' grains can replace up to 50% of corn grain in beef cattle diets without affecting animal performance. The estimated NEg of corn distillers' grains for beef cattle ranges from 100 to 169% of that of corn. In general, wet corn distillers' grains have a higher NEg value than dried corn distillers' grains and the addition of thin stillage improves the NEg of distillers' grains. Improved performance of ruminats fed distillers' byproducts can be attributed to high digestible fiber content, improved rumen environment and a shift in organic matter digestion from the rumen to the small intestine.

열처리 온도에 따른 8YSZ 후막의 미세구조 (Heat Treatment Effect on the Microstructure of 8YSZ Thick Film)

  • 한상훈;노효섭;나동명;김광호;이운영;박진성
    • 한국세라믹학회지
    • /
    • 제48권1호
    • /
    • pp.106-109
    • /
    • 2011
  • In order to fabricate 8YSZ thick film by silk screen printing, YSZ(yttria-stabilized zirconia) commercial powder was used as starting materials. Paste for screen printing was made by mixing 8YSZ powder and organic vehicles. 8YSZ thick film was formed on $Al_2O_3$ substrate. The crystal structure, and microstructure were investigated. Grain size of 8YSZ was increased with increasing calcination temperature and rapid grain growth was shown after calcination at $1300^{\circ}C$. Microstructure showed the mixture of large and small grain size after $1400^{\circ}C$ sintering. Shrinkage rate of 8YSZ thick film sintered at $1400^{\circ}C$ was more than 40%.