• Korean Journal of Remote Sensing
• /
• v.39 no.5_4
• /
• pp.1097-1109
• /
• 2023

Urban is an area where small-scale changes to individual buildings occur frequently. An existing urban building database requires periodic updating to increase its usability. However, there are limitations in data collection for building changes over a wide urban. In this study, we check the possibility of detecting building changes and updating a building database by using satellite images that can capture a wide urban region by a single image. For this purpose, building areas in a satellite image are first extracted by projecting 3D coordinates of building corners available in a building database onto the image. Building areas are then divided into roof and facade areas. By comparing textures of the roof areas projected, building changes such as height change or building removal can be detected. New height values are estimated by adjusting building heights until projected roofs align to actual roofs observed in the image. If the projected image appeared in the image while no building is observed, it corresponds to a demolished building. By checking buildings in the original image whose roofs and facades areas are not projected, new buildings are identified. Based on these results, the building database is updated by the three categories of height update, building deletion, or new building creation. This method was tested with a KOMPSAT-3A image over Incheon Metropolitan City and Incheon building database available in public. Building change detection and building database update was carried out. Updated building corners were then projected to another KOMPSAT-3 image. It was confirmed that building areas projected by updated building information agreed with actual buildings in the image very well. Through this study, the possibility of semi-automatic building change detection and building database update based on single satellite image was confirmed. In the future, follow-up research is needed on technology to enhance computational automation of the proposed method.

• Korean Journal of Environment and Ecology
• /
• v.37 no.5
• /
• pp.327-336
• /
• 2023

This study aimed to propose an effective method for surveying wild birds by comparing the results of bioacoustic detection with those obtained through a field survey. The study sites were located at Dongbaek-dongsan and a 1100-altitude wetland in Jeju-do, South Korea. The bioacoustic detection was conducted over the course of 12 months in 2020. For the bioacoustic detection, a Song-meter SM4 device was installed at each study site, recording bird songs in 1-min per hour, .wav, and 44,100 Hz format. The findings of the field survey were taken from the 「Long-term trends of Bird Community at Dongbaekdongsan and 1100-Highland Wetland of Jeju Island, South Korea.」 by Banjade et al. (2019). The results of this study are as follows. First, the avifauna identified using bioacoustic detection comprised 29 families and 46 species in Dongbaek-dongsan, and 16 families and 25 species in the 1100-altitude wetland. Second, based on the song frequency, the dominant species in Dongbaek-dongsan were Hypsipetes amaurotis (Brown-eared Bulbul, 33.62%), Horornis diphone (Japanese Bush Warbler, 12.13%), and Zosterops japonicus (Warbling White-eye, 9.77%). In the 1100-altitude wetland the dominant species were Corvus macrorhynchos (Large-billed Crow, 27.34%), H. diphone (19.43%), and H. amaurotis (16.56%). Third, in the field survey conducted at Dongbaek-dongsan, the number of detected bird species was 39 in 2009, 51 in 2012, 35 in 2015, and 45 in 2018, while the bioacoustic detection identified 46 species. In the field survey conducted in the 1100-altitude wetland, the number of detected bird species was 37 in 2009, 42 in 2012, 34 in 2015, and 38 in 2018, while the bioacoustics detection identified 25 species. Overall, 43.6% of the 78 species detected in the field survey in Dongbaek-dongsan (34 species) were identified using bioacoustic detection, and 38.3% of the 47 species detected in the field survey in the 1100-altitude wetland (18 species) were identified using bioacoustic detection. Fourth, the bioacoustic detection identified 9 families and 12 species of birds in Dongbaek-dongsan, and 3 families and 7 species of birds in the 1100-altitude wetland. No results from field survey were available for these species. The identified birds were predominantly nocturnal, including Otus sunia (Oriental Scops Owl) and Ninox japonica (Northern Boobook), passage migrants, including Larvivora cyane (Siberian Blue Robin), L. sibilans (Rufous-tailed Robin), and winter visitors with a relatively small number of visiting individuals, such as Bombycilla garrulus (Bohemian Waxwing) and Loxia curvirostra (Red Crossbill). Fifth, the birds detected in the field survey but not through bioacoustic detection included 18 families and 48 species in Dongbaek-dongsan and 14 families and 27 species in the 1100-altitude wetland; the most representative families were Ardeidae, Accipitridae, and Muscicapidae. This study is significant as it provides essential data supporting the possibility of an effective survey combining bioacoustic detection with field studies, given the increasing use of bioacoustic devices in ornithological studies in South Korea.

• Journal of Mushroom
• /
• v.21 no.4
• /
• pp.254-260
• /
• 2023

The characteristics and spore production of Gonji7ho, Bunhong, and Sunjung fruiting bodies were assessed at different growth stages. The shape of the Pleurotus species fruiting body starts out short and small, then takes on a typical mushroom shape as it grows. Gonji7ho has a long stalk, Bunhong has a short stalk and a wide cap, and Sunjung's cap and stalk dimensions are intermediate. Each variety displayed deep color at the beginning of growth but became steadily lighter with continued growth. The shape of the linkage between the mushroom stalk and cap changed from an initial central position to a lateral position after the growing stage. Gonji7ho cap diameter increased 7-fold from 15.5 mm (5 days of growth) to 37.9 mm (9 days of growth). Growth rates for each growth day measured using the growth percentage of the previous day were 285.5% (5 → 6th day), 182.2% (6 → 7th day), 129.4% (7 → 8th day), and 103.8% (8 → 9th day). This trend was also observed in Bunhong and Sunjung, but Bunhong's growth rate was more rapid (4.9 fold on day 6, 2.7 fold on day 7) and continued to increase through day 9. Harvest yield, which is of greatest interest to farmers, displayed a similar trend spanning the growth period, as did cap diameter. Gonji7ho harvest yield increased rapidly until day 7 of growth (more than 177%), then growth slowed down beginning around day 8, and further decreased on day 9 (98%). Similar trends were observed in Bunhong and Sunjung. Bunhong showed characteristic rapid growth in harvest yield (4.9 fold compared to the previous day on day 6 and 2.7 fold on day 7), and the increase continued through day 9. A decrease in mushroom harvest yield commonly seen in the late growth stage is thought to be due to the death of some mushrooms and decomposition of cap tissue. Basidiospore content increased with number of growth days but decreased after day 8. Gonji7ho yielded the highest production on day 7 of growth, coinciding with harvest time, with 209,000,000 spores. This trend was also observed in Bunhong and Sunjung. These results will provide researchers with basal data and guide farmers in selecting the optimal harvest day.

• Korean Journal of Heritage: History & Science
• /
• v.57 no.2
• /
• pp.80-100
• /
• 2024

This paper investigated the major history and reality of iconological composition for Jagyeongjeon Hall's flowered wall in Gyeongbokgung Palace, which was controversial in terms of preservation and management of cultural heritage. While analyzing the moment and cause of the flowered wall's renovation as it is now, modified or disappeared patterns were identified, and meaningfully misinterpreted congratulatory phrases were reviewed. The research results can be used as meaningful basic data when discussions are made for the restoration of the wall in the future. Jagyeongjeon Hall's flowered wall has reached the present day with large and small changes, but the inflection point that had a significant impact was the Joseon Expo (朝鮮博覽會) held at Gyeongbokgung Palace in 1929. This is because the wall that remained in the Jagyeongjeon Hall area was demolished to build an exhibition hall while preparing for the expo, and it was restored after the end of the event. It is highly likely that the modification or disappearance of the patterns constituting Jagyeongjeon Hall's flowered wall was also due to the restoration process carried out after the expo. There is a view that was transformed into its current state in the process of repair work carried out after the Korean War, but it is difficult to find any meaningful circumstances and evidence. Currently, character patterns known as 'Seongnidori(聖人道理)' are arranged on the inner wall of the section from Gyeongdomun Gate(擎桃門) to Yeogangmun Gate(如岡門), but considering the design form and example, it can be read as 'Seongjasinson(聖子神孫)'. The inner wall of the section from Yeogangmun Gate to Yeonsumun Gate(燕壽門) was originally made in the form of a flowered wall, and the phrases presumed to be 'Gyegyeseungseung(繼繼繩繩)' and 'Cheonse(千世)' were arranged. In the case of the section from Yeonsumun Gate to Hamgyumun Gate(含奎門), the inner wall where the pattern has disappeared is originally composed of geometric and character patterns, and there were also phrases specified as 'Cheonsu(千壽)' and 'Mansemansu(萬世萬壽)'. On the outer wall of the section from Yeonsumun Gate to Hamgyumun Gate, there is a possibility that the phrase known as 'Nakgangmanse(樂彊萬歲)' can be read as 'Cheonsemanse(千歲萬歲)'. In addition, the current outer wall was composed of one drawing board, but in the past, two drawing boards were composed separately.

• International Journal of Computer Science & Network Security
• /
• v.24 no.4
• /
• pp.163-169
• /
• 2024

India is a developing nation and has come with comprehensive way in modernizing its reducing poverty, economy and rising living standards for an outsized fragment of its residents. The STEM (Science, Technology, Engineering, and Mathematics) education plays an important role in it. STEM is an educational curriculum that emphasis on the subjects of "science, technology, engineering, and mathematics". In traditional education scenario, these subjects are taught independently, but according to the educational philosophy of STEM that teaches these subjects together in project-based lessons. STEM helps the students in his holistic development. Youth unemployment is the biggest concern due to lack of adequate skills. There is a huge skill gap behind jobless engineers and the question arises how we can prepare engineers for a better tomorrow? Now a day's Industry 4.0 is a new fourth industrial revolution which is an intelligent networking of machines and processes for industry through ICT. It is based upon the usage of cyber-physical systems and Internet of Things (IoT). Industrial revolution does not influence only production but also educational system as well. IoT in academics is a new revolution to the Internet technology, which introduced "Smartness" in the entire IT infrastructure. To improve socio-economic status of the India students must equipped with 21st century digital skills and Universities, colleges must provide individual learning kits to their students which can help them in enhancing their productivity and learning outcomes. The major goal of this paper is to present a low cost, effective learning mechanism for STEM implementation using Raspberry Pi 3+ model (Single board computer) and Node Red open source visual programming tool which is developed by IBM for wiring hardware devices together. These tools are broadly used to provide hands on experience on IoT fundamentals during teaching and learning. This paper elaborates the appropriateness and the practicality of these concepts via an example by implementing a user interface (UI) and Dashboard in Node-RED where dashboard palette is used for demonstration with switch, slider, gauge and Raspberry pi palette is used to connect with GPIO pins present on Raspberry pi board. An LED light is connected with a GPIO pin as an output pin. In this experiment, it is shown that the Node-Red dashboard is accessing on Raspberry pi and via Smartphone as well. In the final step results are shown in an elaborate manner. Conversely, inadequate Programming skills in students are the biggest challenge because without good programming skills there would be no pioneers in engineering, robotics and other areas. Coding plays an important role to increase the level of knowledge on a wide scale and to encourage the interest of students in coding. Today Python language which is Open source and most demanding languages in the industry in order to know data science and algorithms, understanding computer science would not be possible without science, technology, engineering and math. In this paper a small experiment is also done with an LED light via writing source code in python. These tiny experiments are really helpful to encourage the students and give play way to learn these advance technologies. The cost estimation is presented in tabular form for per learning kit provided to the students for Hands on experiments. Some Popular In addition, some Open source tools for experimenting with IoT Technology are described. Students can enrich their knowledge by doing lots of experiments with these freely available software's and this low cost hardware in labs or learning kits provided to them.

• Journal of the Korean Society of Radiology
• /
• v.18 no.1
• /
• pp.45-52
• /
• 2024

In this study, an AI-based algorithm was developed to prevent image quality deterioration and reading errors due to patient movement in PET/CT examinations that use radioisotopes in medical institutions to test cancer and other diseases. Using the Mothion Free software developed using, we checked the degree of correction of movement due to breathing, evaluated its usefulness, and conducted a study for clinical application. The experimental method was to use an RPM Phantom to inject the radioisotope 18F-FDG into a vacuum vial and a sphere of a NEMA IEC body Phantom of different sizes, and to produce images by directing the movement of the radioisotope into a moving lesion during respiration. The vacuum vial had different degrees of movement at different positions, and the spheres of the NEMA IEC body Phantom of different sizes produced different sizes of lesions. Through the acquired images, the lesion volume, maximum SUV, and average SUV were each measured to quantitatively evaluate the degree of motion correction by Motion Free. The average SUV of vacuum vial A, with a large degree of movement, was reduced by 23.36 %, and the error rate of vacuum vial B, with a small degree of movement, was reduced by 29.3 %. The average SUV error rate at the sphere 37mm and 22mm of the NEMA IEC body Phantom was reduced by 29.3 % and 26.51 %, respectively. The average error rate of the four measurements from which the error rate was calculated decreased by 30.03 %, indicating a more accurate average SUV value. In this study, only two-dimensional movements could be produced, so in order to obtain more accurate data, a Phantom that can embody the actual breathing movement of the human body was used, and if the diversity of the range of movement was configured, a more accurate evaluation of usability could be made.

• Journal of Medicine and Life Science
• /
• v.21 no.2
• /
• pp.40-48
• /
• 2024

Understanding the effectiveness of statin treatment is essential for developing tailored stroke prevention strategies. We aimed to evaluate the efficacy of statin treatment in preventing recurrent stroke among patients with various ischemic stroke subtypes. Using data from the Clinical Research Collaboration for Stroke-Korea-National Institute for Health (CRCS-K-NIH) registry, we included patients with acute ischemic stroke admitted between January 2011 and July 2020. To evaluate the differential effects of statin treatment based on the ischemic stroke subtype, we analyzed patients with large artery atherosclerosis (LAA), cardio-embolism (CE), and small vessel occlusion (SVO). The primary outcomes were recurrent ischemic stroke and recurrent stroke events. The hazard ratio for outcomes between statin users and nonusers was compared using a Cox proportional hazards model adjusted for covariates. A total of 46,630 patients who met the inclusion criteria were analyzed. Statins were prescribed to 92%, 93%, and 78% of patients with LAA, SVO, and CE subtypes, respectively. The hazards of recurrent ischemic stroke and recurrent stroke in statin users were reduced to 0.79 (95% confidence interval [CI], 0.63-0.99) and 0.77 (95% CI, 0.62-0.95) in the LAA subtype and 0.63 (95% CI, 0.52-0.76) and 0.63 (95% CI, 0.53-0.75) in CE subtype compared to nonusers. However, the hazards of these outcomes did not significantly decrease in the SVO subtype. The effectiveness of statin treatment in reducing the risk of recurrent stroke in patients with LAA and CE subtypes has been suggested. Nonetheless, no significant effect was observed in the SVO subtype, suggesting a differential effect of statins on different stroke subtypes.

• Bangmulgwan gwa yeongu (The National Museum of Korea Journal)
• /
• v.1
• /
• pp.174-197
• /
• 2024

Personal ornaments made from precious metals that have been excavated from tombs dating to the Maripgan period (4th-6th century) of the Silla Kingdom are a major subject of analysis in the study of gender and hierarchy among the tomb occupants. Nonetheless, bracelets had been neglected until Ha Daeryong's recent research on determining gender through bracelets attracted attention. Accordingly, an examination and organization of the fundamental elements of Silla bracelets was needed. In response, this paper examines their physical characteristics, appearance, changes over time, and related wearing practices. The data for this study is derived from 176 bracelets, mostly made from silver or gold. Copper and glass bracelets are also included. Many of them were cast in a single-use earthen mold. Even the notched and protruding designs were created by casting rather than carving. Glass bracelets and bracelets with dragon designs were made using molds with round cavities. Excluding those produced using metal sheets, the rest of the bracelets are thought to have been cast in a mold with a long-string-shaped cavity and then bent round. After being bent, the two ends were either soldered together (closed type) or left open (open type). As demonstrated in the study by Lee Hansang, Silla bracelets evolved from plain rounded rod-shaped bracelets, such as the one excavated from the Northern Mound of Hwangnamdaechong Tomb, to versions with notched designs, and eventually to those with protruding designs, which gained popularity by the sixth century. The precedents of plain rounded rod-shaped bracelets are presumed to have been thin rod-shaped bracelets from the Proto-Three Kingdoms period. Bracelets need to be fit to the wrists so that they do not slip off easily when worn. The open type design was the preferable way to achieve this. Moreover, given the ductility of gold, silver, and copper, it seems that it would have been possible to stretch or deform them. In the end, I concluded that even if a bracelet is too small to pass man's hand, the open type could have been worn. Furthermore, if a closed-type bracelet were pressed into an oval shape, it would not be impossible for a man to put it on. When bracelets are divided according to their degree of deformability into type A (the open type) through type D, which is almost impossible to deform, type A is commonly found with wearers of thin hollow earrings, and types C and D (which are difficult to deform) are not found with wearers of thin hollow earrings, but only with wearers of thick hollow earrings. Therefore, it can be seen that men were allowed to wear bracelets, and the existing studies that differentiate between men and women based on the wearing of thin hollow earrings, thick hollow earrings, and swords remain valid.

• Journal of Life Science
• /
• v.34 no.1
• /
• pp.48-58
• /
• 2024

Salmonella is a common food-borne intracellular bacterial pathogen that has triggered significant public health concerns. Salmonella hosts' genetic factors play a pivotal role in determining their susceptibility to the pathogen. Cysteine-rich intestinal protein 1 (CRIP1), a member of LIM/double zinc finger protein family, is widely expressed in humans, such as in the lungs, spleen, and especially the gut. Recently, CRIP1 has been reported as a key marker of several immune disorders; however, the effect of CRIP1 on bacterial infection remains unknown. We aimed to elucidate the relationship between Salmonella infection and CRIP1 gene deficiency, as Salmonella spp. is known to invade the Peyer's patches of the small intestine, where CRIP1 is highly expressed. We found that CRIP1-deficient conditions could not alter the characteristics of bone marrow-derived myeloid cells in terms of phagocytosis on macrophages and the activation of costimulatory molecules on dendritic cells using ex vivo differentiation. Moreover, flow cytometry data showed comparable levels of MHCII⁺CD11b⁺CD11c⁺ dendritic cells and MHCII⁺F4/80⁺CD11b⁺ macrophages between WT and CRIP1 knockout (KO) mice. Interestingly, the basal population of monocytes in the spleen and neutrophils in MLNs is more abundant in a steady state of CRIP1 KO mice than WT mice. Here, we demonstrated that the CRIP1 genetic factor plays dispensable roles in host susceptibility to Salmonella Typhimurium infections and the activation of myeloid cells. In addition, differential immune cell populations without antigen exposure in CRIP1 KO mice suggest that the regulation of CRIP1 expression may be a novel immunotherapeutic approach to various infectious diseases.

• Journal of the Korean Society of Radiology
• /
• v.82 no.5
• /
• pp.1258-1273
• /
• 2021

Purpose The balloon-stent technique (BST) has certain strengths as an assisted technique for the treatment of complex aneurysms. After Atlas release, the BST can be executed without an exchange maneuver of the balloon to the stent-delivery catheter. The purpose of this article is to share our experience with the BST using the Scepter-Atlas combination. Materials and Methods Device inspection led us to a simple method to avoid failure in loading Atlas to the Scepter. From March 2018 to December 2019, 57 unruptured distal internal carotid artery (dICA) aneurysms were treated with coil embolization; among which, 25 aneurysms in 23 patients were treated with BST. Clinical and angiographic data were retrospectively collected and reviewed. Results The technical success rate of the Scepter-Atlas combination increased from 50% to 100% after careful inspection. BST angiographic results were comparable to the stent-assisted coil (SAC) group treated during the immediately post-embolization same period (modified Raymond-Roy classification [MRRC] 1 & 2 84% in BST, 96.3% in SAC) and during short-term follow-up (MRRC 1 & 2 95.8% in BST, 88.4% in SAC). A small number of patients showed periprocedural complications, but none had clinical consequences. Conclusion BST using the Scepter-Atlas combination can provide an effective and safe method for the treatment of dICA aneurysms. Scepters can be used as delivery catheters for Atlas.